Re: Alg errors with Intel QAT Card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 12, 2017 at 03:52:07PM +0000, Benedetto, Salvatore wrote:
> Hi Raj,
> 
> I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
> Are you seeing any of this with a previous kernel version? If not, git bisect might
> help us finding the root-cause.
> Have you tried with another platform/hw?
> 
> Regards,
> Salvatore
> 
Try a soft reboot and see if the error clears up.  This looks a bit reminscient
of some firmware errors we've been chasing down
Neil

> > -----Original Message-----
> > From: linux-crypto-owner@xxxxxxxxxxxxxxx [mailto:linux-crypto-
> > owner@xxxxxxxxxxxxxxx] On Behalf Of Raj Ammanur
> > Sent: Friday, June 9, 2017 7:37 PM
> > To: Linux Crypto Mailing List <linux-crypto@xxxxxxxxxxxxxxx>
> > Subject: Alg errors with Intel QAT Card
> > 
> > Hi
> > 
> > I am seeing the below errors after  installing an Intel QAT card
> > and loading the upstreamed qat_dh895xcc and intel_qat modules.
> > 
> > Have others seen similar errors and know if this is a known issue
> > and a fix exists or know whats going on ? This is with 4.12.0-rc4+
> > version of the kernel.
> > 
> > Any help is sincerely appreciated.
> > 
> > thanks
> > --Raj
> > 
> > 
> > [    3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
> > [    4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> > encryption for qat_aes_cbc
> > [    4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> > at page 0 for qat_aes_ctr
> > [    4.282042] alg: skcipher: Test 4 failed (invalid result) on
> > encryption for qat_aes_xts
> > [    4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> > [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
> > [    1.499336] alg: No test for pkcs1pad(rsa,sha256)
> > (pkcs1pad(rsa-generic,sha256))
> > [    2.562511] SELinux:  Class alg_socket not defined in policy.
> > [    4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> > encryption for qat_aes_cbc
> > [    4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> > at page 0 for qat_aes_ctr
> > [    4.282042] alg: skcipher: Test 4 failed (invalid result) on
> > encryption for qat_aes_xts
> > [    4.367682] alg: akcipher: encrypt test failed. Invalid output
> > [    4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> > [    4.431827] alg: dh: generate public key test failed. Invalid output
> > [    4.431829] alg: dh: test failed on vector 1, err=-22
> > 
> > 
> > 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
> > Subsystem: Intel Corporation Device 0000
> > Physical Slot: 2
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 32 bytes
> > Interrupt: pin A routed to IRQ 35
> > NUMA node: 1
> > Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
> > Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
> > Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
> > Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
> > Address: 0000000000000000  Data: 0000
> > Masking: 00000000  Pending: 00000000
> > Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
> > Vector table: BAR=2 offset=0003b000
> > PBA: BAR=2 offset=0003b800
> > Capabilities: [6c] Power Management version 3
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
> > ,D3cold-)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [74] Express (v2) Endpoint, MSI 00
> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
> > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
> > MaxPayload 256 bytes, MaxReadReq 1024 bytes
> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
> > <512ns, L1 unlimited
> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
> > BWMgmt- ABWMgmt-
> > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
> > Supported
> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> > Disabled
> > AtomicOpsCtl: ReqEn-
> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> >  Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> > ComplianceSOS-
> >  Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> > EqualizationPhase1-
> >  EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> > Capabilities: [100 v1] Advanced Error Reporting
> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > MalfTLP- ECRC- UnsupReq- ACSViol-
> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > MalfTLP- ECRC- UnsupReq- ACSViol-
> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> > MalfTLP+ ECRC- UnsupReq- ACSViol-
> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> > Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
> > ARICap: MFVC- ACS-, Next Function: 0
> > ARICtl: MFVC- ACS-, Function Group: 0
> > Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
> > IOVCap: Migration-, Interrupt Message Number: 000
> > IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
> > IOVSta: Migration-
> > Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
> > VF offset: 8, stride: 1, Device ID: 0443
> > Supported Page Size: 00000553, System Page Size: 00000001
> > Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
> > Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
> > VF Migration: offset: 00000000, BIR: 0
> > Kernel driver in use: dh895xcc
> > Kernel modules: qat_dh895xcc
> > 
> > 
> > # lsmod | grep qat
> > qat_dh895xcc           16384  1
> > intel_qat             126976  13 qat_dh895xcc
> > dh_generic             16384  1 intel_qat
> > authenc                16384  1 intel_qat
> > 
> > # modinfo qat_dh895xcc
> > filename:
> > /lib/modules/4.12.0-
> > rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
> > version:        0.6.0
> > description:    Intel(R) QuickAssist Technology
> > firmware:       qat_895xcc.bin
> > author:         Intel
> > license:        Dual BSD/GPL
> > srcversion:     37370A80B9807EC2308F493
> > alias:          pci:v00008086d00000435sv*sd*bc*sc*i*
> > depends:        intel_qat
> > intree:         Y
> > vermagic:       4.12.0-rc4+ SMP mod_unload
> > signat:         PKCS#7
> > signer:
> > sig_key:
> > sig_hashalgo:   md4



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux