On 26 March 2017 at 21:31, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> On Sun, Mar 26, 2017 at 08:50:42PM +0530, PrasannaKumar Muralidharan wrote:
>> .Have some minor comments. Please feel free to correct if I am wrong.
>>
>> On 25 March 2017 at 21:56, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>> > diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c
>> > new file mode 100644
>> > index 000000000000..d657b6243d0a
>> > --- /dev/null
>> > +++ b/drivers/crypto/exynos-rng.c
>> > @@ -0,0 +1,390 @@
>> > +/*
>> > + * exynos-rng.c - Random Number Generator driver for the Exynos
>> > + *
>> > + * Copyright (c) 2017 Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>> > + *
>> > + * Loosely based on old driver from drivers/char/hw_random/exynos-rng.c:
>> > + * Copyright (C) 2012 Samsung Electronics
>> > + * Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License as published by
>> > + * the Free Software Foundation;
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > + * GNU General Public License for more details.
>> > + */
>> > +
>> > +#include <linux/clk.h>
>> > +#include <linux/crypto.h>
>> > +#include <linux/err.h>
>> > +#include <linux/io.h>
>> > +#include <linux/module.h>
>> > +#include <linux/platform_device.h>
>> > +
>> > +#include <crypto/internal/rng.h>
>> > +
>> > +#define EXYNOS_RNG_CONTROL 0x0
>> > +#define EXYNOS_RNG_STATUS 0x10
>> > +#define EXYNOS_RNG_SEED_BASE 0x140
>> > +#define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4))
>> > +#define EXYNOS_RNG_OUT_BASE 0x160
>> > +#define EXYNOS_RNG_OUT(n) (EXYNOS_RNG_OUT_BASE + (n * 0x4))
>> > +
>> > +/* EXYNOS_RNG_CONTROL bit fields */
>> > +#define EXYNOS_RNG_CONTROL_START 0x18
>> > +/* EXYNOS_RNG_STATUS bit fields */
>> > +#define EXYNOS_RNG_STATUS_SEED_SETTING_DONE BIT(1)
>> > +#define EXYNOS_RNG_STATUS_RNG_DONE BIT(5)
>> > +
>> > +/* Five seed and output registers, each 4 bytes */
>> > +#define EXYNOS_RNG_SEED_REGS 5
>> > +#define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4)
>> > +
>> > +/*
>> > + * Driver re-seeds itself with generated random numbers to increase
>> > + * the randomness.
>> > + *
>> > + * Time for next re-seed in ms.
>> > + */
>> > +#define EXYNOS_RNG_RESEED_TIME 100
>> > +/*
>> > + * In polling mode, do not wait infinitely for the engine to finish the work.
>> > + */
>> > +#define EXYNOS_RNG_WAIT_RETRIES 100
>> > +
>> > +/* Context for crypto */
>> > +struct exynos_rng_ctx {
>> > + struct exynos_rng_dev *rng;
>> > +};
>>
>> Is exynos_rng_ctx really necessary? Can't exynos_rng_dev be used directly?
>>
>
> I couldn't find a way to pass an instance of exynos_rng_dev to
> generate() and seed() calls.
While registering rng, sizeof exynos_rng_ctx is provided. Assumed that
the space allocated can be used instead of storing a reference to it.
Looking at crypto/rng.c I understand it could not be used.
>> > +/* Device associated memory */
>> > +struct exynos_rng_dev {
>> > + struct device *dev;
>> > + struct exynos_rng_ctx *ctx;
>> > + void __iomem *mem;
>> > + struct clk *clk;
>> > + /* Generated numbers stored for seeding during resume */
>> > + u8 seed_save[EXYNOS_RNG_SEED_SIZE];
>> > + unsigned int seed_save_len;
>> > + /* Time of last seeding in jiffies */
>> > + unsigned long last_seeding;
>> > +};
>>
>> Wondering if storing 'ctx' is really necessary. Can that be eliminated?
>
> Yes, it can.
>
>> > +static struct exynos_rng_dev *exynos_rng_dev;
>>
>> Having an instance of exynos_rng_dev makes this driver to work with
>> only 1 rng hardware block. Is this desired?
>
> First of all, there is only one hardware block. ioremap_resource also
> ensures that. Second of all, how would you like to pass the
> platform device specific data to crypto calls?
Understood. See above.
>> Also having an instance of exynos_rng_dev seems unnecessary. Can it be removed?
>
> Why do you think it is unnecessary?
See above.
>>
>> > +static u32 exynos_rng_readl(struct exynos_rng_dev *rng, u32 offset)
>> > +{
>> > + return readl_relaxed(rng->mem + offset);
>> > +}
>> > +
>> > +static void exynos_rng_writel(struct exynos_rng_dev *rng, u32 val, u32 offset)
>> > +{
>> > + writel_relaxed(val, rng->mem + offset);
>> > +}
>> > +
>> > +static int exynos_rng_set_seed(struct exynos_rng_dev *rng,
>> > + const u8 *seed, unsigned int slen)
>> > +{
>> > + u32 val;
>> > + int i;
>> > +
>> > + dev_dbg(rng->dev, "Seeding with %u bytes\n", slen);
>>
>> This log can be put after the 'slen < EXYNOS_RNG_SEED_SIZE' condition check.
>
> It can be put there but what is the benefit? The purpose of this log was
> to show the start of seeding so the beginning of function seems very
> natural to me.
>
>>
>> > + if (slen < EXYNOS_RNG_SEED_SIZE) {
>> > + dev_warn(rng->dev, "Seed too short (only %u bytes)\n", slen);
>> > + return -EINVAL;
>> > + }
>>
>> Will it be helpful to print the required seed size?
>
> It is in /proc/crypto... It is not a problem to print it but isn't that
> redundant?
Not necessary if it is already available.
>>
>> Also wondering if the seed size check is required as it is given as a
>> parameter while registering with crypto framework.
>
> Still the framework might pass something smaller but the size is a
> strict requirement by the code below and by the HW engine.
Okay. Got it.
>>
>> > + for (i = 0 ; i < EXYNOS_RNG_SEED_REGS ; i++) {
>> > + val = seed[i * 4] << 24;
>> > + val |= seed[i * 4 + 1] << 16;
>> > + val |= seed[i * 4 + 2] << 8;
>> > + val |= seed[i * 4 + 3] << 0;
>> > +
>> > + exynos_rng_writel(rng, val, EXYNOS_RNG_SEED(i));
>> > + }
>> > +
>> > + val = exynos_rng_readl(rng, EXYNOS_RNG_STATUS);
>> > + if (!(val & EXYNOS_RNG_STATUS_SEED_SETTING_DONE)) {
>> > + dev_warn(rng->dev, "Seed setting not finished\n");
>> > + return -EIO;
>> > + }
>> > +
>> > + rng->last_seeding = jiffies;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +/*
>> > + * Read from output registers and put the data under 'dst' array,
>> > + * up to dlen bytes.
>> > + *
>> > + * Returns number of bytes actually stored in 'dst' (dlen
>> > + * or EXYNOS_RNG_SEED_SIZE).
>> > + */
>> > +static unsigned int exynos_rng_copy_random(struct exynos_rng_dev *rng,
>> > + u8 *dst, unsigned int dlen)
>> > +{
>> > + unsigned int cnt = 0;
>> > + int i, j;
>> > + u32 val;
>> > +
>> > + for (j = 0; j < EXYNOS_RNG_SEED_REGS; j++) {
>> > + val = exynos_rng_readl(rng, EXYNOS_RNG_OUT(j));
>> > +
>> > + for (i = 0; i < 4; i++) {
>> > + dst[cnt] = val & 0xff;
>> > + val >>= 8;
>> > + if (++cnt >= dlen)
>> > + return cnt;
>> > + }
>> > + }
>> > +
>> > + return cnt;
>> > +}
>> > +
>> > +/*
>> > + * Start the engine and poll for finish. Then read from output registers
>> > + * filling the 'dst' buffer up to 'dlen' bytes or up to size of generated
>> > + * random data (EXYNOS_RNG_SEED_SIZE).
>> > + *
>> > + * On success: return 0 and store number of read bytes under 'read' address.
>> > + * On error: return -ERRNO.
>> > + */
>> > +static int exynos_rng_get_random(struct exynos_rng_dev *rng,
>> > + u8 *dst, unsigned int dlen,
>> > + unsigned int *read)
>> > +{
>> > + int retry = EXYNOS_RNG_WAIT_RETRIES;
>> > +
>> > + exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START,
>> > + EXYNOS_RNG_CONTROL);
>> > +
>> > + while (!(exynos_rng_readl(rng,
>> > + EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry)
>> > + cpu_relax();
>> > +
>> > + if (!retry)
>> > + return -ETIMEDOUT;
>>
>> What would happen if the RNG block could not calculate data within the
>> timeout but did calculate random data after the timeout? In that case
>> the status bit would not have not been cleared. Will that cause an
>> issue?
>
> In such case we do not have control over it anyway. If HW does not work,
> then driver cannot fix it. I am not sure how would you want to handle
> such case?
If this case happens when HW does not work logging it will be helpful.
I do not have clear idea of how to handle this case but someone with
better exynos knowledge can provide more insight.
>>
>> > + /* Clear status bit */
>> > + exynos_rng_writel(rng, EXYNOS_RNG_STATUS_RNG_DONE,
>> > + EXYNOS_RNG_STATUS);
>> > +
>> > + *read = exynos_rng_copy_random(rng, dst, dlen);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +/* Re-seed itself from time to time */
>> > +static void exynos_rng_reseed(struct exynos_rng_dev *rng)
>> > +{
>> > + unsigned long next_seeding = rng->last_seeding + \
>> > + msecs_to_jiffies(EXYNOS_RNG_RESEED_TIME);
>> > + unsigned long now = jiffies;
>> > + u8 seed[EXYNOS_RNG_SEED_SIZE];
>> > + unsigned int read;
>> > +
>> > + if (time_before(now, next_seeding))
>> > + return;
>> > +
>> > + if (exynos_rng_get_random(rng, seed, sizeof(seed), &read))
>> > + return;
>> > +
>> > + exynos_rng_set_seed(rng, seed, read);
>> > +}
>> > +
>> > +static int exynos_rng_generate(struct crypto_rng *tfm,
>> > + const u8 *src, unsigned int slen,
>> > + u8 *dst, unsigned int dlen)
>> > +{
>> > + struct exynos_rng_ctx *ctx = crypto_rng_ctx(tfm);
>> > + struct exynos_rng_dev *rng = ctx->rng;
>> > + unsigned int read = 0;
>> > + int ret;
>> > +
>> > + ret = clk_prepare_enable(rng->clk);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + do {
>> > + ret = exynos_rng_get_random(rng, dst, dlen, &read);
>> > + if (ret)
>> > + break;
>> > +
>> > + dlen -= read;
>> > + dst += read;
>> > +
>> > + exynos_rng_reseed(rng);
>> > + } while (dlen > 0);
>> > +
>> > + clk_disable_unprepare(rng->clk);
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +static int exynos_rng_seed(struct crypto_rng *tfm, const u8 *seed,
>> > + unsigned int slen)
>> > +{
>> > + struct exynos_rng_ctx *ctx = crypto_rng_ctx(tfm);
>> > + struct exynos_rng_dev *rng = ctx->rng;
>> > + int ret;
>> > +
>> > + ret = clk_prepare_enable(rng->clk);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + ret = exynos_rng_set_seed(ctx->rng, seed, slen);
>> > +
>> > + clk_disable_unprepare(rng->clk);
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +static int exynos_rng_kcapi_init(struct crypto_tfm *tfm)
>> > +{
>> > + struct exynos_rng_ctx *ctx = crypto_tfm_ctx(tfm);
>> > +
>> > + ctx->rng = exynos_rng_dev;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static struct rng_alg exynos_rng_alg = {
>> > + .generate = exynos_rng_generate,
>> > + .seed = exynos_rng_seed,
>> > + .seedsize = EXYNOS_RNG_SEED_SIZE,
>> > + .base = {
>> > + .cra_name = "exynos_rng",
>> > + .cra_driver_name = "exynos_rng",
>> > + .cra_priority = 100,
>> > + .cra_ctxsize = sizeof(struct exynos_rng_ctx),
>> > + .cra_module = THIS_MODULE,
>> > + .cra_init = exynos_rng_kcapi_init,
>> > + }
>> > +};
>> > +
>> > +static int exynos_rng_probe(struct platform_device *pdev)
>> > +{
>> > + struct exynos_rng_dev *rng;
>> > + struct resource *res;
>> > + int ret;
>> > +
>> > + if (exynos_rng_dev)
>> > + return -EEXIST;
>> > +
>> > + rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
>> > + if (!rng)
>> > + return -ENOMEM;
>> > +
>> > + rng->dev = &pdev->dev;
>> > + rng->clk = devm_clk_get(&pdev->dev, "secss");
>> > + if (IS_ERR(rng->clk)) {
>> > + dev_err(&pdev->dev, "Couldn't get clock.\n");
>> > + return PTR_ERR(rng->clk);
>> > + }
>> > +
>> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> > + rng->mem = devm_ioremap_resource(&pdev->dev, res);
>> > + if (IS_ERR(rng->mem))
>> > + return PTR_ERR(rng->mem);
>> > +
>> > + platform_set_drvdata(pdev, rng);
>> > +
>> > + exynos_rng_dev = rng;
>> > +
>> > + ret = crypto_register_rng(&exynos_rng_alg);
>>
>> Do you mind adding devm_crypto_register_rng? If added the .remove
>> method will become unnecessary and error handling code can be removed.
>
> There is no devm_crypto_register_rng(). First it would have to be added.
> That is out of scope of this patch.
Yeah true, it is out of scope.
>>
>> > + if (ret) {
>> > + dev_err(&pdev->dev,
>> > + "Couldn't register rng crypto alg: %d\n", ret);
>> > + exynos_rng_dev = NULL;
>> > + }
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +static int exynos_rng_remove(struct platform_device *pdev)
>> > +{
>> > + crypto_unregister_rng(&exynos_rng_alg);
>> > +
>> > + exynos_rng_dev = NULL;
>>
>> This looks unnecessary as the module is unloading.
>
> I think it is necessary, because remove is called on unbind. Re-binding
> a device will not cause static memory to be initialized.
Makes sense.
FWIW, you can add:
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
Regards,
PrasannaKumar
FWIW, can add Reviewed-by: PrasannaKumar Muralidharan
<prasannatsmkumar@xxxxxxxxx>.
