Re: [RFC PATCH v2 16/32] x86: kvm: Provide support to create Guest and HV shared per-CPU variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/03/2017 16:15, Brijesh Singh wrote:
> Some KVM specific MSR's (steal-time, asyncpf, avic_eio) allocates per-CPU
> variable at compile time and share its physical address with hypervisor.
> It presents a challege when SEV is active in guest OS. When SEV is active,
> guest memory is encrypted with guest key and hypervisor will no longer able
> to modify the guest memory. When SEV is active, we need to clear the
> encryption attribute of shared physical addresses so that both guest and
> hypervisor can access the data.
> 
> To solve this problem, I have tried these three options:
> 
> 1) Convert the static per-CPU to dynamic per-CPU allocation. When SEV is
> detected then clear the encryption attribute. But while doing so I found
> that per-CPU dynamic allocator was not ready when kvm_guest_cpu_init was
> called.
> 
> 2) Since the encryption attributes works on PAGE_SIZE hence add some extra
> padding to 'struct kvm-steal-time' to make it PAGE_SIZE and then at runtime
> clear the encryption attribute of the full PAGE. The downside of this was
> now we need to modify structure which may break the compatibility.
> 
> 3) Define a new per-CPU section (.data..percpu.hv_shared) which will be
> used to hold the compile time shared per-CPU variables. When SEV is
> detected we map this section with encryption attribute cleared.
> 
> This patch implements #3. It introduces a new DEFINE_PER_CPU_HV_SHAHRED
> macro to create a compile time per-CPU variable. When SEV is detected we
> map the per-CPU variable as decrypted (i.e with encryption attribute cleared).
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>

Looks good to me.

Paolo

> ---
>  arch/x86/kernel/kvm.c             |   43 +++++++++++++++++++++++++++++++------
>  include/asm-generic/vmlinux.lds.h |    3 +++
>  include/linux/percpu-defs.h       |    9 ++++++++
>  3 files changed, 48 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
> index 099fcba..706a08e 100644
> --- a/arch/x86/kernel/kvm.c
> +++ b/arch/x86/kernel/kvm.c
> @@ -75,8 +75,8 @@ static int parse_no_kvmclock_vsyscall(char *arg)
>  
>  early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall);
>  
> -static DEFINE_PER_CPU(struct kvm_vcpu_pv_apf_data, apf_reason) __aligned(64);
> -static DEFINE_PER_CPU(struct kvm_steal_time, steal_time) __aligned(64);
> +static DEFINE_PER_CPU_HV_SHARED(struct kvm_vcpu_pv_apf_data, apf_reason) __aligned(64);
> +static DEFINE_PER_CPU_HV_SHARED(struct kvm_steal_time, steal_time) __aligned(64);
>  static int has_steal_clock = 0;
>  
>  /*
> @@ -290,6 +290,22 @@ static void __init paravirt_ops_setup(void)
>  #endif
>  }
>  
> +static int kvm_map_percpu_hv_shared(void *addr, unsigned long size)
> +{
> +	/* When SEV is active, the percpu static variables initialized
> +	 * in data section will contain the encrypted data so we first
> +	 * need to decrypt it and then map it as decrypted.
> +	 */
> +	if (sev_active()) {
> +		unsigned long pa = slow_virt_to_phys(addr);
> +
> +		sme_early_decrypt(pa, size);
> +		return early_set_memory_decrypted(addr, size);
> +	}
> +
> +	return 0;
> +}
> +
>  static void kvm_register_steal_time(void)
>  {
>  	int cpu = smp_processor_id();
> @@ -298,12 +314,17 @@ static void kvm_register_steal_time(void)
>  	if (!has_steal_clock)
>  		return;
>  
> +	if (kvm_map_percpu_hv_shared(st, sizeof(*st))) {
> +		pr_err("kvm-stealtime: failed to map hv_shared percpu\n");
> +		return;
> +	}
> +
>  	wrmsrl(MSR_KVM_STEAL_TIME, (slow_virt_to_phys(st) | KVM_MSR_ENABLED));
>  	pr_info("kvm-stealtime: cpu %d, msr %llx\n",
>  		cpu, (unsigned long long) slow_virt_to_phys(st));
>  }
>  
> -static DEFINE_PER_CPU(unsigned long, kvm_apic_eoi) = KVM_PV_EOI_DISABLED;
> +static DEFINE_PER_CPU_HV_SHARED(unsigned long, kvm_apic_eoi) = KVM_PV_EOI_DISABLED;
>  
>  static notrace void kvm_guest_apic_eoi_write(u32 reg, u32 val)
>  {
> @@ -327,25 +348,33 @@ static void kvm_guest_cpu_init(void)
>  	if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF) && kvmapf) {
>  		u64 pa = slow_virt_to_phys(this_cpu_ptr(&apf_reason));
>  
> +		if (kvm_map_percpu_hv_shared(this_cpu_ptr(&apf_reason),
> +					sizeof(struct kvm_vcpu_pv_apf_data)))
> +			goto skip_asyncpf;
>  #ifdef CONFIG_PREEMPT
>  		pa |= KVM_ASYNC_PF_SEND_ALWAYS;
>  #endif
>  		wrmsrl(MSR_KVM_ASYNC_PF_EN, pa | KVM_ASYNC_PF_ENABLED);
>  		__this_cpu_write(apf_reason.enabled, 1);
> -		printk(KERN_INFO"KVM setup async PF for cpu %d\n",
> -		       smp_processor_id());
> +		printk(KERN_INFO"KVM setup async PF for cpu %d msr %llx\n",
> +		       smp_processor_id(), pa);
>  	}
> -
> +skip_asyncpf:
>  	if (kvm_para_has_feature(KVM_FEATURE_PV_EOI)) {
>  		unsigned long pa;
>  		/* Size alignment is implied but just to make it explicit. */
>  		BUILD_BUG_ON(__alignof__(kvm_apic_eoi) < 4);
> +		if (kvm_map_percpu_hv_shared(this_cpu_ptr(&kvm_apic_eoi),
> +					sizeof(unsigned long)))
> +			goto skip_pv_eoi;
>  		__this_cpu_write(kvm_apic_eoi, 0);
>  		pa = slow_virt_to_phys(this_cpu_ptr(&kvm_apic_eoi))
>  			| KVM_MSR_ENABLED;
>  		wrmsrl(MSR_KVM_PV_EOI_EN, pa);
> +		printk(KERN_INFO"KVM setup PV EOI for cpu %d msr %lx\n",
> +		       smp_processor_id(), pa);
>  	}
> -
> +skip_pv_eoi:
>  	if (has_steal_clock)
>  		kvm_register_steal_time();
>  }
> diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
> index 0968d13..8d29910 100644
> --- a/include/asm-generic/vmlinux.lds.h
> +++ b/include/asm-generic/vmlinux.lds.h
> @@ -773,6 +773,9 @@
>  	. = ALIGN(cacheline);						\
>  	*(.data..percpu)						\
>  	*(.data..percpu..shared_aligned)				\
> +	. = ALIGN(PAGE_SIZE);						\
> +	*(.data..percpu..hv_shared)					\
> +	. = ALIGN(PAGE_SIZE);						\
>  	VMLINUX_SYMBOL(__per_cpu_end) = .;
>  
>  /**
> diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
> index 8f16299..5af366e 100644
> --- a/include/linux/percpu-defs.h
> +++ b/include/linux/percpu-defs.h
> @@ -172,6 +172,15 @@
>  #define DEFINE_PER_CPU_READ_MOSTLY(type, name)				\
>  	DEFINE_PER_CPU_SECTION(type, name, "..read_mostly")
>  
> +/* Declaration/definition used for per-CPU variables that must be shared
> + * between hypervisor and guest OS.
> + */
> +#define DECLARE_PER_CPU_HV_SHARED(type, name)				\
> +	DECLARE_PER_CPU_SECTION(type, name, "..hv_shared")
> +
> +#define DEFINE_PER_CPU_HV_SHARED(type, name)				\
> +	DEFINE_PER_CPU_SECTION(type, name, "..hv_shared")
> +
>  /*
>   * Intermodule exports for per-CPU variables.  sparse forgets about
>   * address space across EXPORT_SYMBOL(), change EXPORT_SYMBOL() to
> 



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux