Re: [PATCH v2 2/3] crypto: inside-secure: add SafeXcel EIP197 crypto engine driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello

I have some minor comment below

On Wed, Apr 19, 2017 at 09:14:17AM +0200, Antoine Tenart wrote:
> Add support for Inside Secure SafeXcel EIP197 cryptographic engine,
> which can be found on Marvell Armada 7k and 8k boards. This driver
> currently implements: ecb(aes), cbc(aes), sha1, sha224, sha256 and
> hmac(sah1) algorithms.
> 
> Two firmwares are needed for this engine to work. Their are mostly used
> for more advanced operations than the ones supported (as of now), but we
> still need them to pass the data to the internal cryptographic engine.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/crypto/Kconfig                         |   17 +
>  drivers/crypto/Makefile                        |    1 +
>  drivers/crypto/inside-secure/Makefile          |    2 +
>  drivers/crypto/inside-secure/safexcel.c        |  940 +++++++++++++++++++++
>  drivers/crypto/inside-secure/safexcel.h        |  579 +++++++++++++
>  drivers/crypto/inside-secure/safexcel_cipher.c |  555 +++++++++++++
>  drivers/crypto/inside-secure/safexcel_hash.c   | 1060 ++++++++++++++++++++++++
>  drivers/crypto/inside-secure/safexcel_ring.c   |  157 ++++
>  8 files changed, 3311 insertions(+)
>  create mode 100644 drivers/crypto/inside-secure/Makefile
>  create mode 100644 drivers/crypto/inside-secure/safexcel.c
>  create mode 100644 drivers/crypto/inside-secure/safexcel.h
>  create mode 100644 drivers/crypto/inside-secure/safexcel_cipher.c
>  create mode 100644 drivers/crypto/inside-secure/safexcel_hash.c
>  create mode 100644 drivers/crypto/inside-secure/safexcel_ring.c
> 
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 473d31288ad8..d12a40450858 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -619,4 +619,21 @@ config CRYPTO_DEV_BCM_SPU
>  	  Secure Processing Unit (SPU). The SPU driver registers ablkcipher,
>  	  ahash, and aead algorithms with the kernel cryptographic API.
>  

[...]

> +	/*
> +	 * Result Descriptor Ring prepare
> +	 */

This is not preferred comment format for one line

[...]

> +static int safexcel_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	struct safexcel_crypto_priv *priv;
> +	int i, ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(struct safexcel_crypto_priv),
> +			    GFP_KERNEL);

sizeof(priv) is preferred as asked by checkpatch

[...]
> +		ring_irq = devm_kzalloc(dev, sizeof(struct safexcel_ring_irq_data),
> +					GFP_KERNEL);

same comment here

[...]
> +#define EIP197_ALG_ARC4				BIT(7)
> +#define EIP197_ALG_AES_ECB			BIT(8)
> +#define EIP197_ALG_AES_CBC			BIT(9)
> +#define EIP197_ALG_AES_CTR_ICM			BIT(10)
> +#define EIP197_ALG_AES_OFB			BIT(11)
> +#define EIP197_ALG_AES_CFB			BIT(12)
> +#define EIP197_ALG_DES_ECB			BIT(13)
> +#define EIP197_ALG_DES_CBC			BIT(14)
> +#define EIP197_ALG_DES_OFB			BIT(16)
> +#define EIP197_ALG_DES_CFB			BIT(17)
> +#define EIP197_ALG_3DES_ECB			BIT(18)
> +#define EIP197_ALG_3DES_CBC			BIT(19)
> +#define EIP197_ALG_3DES_OFB			BIT(21)
> +#define EIP197_ALG_3DES_CFB			BIT(22)
> +#define EIP197_ALG_MD5				BIT(24)
> +#define EIP197_ALG_HMAC_MD5			BIT(25)

Does MD5, DES and 3DES will be added later ?

[...]
> +static const u8 sha1_zero_digest[SHA1_DIGEST_SIZE] = {
> +	0xda, 0x39, 0xa3, 0xee, 0x5e, 0x6b, 0x4b, 0x0d, 0x32, 0x55,
> +	0xbf, 0xef, 0x95, 0x60, 0x18, 0x90, 0xaf, 0xd8, 0x07, 0x09,
> +};
> +
> +static const u8 sha224_zero_digest[SHA224_DIGEST_SIZE] = {
> +	0xd1, 0x4a, 0x02, 0x8c, 0x2a, 0x3a, 0x2b, 0xc9, 0x47, 0x61,
> +	0x02, 0xbb, 0x28, 0x82, 0x34, 0xc4, 0x15, 0xa2, 0xb0, 0x1f,
> +	0x82, 0x8e, 0xa6, 0x2a, 0xc5, 0xb3, 0xe4, 0x2f
> +};
> +
> +static const u8 sha256_zero_digest[SHA256_DIGEST_SIZE] = {
> +	0xe3, 0xb0, 0xc4, 0x42, 0x98, 0xfc, 0x1c, 0x14, 0x9a, 0xfb,
> +	0xf4, 0xc8, 0x99, 0x6f, 0xb9, 0x24, 0x27, 0xae, 0x41, 0xe4,
> +	0x64, 0x9b, 0x93, 0x4c, 0xa4, 0x95, 0x99, 0x1b, 0x78, 0x52,
> +	0xb8, 0x55
> +};

Thoses structures are already defined in crypto (sha1_zero_message_hash, etc...)
You can use it since you select SHAxxx in Kconfig

[...]
> +static int safexcel_hmac_init_pad(struct ahash_request *areq,
> +				  unsigned int blocksize, const u8 *key,
> +				  unsigned int keylen, u8 *ipad, u8 *opad)
> +{
> +	struct safexcel_ahash_result result;
> +	struct scatterlist sg;
> +	int ret, i;
> +	u8 *keydup;
> +
> +	if (keylen <= blocksize) {
> +		memcpy(ipad, key, keylen);
> +	} else {
> +		keydup = kmemdup(key, keylen, GFP_KERNEL);
> +		if (!keydup)
> +			return -ENOMEM;
> +
> +		ahash_request_set_callback(areq, CRYPTO_TFM_REQ_MAY_BACKLOG,
> +					   safexcel_ahash_complete, &result);
> +		sg_init_one(&sg, keydup, keylen);
> +		ahash_request_set_crypt(areq, &sg, ipad, keylen);
> +		init_completion(&result.completion);
> +
> +		ret = crypto_ahash_digest(areq);
> +		if (ret == -EINPROGRESS) {
> +			wait_for_completion_interruptible(&result.completion);
> +			ret = result.error;
> +		}
> +
> +		/* Avoid leaking */
> +		memset(keydup, 0, keylen);

It is safer to use memzero_explicit

> +		kfree(keydup);
> +
> +		if (ret)
> +			return ret;
> +
> +		keylen = crypto_ahash_digestsize(crypto_ahash_reqtfm(areq));
> +	}
> +
> +	memset(ipad + keylen, 0, blocksize - keylen);
> +	memcpy(opad, ipad, blocksize);
> +
> +	for (i = 0; i < blocksize; i++) {
> +		ipad[i] ^= 0x36;
> +		opad[i] ^= 0x5c;

What are these constant ?

[...]
> +static int safexcel_hmac_sha1_setkey(struct crypto_ahash *tfm, const u8 *key,
> +				     unsigned int keylen)
> +{
> +	struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(crypto_ahash_tfm(tfm));
> +	struct safexcel_ahash_export_state istate, ostate;
> +	int ret, i;
> +
> +	ret = safexcel_hmac_setkey("safexcel-sha1", key, keylen, &istate, &ostate);

Perhaps you could use the algname instead of "safexcel-sha1"

> +	if (ret)
> +		return ret;
> +
> +	memcpy(ctx->ipad, &istate.state, SHA1_DIGEST_SIZE);
> +	memcpy(ctx->opad, &ostate.state, SHA1_DIGEST_SIZE);

Perhaps you could the digest_size from alg_template

[...]
> +struct safexcel_alg_template safexcel_alg_sha256 = {
> +	.type = SAFEXCEL_ALG_TYPE_AHASH,
> +	.alg.ahash = {
> +		.init = safexcel_sha256_init,
> +		.update = safexcel_ahash_update,
> +		.final = safexcel_ahash_final,
> +		.finup = safexcel_ahash_finup,
> +		.digest = safexcel_sha256_digest,
> +		.export = safexcel_ahash_export,
> +		.import = safexcel_ahash_import,
> +		.halg = {
> +			.digestsize = SHA256_DIGEST_SIZE,
> +			.statesize = sizeof(struct safexcel_ahash_export_state),
> +			.base = {
> +				.cra_name = "sha256",
> +				.cra_driver_name = "safexcel-sha256",
> +				.cra_priority = 300,
> +				.cra_flags = CRYPTO_ALG_ASYNC |
> +					     CRYPTO_ALG_KERN_DRIVER_ONLY,

Why do use CRYPTO_ALG_KERN_DRIVER_ONLY ?

Regards
Corentin Labbe



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux