Hi all,
this series of patches has been based and tested on next-20170125 with
CRYPTO_MANAGER_DISABLED_TESTS not set.
The series adds support to the hmac(shaX) algorithms first, then combines
both the Atmel SHA and AES hardware accelerators to implement
authenc(hmac(shaX),Y(aes)) algorithms as used by IPSEC/SSL connections.
It has also been tested with strongswan + xl2tpd to create an IPSEC+L2TP
(transport mode) VPN and strongswan only (tunnel mode) for an IPSEC VPN.
Then iperf was used to measure the bandwidth improvement in tunnel mode:
drivers AES SHA SPLIP iperf half-duplex
Mbit/s
authenc(hmac(sha1-generic),cbc(aes)) SW SW N/A 27.7
authenc(hmac(sha1-generic),atmel-cbc-aes) HW SW N/A 30.2 (mainline)
authenc(atmel-hmac-sha1,atmel-cbc-aes) HW HW no 29.1
atmel-authenc-hmac-sha1-cbc-aes HW HW yes 38.8
SPLIP: Secure Protocol Layers Improved Performances (AES+SHA combined).
Some patches of this series are purely transitional: I've split the
modifications into many patches to ease the review.
Best regards,
Cyrille
ChangeLog:
v2 -> v3:
- add calls to memzero_explicit(&keys, ...) before exiting from
atmel_aes_authenc_setkey().
- add missing comparison test between req->cryptlen and authsize values
in atmel_aes_authenc_crypt().
- remove the atmel_aes_authenc_copy_assoc() function: I have tested with
a strongswan IPSec ESP Tunnel Mode connection and it still works even if
this driver no longer copies the AAD. FWI, I have also tested with the
crypto/authenc.c driver after having removed the
crypto_authenc_copy_assoc() function and it worked as well. However I
didn't check whether I was in the special case req->src == req->dst.
v1 -> v2:
- add missing drivers/crypto/atmel-authenc.h file in patch 11.
Cyrille Pitchen (12):
crypto: atmel-sha: create function to get an Atmel SHA device
crypto: atmel-sha: update request queue management to make it more
generic
crypto: atmel-sha: make atmel_sha_done_task more generic
crypto: atmel-sha: redefine SHA_FLAGS_SHA* flags to match
SHA_MR_ALGO_SHA*
crypto: atmel-sha: add atmel_sha_wait_for_data_ready()
crypto: atmel-sha: add SHA_MR_MODE_IDATAR0
crypto: atmel-sha: add atmel_sha_cpu_start()
crypto: atmel-sha: add simple DMA transfers
crypto: atmel-sha: add support to hmac(shaX)
crypto: atmel-aes: fix atmel_aes_handle_queue()
crypto: atmel-authenc: add support to authenc(hmac(shaX),Y(aes)) modes
crypto: atmel-sha: add verbose debug facilities to print hw register
names
drivers/crypto/Kconfig | 12 +
drivers/crypto/atmel-aes-regs.h | 16 +
drivers/crypto/atmel-aes.c | 455 ++++++++++++-
drivers/crypto/atmel-authenc.h | 64 ++
drivers/crypto/atmel-sha-regs.h | 20 +
drivers/crypto/atmel-sha.c | 1438 +++++++++++++++++++++++++++++++++++++--
6 files changed, 1937 insertions(+), 68 deletions(-)
create mode 100644 drivers/crypto/atmel-authenc.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
