On Wed, Mar 29, 2017 at 02:44:25PM +0200, Antoine Tenart wrote: > Hi all, > > This series adds support for the Inside Secure SafeXcel EIP197 > cryptographic engine which can be found on Marvell Armada 7k and 8k > boards. A new cryptographic engine driver is added, as well as the > relevant device tree definition for the Armada 7040 DB and 8040 DB > boards. > > This driver needs two firmwares to work correctly. These firmware are > usually used for more advanced operations than the ones supported (as of > now), but we still need them to pass the data to the internal > cryptographic engine. > > This series was tested in various ways on both the Armada 7040 DB and > the Armada 8040 DB: using the crypto framework self tests, using tcrypt > and while performing various transfers with iperf on top of IPsec. > > This series is based on top of v4.11-rc1, and is available on a branch > (which also contains the PPv2 support for 7k/8k, to ease the process of > testing IPsec): https://github.com/atenart/linux v4.11-rc1/7k8k-crypto > I can rebase if needed. > > Thanks, > Antoine > > > Antoine Tenart (7): > Documentation/bindings: Document the SafeXel cryptographic engine > driver > crypto: inside-secure: add SafeXcel EIP197 crypto engine driver > MAINTAINERS: add a maintainer for the Inside Secure crypto driver > arm64: marvell: dts: add crypto engine description for 7k/8k > arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB > arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB > arm64: defconfig: enable the Safexcel crypto engine as a module I have no problems with the crypto bits. Thanks, -- Email: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
