From: Igal Liberman <igall@xxxxxxxxxxx> When enable_single_wr is not enabled, the DSE will only write those parts of a result descriptor that need updating, which means a final result descriptor will be written in 2 or 3 smaller transfers. When enable_single_wr is enabled the DSE will combine these 2-3 updates into one large write transfer, generally improving performance. Signed-off-by: Igal Liberman <igall@xxxxxxxxxxx> Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx> --- drivers/crypto/inside-secure/safexcel.c | 1 + drivers/crypto/inside-secure/safexcel.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index 99755fc1a161..658b307c6a11 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -329,6 +329,7 @@ static int safexcel_hw_init(struct safexcel_crypto_priv *priv) val = EIP197_HIA_DSE_CFG_DIS_DEBUG; val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(7) | EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(8); val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS); + val |= EIP197_HIA_DSE_CFG_EN_SINGLE_WR; writel(val, priv->base + EIP197_HIA_DSE_CFG); /* Leave the DSE threads reset state */ diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h index 0328a9314b90..b8a81c568c99 100644 --- a/drivers/crypto/inside-secure/safexcel.h +++ b/drivers/crypto/inside-secure/safexcel.h @@ -143,6 +143,7 @@ #define EIP197_HIA_DxE_CFG_CTRL_CACHE_CTRL(n) (((n) & 0x7) << 20) #define EIP197_HIA_DxE_CFG_MAX_CTRL_SIZE(n) ((n) << 24) #define EIP197_HIA_DFE_CFG_DIS_DEBUG (BIT(31) | BIT(29)) +#define EIP197_HIA_DSE_CFG_EN_SINGLE_WR BIT(29) #define EIP197_HIA_DSE_CFG_DIS_DEBUG BIT(31) /* EIP197_HIA_DFE/DSE_THR_CTRL */ -- 2.9.4