Hi, Michael & Herbert Because the virtio-crypto device emulation had been in QEMU 2.8, would you please merge the virtio-crypto driver for 4.10 if no other comments? If so, Miachel pls ack and/or review the patch, then Herbert will take it (I asked him last week). Thank you! Ps: Note on 4.10 merge window timing from Linus https://lkml.org/lkml/2016/12/7/506 Dec 23rd is the deadline for 4.10 merge window. Regards, -Gonglei > -----Original Message----- > From: Gonglei (Arei) > Sent: Thursday, December 08, 2016 12:37 PM > Subject: [PATCH v6 2/2] crypto: add virtio-crypto driver > > This patch introduces virtio-crypto driver for Linux Kernel. > > The virtio crypto device is a virtual cryptography device > as well as a kind of virtual hardware accelerator for > virtual machines. The encryption anddecryption requests > are placed in the data queue and are ultimately handled by > thebackend crypto accelerators. The second queue is the > control queue used to create or destroy sessions for > symmetric algorithms and will control some advanced features > in the future. The virtio crypto device provides the following > cryptoservices: CIPHER, MAC, HASH, and AEAD. > > For more information about virtio-crypto device, please see: > http://qemu-project.org/Features/VirtioCrypto > > CC: Michael S. Tsirkin <mst@xxxxxxxxxx> > CC: Cornelia Huck <cornelia.huck@xxxxxxxxxx> > CC: Stefan Hajnoczi <stefanha@xxxxxxxxxx> > CC: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> > CC: Halil Pasic <pasic@xxxxxxxxxxxxxxxxxx> > CC: David S. Miller <davem@xxxxxxxxxxxxx> > CC: Zeng Xin <xin.zeng@xxxxxxxxx> > Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> > --- > MAINTAINERS | 9 + > drivers/crypto/Kconfig | 2 + > drivers/crypto/Makefile | 1 + > drivers/crypto/virtio/Kconfig | 10 + > drivers/crypto/virtio/Makefile | 5 + > drivers/crypto/virtio/virtio_crypto_algs.c | 541 > +++++++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_common.h | 122 ++++++ > drivers/crypto/virtio/virtio_crypto_core.c | 464 > +++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_mgr.c | 264 +++++++++++++ > include/uapi/linux/Kbuild | 1 + > include/uapi/linux/virtio_crypto.h | 450 > ++++++++++++++++++++++ > include/uapi/linux/virtio_ids.h | 1 + > 12 files changed, 1870 insertions(+) > create mode 100644 drivers/crypto/virtio/Kconfig > create mode 100644 drivers/crypto/virtio/Makefile > create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_common.h > create mode 100644 drivers/crypto/virtio/virtio_crypto_core.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_mgr.c > create mode 100644 include/uapi/linux/virtio_crypto.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index ad9b965..cccaaf0 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -12810,6 +12810,7 @@ F: drivers/net/virtio_net.c > F: drivers/block/virtio_blk.c > F: include/linux/virtio_*.h > F: include/uapi/linux/virtio_*.h > +F: drivers/crypto/virtio/ > > VIRTIO DRIVERS FOR S390 > M: Christian Borntraeger <borntraeger@xxxxxxxxxx> > @@ -12846,6 +12847,14 @@ S: Maintained > F: drivers/virtio/virtio_input.c > F: include/uapi/linux/virtio_input.h > > +VIRTIO CRYPTO DRIVER > +M: Gonglei <arei.gonglei@xxxxxxxxxx> > +L: virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx > +L: linux-crypto@xxxxxxxxxxxxxxx > +S: Maintained > +F: drivers/crypto/virtio/ > +F: include/uapi/linux/virtio_crypto.h > + > VIA RHINE NETWORK DRIVER > S: Orphan > F: drivers/net/ethernet/via/via-rhine.c > diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig > index 4d2b81f..7956478 100644 > --- a/drivers/crypto/Kconfig > +++ b/drivers/crypto/Kconfig > @@ -555,4 +555,6 @@ config CRYPTO_DEV_ROCKCHIP > > source "drivers/crypto/chelsio/Kconfig" > > +source "drivers/crypto/virtio/Kconfig" > + > endif # CRYPTO_HW > diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile > index ad7250f..bc53cb8 100644 > --- a/drivers/crypto/Makefile > +++ b/drivers/crypto/Makefile > @@ -32,3 +32,4 @@ obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ > obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ > obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/ > obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/ > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/ > diff --git a/drivers/crypto/virtio/Kconfig b/drivers/crypto/virtio/Kconfig > new file mode 100644 > index 0000000..d80f733 > --- /dev/null > +++ b/drivers/crypto/virtio/Kconfig > @@ -0,0 +1,10 @@ > +config CRYPTO_DEV_VIRTIO > + tristate "VirtIO crypto driver" > + depends on VIRTIO > + select CRYPTO_AEAD > + select CRYPTO_AUTHENC > + select CRYPTO_BLKCIPHER > + default m > + help > + This driver provides support for virtio crypto device. If you > + choose 'M' here, this module will be called virtio_crypto. > diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile > new file mode 100644 > index 0000000..dd342c9 > --- /dev/null > +++ b/drivers/crypto/virtio/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio_crypto.o > +virtio_crypto-objs := \ > + virtio_crypto_algs.o \ > + virtio_crypto_mgr.o \ > + virtio_crypto_core.o > diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c > b/drivers/crypto/virtio/virtio_crypto_algs.c > new file mode 100644 > index 0000000..7130dc9 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_algs.c > @@ -0,0 +1,541 @@ > + /* Algorithms supported by virtio crypto device > + * > + * Authors: Gonglei <arei.gonglei@xxxxxxxxxx> > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/scatterlist.h> > +#include <crypto/algapi.h> > +#include <linux/err.h> > +#include <crypto/scatterwalk.h> > +#include <linux/atomic.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > +/* > + * The algs_lock protects the below global virtio_crypto_active_devs > + * and crypto algorithms registion. > + */ > +static DEFINE_MUTEX(algs_lock); > +static unsigned int virtio_crypto_active_devs; > + > +static u64 virtio_crypto_alg_sg_nents_length(struct scatterlist *sg) > +{ > + u64 total = 0; > + > + for (total = 0; sg; sg = sg_next(sg)) > + total += sg->length; > + > + return total; > +} > + > +static int > +virtio_crypto_alg_validate_key(int key_len, uint32_t *alg) > +{ > + switch (key_len) { > + case AES_KEYSIZE_128: > + case AES_KEYSIZE_192: > + case AES_KEYSIZE_256: > + *alg = VIRTIO_CRYPTO_CIPHER_AES_CBC; > + break; > + default: > + pr_err("virtio_crypto: Unsupported key length: %d\n", > + key_len); > + return -EINVAL; > + } > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_init_session( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + uint32_t alg, const uint8_t *key, > + unsigned int keylen, > + int encrypt) > +{ > + struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; > + unsigned int tmp; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : > VIRTIO_CRYPTO_OP_DECRYPT; > + int err; > + unsigned int num_out = 0, num_in = 0; > + > + /* > + * Avoid to do DMA from the stack, switch to using > + * dynamically-allocated for the key > + */ > + uint8_t *cipher_key = kmalloc(keylen, GFP_ATOMIC); > + > + if (!cipher_key) > + return -ENOMEM; > + > + memcpy(cipher_key, key, keylen); > + > + spin_lock(&vcrypto->ctrl_lock); > + /* Pad ctrl header */ > + vcrypto->ctrl.header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); > + vcrypto->ctrl.header.algo = cpu_to_le32(alg); > + /* Set the default dataqueue id to 0 */ > + vcrypto->ctrl.header.queue_id = 0; > + > + vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > + /* Pad cipher's parameters */ > + vcrypto->ctrl.u.sym_create_session.op_type = > + cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = > + vcrypto->ctrl.header.algo; > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = > + cpu_to_le32(keylen); > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = > + cpu_to_le32(op); > + > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sgs[num_out++] = &outhdr; > + > + /* Set key */ > + sg_init_one(&key_sg, cipher_key, keylen); > + sgs[num_out++] = &key_sg; > + > + /* Return status and session id back */ > + sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); > + sgs[num_out + num_in++] = &inhdr; > + > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > + num_in, vcrypto, GFP_ATOMIC); > + if (err < 0) { > + spin_unlock(&vcrypto->ctrl_lock); > + kzfree(cipher_key); > + return err; > + } > + virtqueue_kick(vcrypto->ctrl_vq); > + > + /* > + * Trapping into the hypervisor, so the request should be > + * handled immediately. > + */ > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > + cpu_relax(); > + > + if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { > + spin_unlock(&vcrypto->ctrl_lock); > + pr_err("virtio_crypto: Create session failed status: %u\n", > + le32_to_cpu(vcrypto->input.status)); > + kzfree(cipher_key); > + return -EINVAL; > + } > + > + if (encrypt) > + ctx->enc_sess_info.session_id = > + le64_to_cpu(vcrypto->input.session_id); > + else > + ctx->dec_sess_info.session_id = > + le64_to_cpu(vcrypto->input.session_id); > + > + spin_unlock(&vcrypto->ctrl_lock); > + > + kzfree(cipher_key); > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_close_session( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + int encrypt) > +{ > + struct scatterlist outhdr, status_sg, *sgs[2]; > + unsigned int tmp; > + struct virtio_crypto_destroy_session_req *destroy_session; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int err; > + unsigned int num_out = 0, num_in = 0; > + > + spin_lock(&vcrypto->ctrl_lock); > + vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; > + /* Pad ctrl header */ > + vcrypto->ctrl.header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); > + /* Set the default virtqueue id to 0 */ > + vcrypto->ctrl.header.queue_id = 0; > + > + destroy_session = &vcrypto->ctrl.u.destroy_session; > + > + if (encrypt) > + destroy_session->session_id = > + cpu_to_le64(ctx->enc_sess_info.session_id); > + else > + destroy_session->session_id = > + cpu_to_le64(ctx->dec_sess_info.session_id); > + > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sgs[num_out++] = &outhdr; > + > + /* Return status and session id back */ > + sg_init_one(&status_sg, &vcrypto->ctrl_status.status, > + sizeof(vcrypto->ctrl_status.status)); > + sgs[num_out + num_in++] = &status_sg; > + > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > + num_in, vcrypto, GFP_ATOMIC); > + if (err < 0) { > + spin_unlock(&vcrypto->ctrl_lock); > + return err; > + } > + virtqueue_kick(vcrypto->ctrl_vq); > + > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > + cpu_relax(); > + > + if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { > + spin_unlock(&vcrypto->ctrl_lock); > + pr_err("virtio_crypto: Close session failed status: %u, session_id: > 0x%llx\n", > + vcrypto->ctrl_status.status, > + destroy_session->session_id); > + > + return -EINVAL; > + } > + spin_unlock(&vcrypto->ctrl_lock); > + > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_init_sessions( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + const uint8_t *key, unsigned int keylen) > +{ > + uint32_t alg; > + int ret; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + > + if (keylen > vcrypto->max_cipher_key_len) { > + pr_err("virtio_crypto: the key is too long\n"); > + goto bad_key; > + } > + > + if (virtio_crypto_alg_validate_key(keylen, &alg)) > + goto bad_key; > + > + /* Create encryption session */ > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > + alg, key, keylen, 1); > + if (ret) > + return ret; > + /* Create decryption session */ > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > + alg, key, keylen, 0); > + if (ret) { > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > + return ret; > + } > + return 0; > + > +bad_key: > + crypto_tfm_set_flags(ctx->tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); > + return -EINVAL; > +} > + > +/* Note: kernel crypto API realization */ > +static int virtio_crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm, > + const uint8_t *key, > + unsigned int keylen) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(tfm); > + int ret; > + > + if (!ctx->vcrypto) { > + /* New key */ > + int node = virtio_crypto_get_current_node(); > + struct virtio_crypto *vcrypto = > + virtcrypto_get_dev_node(node); > + if (!vcrypto) { > + pr_err("virtio_crypto: Could not find a virtio device in the > system"); > + return -ENODEV; > + } > + > + ctx->vcrypto = vcrypto; > + } else { > + /* Rekeying, we should close the created sessions previously */ > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > + virtio_crypto_alg_ablkcipher_close_session(ctx, 0); > + } > + > + ret = virtio_crypto_alg_ablkcipher_init_sessions(ctx, key, keylen); > + if (ret) { > + virtcrypto_dev_put(ctx->vcrypto); > + ctx->vcrypto = NULL; > + > + return ret; > + } > + > + return 0; > +} > + > +static int > +__virtio_crypto_ablkcipher_do_req(struct virtio_crypto_request *vc_req, > + struct ablkcipher_request *req, > + struct data_queue *data_vq, > + __u8 op) > +{ > + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); > + unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); > + struct virtio_crypto_ablkcipher_ctx *ctx = vc_req->ablkcipher_ctx; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + struct virtio_crypto_op_data_req *req_data; > + int src_nents, dst_nents; > + int err; > + unsigned long flags; > + struct scatterlist outhdr, iv_sg, status_sg, **sgs; > + int i; > + u64 dst_len; > + unsigned int num_out = 0, num_in = 0; > + int sg_total; > + uint8_t *iv; > + > + src_nents = sg_nents_for_len(req->src, req->nbytes); > + dst_nents = sg_nents(req->dst); > + > + pr_debug("virtio_crypto: Number of sgs (src_nents: %d, > dst_nents: %d)\n", > + src_nents, dst_nents); > + > + /* Why 3? outhdr + iv + inhdr */ > + sg_total = src_nents + dst_nents + 3; > + sgs = kzalloc_node(sg_total * sizeof(*sgs), GFP_ATOMIC, > + dev_to_node(&vcrypto->vdev->dev)); > + if (!sgs) > + return -ENOMEM; > + > + req_data = kzalloc_node(sizeof(*req_data), GFP_ATOMIC, > + dev_to_node(&vcrypto->vdev->dev)); > + if (!req_data) { > + kfree(sgs); > + return -ENOMEM; > + } > + > + vc_req->req_data = req_data; > + vc_req->type = VIRTIO_CRYPTO_SYM_OP_CIPHER; > + /* Head of operation */ > + if (op) { > + req_data->header.session_id = > + cpu_to_le64(ctx->enc_sess_info.session_id); > + req_data->header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_ENCRYPT); > + } else { > + req_data->header.session_id = > + cpu_to_le64(ctx->dec_sess_info.session_id); > + req_data->header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DECRYPT); > + } > + req_data->u.sym_req.op_type = > cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > + req_data->u.sym_req.u.cipher.para.iv_len = cpu_to_le32(ivsize); > + req_data->u.sym_req.u.cipher.para.src_data_len = > + cpu_to_le32(req->nbytes); > + > + dst_len = virtio_crypto_alg_sg_nents_length(req->dst); > + if (unlikely(dst_len > U32_MAX)) { > + pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n"); > + err = -EINVAL; > + goto free; > + } > + > + pr_debug("virtio_crypto: src_len: %u, dst_len: %llu\n", > + req->nbytes, dst_len); > + > + if (unlikely(req->nbytes + dst_len + ivsize + > + sizeof(vc_req->status) > vcrypto->max_size)) { > + pr_err("virtio_crypto: The length is too big\n"); > + err = -EINVAL; > + goto free; > + } > + > + req_data->u.sym_req.u.cipher.para.dst_data_len = > + cpu_to_le32((uint32_t)dst_len); > + > + /* Outhdr */ > + sg_init_one(&outhdr, req_data, sizeof(*req_data)); > + sgs[num_out++] = &outhdr; > + > + /* IV */ > + > + /* > + * Avoid to do DMA from the stack, switch to using > + * dynamically-allocated for the IV > + */ > + iv = kzalloc_node(ivsize, GFP_ATOMIC, > + dev_to_node(&vcrypto->vdev->dev)); > + if (!iv) { > + err = -ENOMEM; > + goto free; > + } > + memcpy(iv, req->info, ivsize); > + sg_init_one(&iv_sg, iv, ivsize); > + sgs[num_out++] = &iv_sg; > + vc_req->iv = iv; > + > + /* Source data */ > + for (i = 0; i < src_nents; i++) > + sgs[num_out++] = &req->src[i]; > + > + /* Destination data */ > + for (i = 0; i < dst_nents; i++) > + sgs[num_out + num_in++] = &req->dst[i]; > + > + /* Status */ > + sg_init_one(&status_sg, &vc_req->status, sizeof(vc_req->status)); > + sgs[num_out + num_in++] = &status_sg; > + > + vc_req->sgs = sgs; > + > + spin_lock_irqsave(&vcrypto->lock, flags); > + err = virtqueue_add_sgs(data_vq->vq, sgs, num_out, > + num_in, vc_req, GFP_ATOMIC); > + spin_unlock_irqrestore(&vcrypto->lock, flags); > + if (unlikely(err < 0)) > + goto free_iv; > + > + return 0; > + > +free_iv: > + kzfree(iv); > +free: > + kzfree(req_data); > + kfree(sgs); > + return err; > +} > + > +static int virtio_crypto_ablkcipher_encrypt(struct ablkcipher_request *req) > +{ > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int ret; > + /* Use the first data virtqueue as default */ > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > + > + vc_req->ablkcipher_ctx = ctx; > + vc_req->ablkcipher_req = req; > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 1); > + if (ret < 0) { > + pr_err("virtio_crypto: Encryption failed!\n"); > + return ret; > + } > + virtqueue_kick(data_vq->vq); > + > + return -EINPROGRESS; > +} > + > +static int virtio_crypto_ablkcipher_decrypt(struct ablkcipher_request *req) > +{ > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int ret; > + /* Use the first data virtqueue as default */ > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > + > + vc_req->ablkcipher_ctx = ctx; > + vc_req->ablkcipher_req = req; > + > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 0); > + if (ret < 0) { > + pr_err("virtio_crypto: Decryption failed!\n"); > + return ret; > + } > + virtqueue_kick(data_vq->vq); > + > + return -EINPROGRESS; > +} > + > +static int virtio_crypto_ablkcipher_init(struct crypto_tfm *tfm) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > + > + tfm->crt_ablkcipher.reqsize = sizeof(struct virtio_crypto_request); > + ctx->tfm = tfm; > + > + return 0; > +} > + > +static void virtio_crypto_ablkcipher_exit(struct crypto_tfm *tfm) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > + > + if (!ctx->vcrypto) > + return; > + > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > + virtio_crypto_alg_ablkcipher_close_session(ctx, 0); > + virtcrypto_dev_put(ctx->vcrypto); > + ctx->vcrypto = NULL; > +} > + > +static struct crypto_alg virtio_crypto_algs[] = { { > + .cra_name = "cbc(aes)", > + .cra_driver_name = "virtio_crypto_aes_cbc", > + .cra_priority = 501, > + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, > + .cra_blocksize = AES_BLOCK_SIZE, > + .cra_ctxsize = sizeof(struct virtio_crypto_ablkcipher_ctx), > + .cra_alignmask = 0, > + .cra_module = THIS_MODULE, > + .cra_type = &crypto_ablkcipher_type, > + .cra_init = virtio_crypto_ablkcipher_init, > + .cra_exit = virtio_crypto_ablkcipher_exit, > + .cra_u = { > + .ablkcipher = { > + .setkey = virtio_crypto_ablkcipher_setkey, > + .decrypt = virtio_crypto_ablkcipher_decrypt, > + .encrypt = virtio_crypto_ablkcipher_encrypt, > + .min_keysize = AES_MIN_KEY_SIZE, > + .max_keysize = AES_MAX_KEY_SIZE, > + .ivsize = AES_BLOCK_SIZE, > + }, > + }, > +} }; > + > +int virtio_crypto_algs_register(void) > +{ > + int ret = 0; > + > + mutex_lock(&algs_lock); > + if (++virtio_crypto_active_devs != 1) > + goto unlock; > + > + ret = crypto_register_algs(virtio_crypto_algs, > + ARRAY_SIZE(virtio_crypto_algs)); > + if (ret) > + virtio_crypto_active_devs--; > + > +unlock: > + mutex_unlock(&algs_lock); > + return ret; > +} > + > +void virtio_crypto_algs_unregister(void) > +{ > + mutex_lock(&algs_lock); > + if (--virtio_crypto_active_devs != 0) > + goto unlock; > + > + crypto_unregister_algs(virtio_crypto_algs, > + ARRAY_SIZE(virtio_crypto_algs)); > + > +unlock: > + mutex_unlock(&algs_lock); > +} > diff --git a/drivers/crypto/virtio/virtio_crypto_common.h > b/drivers/crypto/virtio/virtio_crypto_common.h > new file mode 100644 > index 0000000..975404b > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_common.h > @@ -0,0 +1,122 @@ > +/* Common header for Virtio crypto device. > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef _VIRTIO_CRYPTO_COMMON_H > +#define _VIRTIO_CRYPTO_COMMON_H > + > +#include <linux/virtio.h> > +#include <linux/crypto.h> > +#include <linux/spinlock.h> > +#include <crypto/aead.h> > +#include <crypto/aes.h> > +#include <crypto/authenc.h> > + > + > +/* Internal representation of a data virtqueue */ > +struct data_queue { > + /* Virtqueue associated with this send _queue */ > + struct virtqueue *vq; > + > + /* Name of the tx queue: dataq.$index */ > + char name[32]; > +}; > + > +struct virtio_crypto { > + struct virtio_device *vdev; > + struct virtqueue *ctrl_vq; > + struct data_queue *data_vq; > + > + /* To protect the vq operations for the dataq */ > + spinlock_t lock; > + > + /* To protect the vq operations for the controlq */ > + spinlock_t ctrl_lock; > + > + /* Maximum of data queues supported by the device */ > + u32 max_data_queues; > + > + /* Number of queue currently used by the driver */ > + u32 curr_queue; > + > + /* Maximum length of cipher key */ > + u32 max_cipher_key_len; > + /* Maximum length of authenticated key */ > + u32 max_auth_key_len; > + /* Maximum size of per request */ > + u64 max_size; > + > + /* Control VQ buffers: protected by the ctrl_lock */ > + struct virtio_crypto_op_ctrl_req ctrl; > + struct virtio_crypto_session_input input; > + struct virtio_crypto_inhdr ctrl_status; > + > + unsigned long status; > + atomic_t ref_count; > + struct list_head list; > + struct module *owner; > + uint8_t dev_id; > + > + /* Does the affinity hint is set for virtqueues? */ > + bool affinity_hint_set; > +}; > + > +struct virtio_crypto_sym_session_info { > + /* Backend session id, which come from the host side */ > + __u64 session_id; > +}; > + > +struct virtio_crypto_ablkcipher_ctx { > + struct virtio_crypto *vcrypto; > + struct crypto_tfm *tfm; > + > + struct virtio_crypto_sym_session_info enc_sess_info; > + struct virtio_crypto_sym_session_info dec_sess_info; > +}; > + > +struct virtio_crypto_request { > + /* Cipher or aead */ > + uint32_t type; > + uint8_t status; > + struct virtio_crypto_ablkcipher_ctx *ablkcipher_ctx; > + struct ablkcipher_request *ablkcipher_req; > + struct virtio_crypto_op_data_req *req_data; > + struct scatterlist **sgs; > + uint8_t *iv; > +}; > + > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev); > +struct list_head *virtcrypto_devmgr_get_head(void); > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev); > +struct virtio_crypto *virtcrypto_devmgr_get_first(void); > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev); > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev); > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev); > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev); > +struct virtio_crypto *virtcrypto_get_dev_node(int node); > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto); > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto); > + > +static inline int virtio_crypto_get_current_node(void) > +{ > + return topology_physical_package_id(smp_processor_id()); > +} > + > +int virtio_crypto_algs_register(void); > +void virtio_crypto_algs_unregister(void); > + > +#endif /* _VIRTIO_CRYPTO_COMMON_H */ > diff --git a/drivers/crypto/virtio/virtio_crypto_core.c > b/drivers/crypto/virtio/virtio_crypto_core.c > new file mode 100644 > index 0000000..286d829 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_core.c > @@ -0,0 +1,464 @@ > + /* Driver for Virtio crypto device. > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/virtio_config.h> > +#include <linux/cpu.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > + > +static void virtcrypto_dataq_callback(struct virtqueue *vq) > +{ > + struct virtio_crypto *vcrypto = vq->vdev->priv; > + struct virtio_crypto_request *vc_req; > + unsigned long flags; > + unsigned int len; > + struct ablkcipher_request *ablk_req; > + int error; > + > + spin_lock_irqsave(&vcrypto->lock, flags); > + do { > + virtqueue_disable_cb(vq); > + while ((vc_req = virtqueue_get_buf(vq, &len)) != NULL) { > + if (vc_req->type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { > + switch (vc_req->status) { > + case VIRTIO_CRYPTO_OK: > + error = 0; > + break; > + case VIRTIO_CRYPTO_INVSESS: > + case VIRTIO_CRYPTO_ERR: > + error = -EINVAL; > + break; > + case VIRTIO_CRYPTO_BADMSG: > + error = -EBADMSG; > + break; > + default: > + error = -EIO; > + break; > + } > + ablk_req = vc_req->ablkcipher_req; > + /* Finish the encrypt or decrypt process */ > + ablk_req->base.complete(&ablk_req->base, error); > + } > + > + kzfree(vc_req->iv); > + kzfree(vc_req->req_data); > + kfree(vc_req->sgs); > + } > + } while (!virtqueue_enable_cb(vq)); > + spin_unlock_irqrestore(&vcrypto->lock, flags); > +} > + > +static int virtcrypto_find_vqs(struct virtio_crypto *vi) > +{ > + vq_callback_t **callbacks; > + struct virtqueue **vqs; > + int ret = -ENOMEM; > + int i, total_vqs; > + const char **names; > + > + /* > + * We expect 1 data virtqueue, followed by > + * possible N-1 data queues used in multiqueue mode, > + * followed by control vq. > + */ > + total_vqs = vi->max_data_queues + 1; > + > + /* Allocate space for find_vqs parameters */ > + vqs = kcalloc(total_vqs, sizeof(*vqs), GFP_KERNEL); > + if (!vqs) > + goto err_vq; > + callbacks = kcalloc(total_vqs, sizeof(*callbacks), GFP_KERNEL); > + if (!callbacks) > + goto err_callback; > + names = kcalloc(total_vqs, sizeof(*names), GFP_KERNEL); > + if (!names) > + goto err_names; > + > + /* Parameters for control virtqueue */ > + callbacks[total_vqs - 1] = NULL; > + names[total_vqs - 1] = "controlq"; > + > + /* Allocate/initialize parameters for data virtqueues */ > + for (i = 0; i < vi->max_data_queues; i++) { > + callbacks[i] = virtcrypto_dataq_callback; > + snprintf(vi->data_vq[i].name, sizeof(vi->data_vq[i].name), > + "dataq.%d", i); > + names[i] = vi->data_vq[i].name; > + } > + > + ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks, > + names); > + if (ret) > + goto err_find; > + > + vi->ctrl_vq = vqs[total_vqs - 1]; > + > + for (i = 0; i < vi->max_data_queues; i++) > + vi->data_vq[i].vq = vqs[i]; > + > + kfree(names); > + kfree(callbacks); > + kfree(vqs); > + > + return 0; > + > +err_find: > + kfree(names); > +err_names: > + kfree(callbacks); > +err_callback: > + kfree(vqs); > +err_vq: > + return ret; > +} > + > +static int virtcrypto_alloc_queues(struct virtio_crypto *vi) > +{ > + vi->data_vq = kcalloc(vi->max_data_queues, sizeof(*vi->data_vq), > + GFP_KERNEL); > + if (!vi->data_vq) > + return -ENOMEM; > + > + return 0; > +} > + > +static void virtcrypto_clean_affinity(struct virtio_crypto *vi, long hcpu) > +{ > + int i; > + > + if (vi->affinity_hint_set) { > + for (i = 0; i < vi->max_data_queues; i++) > + virtqueue_set_affinity(vi->data_vq[i].vq, -1); > + > + vi->affinity_hint_set = false; > + } > +} > + > +static void virtcrypto_set_affinity(struct virtio_crypto *vcrypto) > +{ > + int i = 0; > + int cpu; > + > + /* > + * In single queue mode, we don't set the cpu affinity. > + */ > + if (vcrypto->curr_queue == 1 || vcrypto->max_data_queues == 1) { > + virtcrypto_clean_affinity(vcrypto, -1); > + return; > + } > + > + /* > + * In multiqueue mode, we let the queue to be private to one cpu > + * by setting the affinity hint to eliminate the contention. > + * > + * TODO: adds cpu hotplug support by register cpu notifier. > + * > + */ > + for_each_online_cpu(cpu) { > + virtqueue_set_affinity(vcrypto->data_vq[i].vq, cpu); > + if (++i >= vcrypto->max_data_queues) > + break; > + } > + > + vcrypto->affinity_hint_set = true; > +} > + > +static void virtcrypto_free_queues(struct virtio_crypto *vi) > +{ > + kfree(vi->data_vq); > +} > + > +static int virtcrypto_init_vqs(struct virtio_crypto *vi) > +{ > + int ret; > + > + /* Allocate send & receive queues */ > + ret = virtcrypto_alloc_queues(vi); > + if (ret) > + goto err; > + > + ret = virtcrypto_find_vqs(vi); > + if (ret) > + goto err_free; > + > + get_online_cpus(); > + virtcrypto_set_affinity(vi); > + put_online_cpus(); > + > + return 0; > + > +err_free: > + virtcrypto_free_queues(vi); > +err: > + return ret; > +} > + > +static int virtcrypto_update_status(struct virtio_crypto *vcrypto) > +{ > + u32 status; > + int err; > + unsigned long flags; > + > + virtio_cread(vcrypto->vdev, > + struct virtio_crypto_config, status, &status); > + > + /* > + * Unknown status bits would be a host error and the driver > + * should consider the device to be broken. > + */ > + if (status & (~VIRTIO_CRYPTO_S_HW_READY)) { > + dev_warn(&vcrypto->vdev->dev, > + "Unknown status bits: 0x%x\n", status); > + > + spin_lock_irqsave(&vcrypto->lock, flags); > + virtio_break_device(vcrypto->vdev); > + spin_unlock_irqrestore(&vcrypto->lock, flags); > + return -EPERM; > + } > + > + if (vcrypto->status == status) > + return 0; > + > + vcrypto->status = status; > + > + if (vcrypto->status & VIRTIO_CRYPTO_S_HW_READY) { > + err = virtcrypto_dev_start(vcrypto); > + if (err) { > + dev_err(&vcrypto->vdev->dev, > + "Failed to start virtio crypto device.\n"); > + > + return -EPERM; > + } > + dev_info(&vcrypto->vdev->dev, "Accelerator is ready\n"); > + } else { > + virtcrypto_dev_stop(vcrypto); > + dev_info(&vcrypto->vdev->dev, "Accelerator is not ready\n"); > + } > + > + return 0; > +} > + > +static void virtcrypto_del_vqs(struct virtio_crypto *vcrypto) > +{ > + struct virtio_device *vdev = vcrypto->vdev; > + > + virtcrypto_clean_affinity(vcrypto, -1); > + > + vdev->config->del_vqs(vdev); > + > + virtcrypto_free_queues(vcrypto); > +} > + > +static int virtcrypto_probe(struct virtio_device *vdev) > +{ > + int err = -EFAULT; > + struct virtio_crypto *vcrypto; > + u32 max_data_queues = 0, max_cipher_key_len = 0; > + u32 max_auth_key_len = 0; > + u64 max_size = 0; > + > + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) > + return -ENODEV; > + > + if (!vdev->config->get) { > + dev_err(&vdev->dev, "%s failure: config access disabled\n", > + __func__); > + return -EINVAL; > + } > + > + if (num_possible_nodes() > 1 && dev_to_node(&vdev->dev) < 0) { > + /* > + * If the accelerator is connected to a node with no memory > + * there is no point in using the accelerator since the remote > + * memory transaction will be very slow. > + */ > + dev_err(&vdev->dev, "Invalid NUMA configuration.\n"); > + return -EINVAL; > + } > + > + vcrypto = kzalloc_node(sizeof(*vcrypto), GFP_KERNEL, > + dev_to_node(&vdev->dev)); > + if (!vcrypto) > + return -ENOMEM; > + > + virtio_cread(vdev, struct virtio_crypto_config, > + max_dataqueues, &max_data_queues); > + if (max_data_queues < 1) > + max_data_queues = 1; > + > + virtio_cread(vdev, struct virtio_crypto_config, > + max_cipher_key_len, &max_cipher_key_len); > + virtio_cread(vdev, struct virtio_crypto_config, > + max_auth_key_len, &max_auth_key_len); > + virtio_cread(vdev, struct virtio_crypto_config, > + max_size, &max_size); > + > + /* Add virtio crypto device to global table */ > + err = virtcrypto_devmgr_add_dev(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to add new virtio crypto device.\n"); > + goto free; > + } > + vcrypto->owner = THIS_MODULE; > + vcrypto = vdev->priv = vcrypto; > + vcrypto->vdev = vdev; > + spin_lock_init(&vcrypto->lock); > + spin_lock_init(&vcrypto->ctrl_lock); > + > + /* Use single data queue as default */ > + vcrypto->curr_queue = 1; > + vcrypto->max_data_queues = max_data_queues; > + vcrypto->max_cipher_key_len = max_cipher_key_len; > + vcrypto->max_auth_key_len = max_auth_key_len; > + vcrypto->max_size = max_size; > + > + dev_info(&vdev->dev, > + "max_queues: %u, max_cipher_key_len: %u, max_auth_key_len: %u, > max_size 0x%llx\n", > + vcrypto->max_data_queues, > + vcrypto->max_cipher_key_len, > + vcrypto->max_auth_key_len, > + vcrypto->max_size); > + > + err = virtcrypto_init_vqs(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to initialize vqs.\n"); > + goto free_dev; > + } > + virtio_device_ready(vdev); > + > + err = virtcrypto_update_status(vcrypto); > + if (err) > + goto free_vqs; > + > + return 0; > + > +free_vqs: > + vcrypto->vdev->config->reset(vdev); > + virtcrypto_del_vqs(vcrypto); > +free_dev: > + virtcrypto_devmgr_rm_dev(vcrypto); > +free: > + kfree(vcrypto); > + return err; > +} > + > +static void virtcrypto_free_unused_reqs(struct virtio_crypto *vcrypto) > +{ > + struct virtio_crypto_request *vc_req; > + int i; > + struct virtqueue *vq; > + > + for (i = 0; i < vcrypto->max_data_queues; i++) { > + vq = vcrypto->data_vq[i].vq; > + while ((vc_req = virtqueue_detach_unused_buf(vq)) != NULL) { > + kfree(vc_req->req_data); > + kfree(vc_req->sgs); > + } > + } > +} > + > +static void virtcrypto_remove(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + > + dev_info(&vdev->dev, "Start virtcrypto_remove.\n"); > + > + if (virtcrypto_dev_started(vcrypto)) > + virtcrypto_dev_stop(vcrypto); > + vdev->config->reset(vdev); > + virtcrypto_free_unused_reqs(vcrypto); > + virtcrypto_del_vqs(vcrypto); > + virtcrypto_devmgr_rm_dev(vcrypto); > + kfree(vcrypto); > +} > + > +static void virtcrypto_config_changed(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + > + virtcrypto_update_status(vcrypto); > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int virtcrypto_freeze(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + > + vdev->config->reset(vdev); > + virtcrypto_free_unused_reqs(vcrypto); > + if (virtcrypto_dev_started(vcrypto)) > + virtcrypto_dev_stop(vcrypto); > + > + virtcrypto_del_vqs(vcrypto); > + return 0; > +} > + > +static int virtcrypto_restore(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + int err; > + > + err = virtcrypto_init_vqs(vcrypto); > + if (err) > + return err; > + > + virtio_device_ready(vdev); > + err = virtcrypto_dev_start(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to start virtio crypto device.\n"); > + return -EFAULT; > + } > + > + return 0; > +} > +#endif > + > +static unsigned int features[] = { > + /* none */ > +}; > + > +static struct virtio_device_id id_table[] = { > + { VIRTIO_ID_CRYPTO, VIRTIO_DEV_ANY_ID }, > + { 0 }, > +}; > + > +static struct virtio_driver virtio_crypto_driver = { > + .driver.name = KBUILD_MODNAME, > + .driver.owner = THIS_MODULE, > + .feature_table = features, > + .feature_table_size = ARRAY_SIZE(features), > + .id_table = id_table, > + .probe = virtcrypto_probe, > + .remove = virtcrypto_remove, > + .config_changed = virtcrypto_config_changed, > +#ifdef CONFIG_PM_SLEEP > + .freeze = virtcrypto_freeze, > + .restore = virtcrypto_restore, > +#endif > +}; > + > +module_virtio_driver(virtio_crypto_driver); > + > +MODULE_DEVICE_TABLE(virtio, id_table); > +MODULE_DESCRIPTION("virtio crypto device driver"); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Gonglei <arei.gonglei@xxxxxxxxxx>"); > diff --git a/drivers/crypto/virtio/virtio_crypto_mgr.c > b/drivers/crypto/virtio/virtio_crypto_mgr.c > new file mode 100644 > index 0000000..a69ff71 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_mgr.c > @@ -0,0 +1,264 @@ > + /* Management for virtio crypto devices (refer to adf_dev_mgr.c) > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/mutex.h> > +#include <linux/list.h> > +#include <linux/module.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > +static LIST_HEAD(virtio_crypto_table); > +static uint32_t num_devices; > + > +/* The table_lock protects the above global list and num_devices */ > +static DEFINE_MUTEX(table_lock); > + > +#define VIRTIO_CRYPTO_MAX_DEVICES 32 > + > + > +/* > + * virtcrypto_devmgr_add_dev() - Add vcrypto_dev to the acceleration > + * framework. > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Function adds virtio crypto device to the global list. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 on success, error code othewise. > + */ > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev) > +{ > + struct list_head *itr; > + > + mutex_lock(&table_lock); > + if (num_devices == VIRTIO_CRYPTO_MAX_DEVICES) { > + pr_info("virtio_crypto: only support up to %d devices\n", > + VIRTIO_CRYPTO_MAX_DEVICES); > + mutex_unlock(&table_lock); > + return -EFAULT; > + } > + > + list_for_each(itr, &virtio_crypto_table) { > + struct virtio_crypto *ptr = > + list_entry(itr, struct virtio_crypto, list); > + > + if (ptr == vcrypto_dev) { > + mutex_unlock(&table_lock); > + return -EEXIST; > + } > + } > + atomic_set(&vcrypto_dev->ref_count, 0); > + list_add_tail(&vcrypto_dev->list, &virtio_crypto_table); > + vcrypto_dev->dev_id = num_devices++; > + mutex_unlock(&table_lock); > + return 0; > +} > + > +struct list_head *virtcrypto_devmgr_get_head(void) > +{ > + return &virtio_crypto_table; > +} > + > +/* > + * virtcrypto_devmgr_rm_dev() - Remove vcrypto_dev from the acceleration > + * framework. > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Function removes virtio crypto device from the acceleration framework. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev) > +{ > + mutex_lock(&table_lock); > + list_del(&vcrypto_dev->list); > + num_devices--; > + mutex_unlock(&table_lock); > +} > + > +/* > + * virtcrypto_devmgr_get_first() > + * > + * Function returns the first virtio crypto device from the acceleration > + * framework. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: pointer to vcrypto_dev or NULL if not found. > + */ > +struct virtio_crypto *virtcrypto_devmgr_get_first(void) > +{ > + struct virtio_crypto *dev = NULL; > + > + mutex_lock(&table_lock); > + if (!list_empty(&virtio_crypto_table)) > + dev = list_first_entry(&virtio_crypto_table, > + struct virtio_crypto, > + list); > + mutex_unlock(&table_lock); > + return dev; > +} > + > +/* > + * virtcrypto_dev_in_use() - Check whether vcrypto_dev is currently in use > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 1 when device is in use, 0 otherwise. > + */ > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev) > +{ > + return atomic_read(&vcrypto_dev->ref_count) != 0; > +} > + > +/* > + * virtcrypto_dev_get() - Increment vcrypto_dev reference count > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Increment the vcrypto_dev refcount and if this is the first time > + * incrementing it during this period the vcrypto_dev is in use, > + * increment the module refcount too. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 when successful, EFAULT when fail to bump module refcount > + */ > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev) > +{ > + if (atomic_add_return(1, &vcrypto_dev->ref_count) == 1) > + if (!try_module_get(vcrypto_dev->owner)) > + return -EFAULT; > + return 0; > +} > + > +/* > + * virtcrypto_dev_put() - Decrement vcrypto_dev reference count > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Decrement the vcrypto_dev refcount and if this is the last time > + * decrementing it during this period the vcrypto_dev is in use, > + * decrement the module refcount too. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev) > +{ > + if (atomic_sub_return(1, &vcrypto_dev->ref_count) == 0) > + module_put(vcrypto_dev->owner); > +} > + > +/* > + * virtcrypto_dev_started() - Check whether device has started > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 1 when the device has started, 0 otherwise > + */ > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev) > +{ > + return (vcrypto_dev->status & VIRTIO_CRYPTO_S_HW_READY); > +} > + > +/* > + * virtcrypto_get_dev_node() - Get vcrypto_dev on the node. > + * @node: Node id the driver works. > + * > + * Function returns the virtio crypto device used fewest on the node. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: pointer to vcrypto_dev or NULL if not found. > + */ > +struct virtio_crypto *virtcrypto_get_dev_node(int node) > +{ > + struct virtio_crypto *vcrypto_dev = NULL, *tmp_dev; > + unsigned long best = ~0; > + unsigned long ctr; > + > + mutex_lock(&table_lock); > + list_for_each_entry(tmp_dev, virtcrypto_devmgr_get_head(), list) { > + > + if ((node == dev_to_node(&tmp_dev->vdev->dev) || > + dev_to_node(&tmp_dev->vdev->dev) < 0) && > + virtcrypto_dev_started(tmp_dev)) { > + ctr = atomic_read(&tmp_dev->ref_count); > + if (best > ctr) { > + vcrypto_dev = tmp_dev; > + best = ctr; > + } > + } > + } > + > + if (!vcrypto_dev) { > + pr_info("virtio_crypto: Could not find a device on node %d\n", > + node); > + /* Get any started device */ > + list_for_each_entry(tmp_dev, > + virtcrypto_devmgr_get_head(), list) { > + if (virtcrypto_dev_started(tmp_dev)) { > + vcrypto_dev = tmp_dev; > + break; > + } > + } > + } > + mutex_unlock(&table_lock); > + if (!vcrypto_dev) > + return NULL; > + > + virtcrypto_dev_get(vcrypto_dev); > + return vcrypto_dev; > +} > + > +/* > + * virtcrypto_dev_start() - Start virtio crypto device > + * @vcrypto: Pointer to virtio crypto device. > + * > + * Function notifies all the registered services that the virtio crypto device > + * is ready to be used. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 on success, EFAULT when fail to register algorithms > + */ > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto) > +{ > + if (virtio_crypto_algs_register()) { > + pr_err("virtio_crypto: Failed to register crypto algs\n"); > + return -EFAULT; > + } > + > + return 0; > +} > + > +/* > + * virtcrypto_dev_stop() - Stop virtio crypto device > + * @vcrypto: Pointer to virtio crypto device. > + * > + * Function notifies all the registered services that the virtio crypto device > + * is ready to be used. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto) > +{ > + virtio_crypto_algs_unregister(); > +} > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild > index cd2be1c..4bdb84c 100644 > --- a/include/uapi/linux/Kbuild > +++ b/include/uapi/linux/Kbuild > @@ -460,6 +460,7 @@ header-y += virtio_rng.h > header-y += virtio_scsi.h > header-y += virtio_types.h > header-y += virtio_vsock.h > +header-y += virtio_crypto.h > header-y += vm_sockets.h > header-y += vt.h > header-y += vtpm_proxy.h > diff --git a/include/uapi/linux/virtio_crypto.h > b/include/uapi/linux/virtio_crypto.h > new file mode 100644 > index 0000000..50cdc8a > --- /dev/null > +++ b/include/uapi/linux/virtio_crypto.h > @@ -0,0 +1,450 @@ > +#ifndef _VIRTIO_CRYPTO_H > +#define _VIRTIO_CRYPTO_H > +/* This header is BSD licensed so anyone can use the definitions to implement > + * compatible drivers/servers. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions > + * are met: > + * 1. Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * 2. Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in the > + * documentation and/or other materials provided with the distribution. > + * 3. Neither the name of IBM nor the names of its contributors > + * may be used to endorse or promote products derived from this > software > + * without specific prior written permission. > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS > + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT > NOT > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND > FITNESS > + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM > OR > + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > NOT > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS > OF > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED > AND > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, > + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY > OUT > + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF > + * SUCH DAMAGE. > + */ > +#include <linux/types.h> > +#include <linux/virtio_types.h> > +#include <linux/virtio_ids.h> > +#include <linux/virtio_config.h> > + > + > +#define VIRTIO_CRYPTO_SERVICE_CIPHER 0 > +#define VIRTIO_CRYPTO_SERVICE_HASH 1 > +#define VIRTIO_CRYPTO_SERVICE_MAC 2 > +#define VIRTIO_CRYPTO_SERVICE_AEAD 3 > + > +#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) > + > +struct virtio_crypto_ctrl_header { > +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02) > +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03) > +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02) > +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03) > +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02) > +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03) > +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) > +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) > + __le32 opcode; > + __le32 algo; > + __le32 flag; > + /* data virtqueue id */ > + __le32 queue_id; > +}; > + > +struct virtio_crypto_cipher_session_para { > +#define VIRTIO_CRYPTO_NO_CIPHER 0 > +#define VIRTIO_CRYPTO_CIPHER_ARC4 1 > +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2 > +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3 > +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4 > +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5 > +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6 > +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7 > +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8 > +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9 > +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10 > +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11 > +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12 > +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13 > +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14 > + __le32 algo; > + /* length of key */ > + __le32 keylen; > + > +#define VIRTIO_CRYPTO_OP_ENCRYPT 1 > +#define VIRTIO_CRYPTO_OP_DECRYPT 2 > + /* encrypt or decrypt */ > + __le32 op; > + __le32 padding; > +}; > + > +struct virtio_crypto_session_input { > + /* Device-writable part */ > + __le64 session_id; > + __le32 status; > + __le32 padding; > +}; > + > +struct virtio_crypto_cipher_session_req { > + struct virtio_crypto_cipher_session_para para; > + __u8 padding[32]; > +}; > + > +struct virtio_crypto_hash_session_para { > +#define VIRTIO_CRYPTO_NO_HASH 0 > +#define VIRTIO_CRYPTO_HASH_MD5 1 > +#define VIRTIO_CRYPTO_HASH_SHA1 2 > +#define VIRTIO_CRYPTO_HASH_SHA_224 3 > +#define VIRTIO_CRYPTO_HASH_SHA_256 4 > +#define VIRTIO_CRYPTO_HASH_SHA_384 5 > +#define VIRTIO_CRYPTO_HASH_SHA_512 6 > +#define VIRTIO_CRYPTO_HASH_SHA3_224 7 > +#define VIRTIO_CRYPTO_HASH_SHA3_256 8 > +#define VIRTIO_CRYPTO_HASH_SHA3_384 9 > +#define VIRTIO_CRYPTO_HASH_SHA3_512 10 > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11 > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12 > + __le32 algo; > + /* hash result length */ > + __le32 hash_result_len; > + __u8 padding[8]; > +}; > + > +struct virtio_crypto_hash_create_session_req { > + struct virtio_crypto_hash_session_para para; > + __u8 padding[40]; > +}; > + > +struct virtio_crypto_mac_session_para { > +#define VIRTIO_CRYPTO_NO_MAC 0 > +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6 > +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25 > +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26 > +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27 > +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28 > +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41 > +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42 > +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49 > +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50 > +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53 > + __le32 algo; > + /* hash result length */ > + __le32 hash_result_len; > + /* length of authenticated key */ > + __le32 auth_key_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_mac_create_session_req { > + struct virtio_crypto_mac_session_para para; > + __u8 padding[40]; > +}; > + > +struct virtio_crypto_aead_session_para { > +#define VIRTIO_CRYPTO_NO_AEAD 0 > +#define VIRTIO_CRYPTO_AEAD_GCM 1 > +#define VIRTIO_CRYPTO_AEAD_CCM 2 > +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3 > + __le32 algo; > + /* length of key */ > + __le32 key_len; > + /* hash result length */ > + __le32 hash_result_len; > + /* length of the additional authenticated data (AAD) in bytes */ > + __le32 aad_len; > + /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */ > + __le32 op; > + __le32 padding; > +}; > + > +struct virtio_crypto_aead_create_session_req { > + struct virtio_crypto_aead_session_para para; > + __u8 padding[32]; > +}; > + > +struct virtio_crypto_alg_chain_session_para { > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1 > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2 > + __le32 alg_chain_order; > +/* Plain hash */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1 > +/* Authenticated hash (mac) */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2 > +/* Nested hash */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3 > + __le32 hash_mode; > + struct virtio_crypto_cipher_session_para cipher_param; > + union { > + struct virtio_crypto_hash_session_para hash_param; > + struct virtio_crypto_mac_session_para mac_param; > + __u8 padding[16]; > + } u; > + /* length of the additional authenticated data (AAD) in bytes */ > + __le32 aad_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_alg_chain_session_req { > + struct virtio_crypto_alg_chain_session_para para; > +}; > + > +struct virtio_crypto_sym_create_session_req { > + union { > + struct virtio_crypto_cipher_session_req cipher; > + struct virtio_crypto_alg_chain_session_req chain; > + __u8 padding[48]; > + } u; > + > + /* Device-readable part */ > + > +/* No operation */ > +#define VIRTIO_CRYPTO_SYM_OP_NONE 0 > +/* Cipher only operation on the data */ > +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1 > +/* > + * Chain any cipher with any hash or mac operation. The order > + * depends on the value of alg_chain_order param > + */ > +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2 > + __le32 op_type; > + __le32 padding; > +}; > + > +struct virtio_crypto_destroy_session_req { > + /* Device-readable part */ > + __le64 session_id; > + __u8 padding[48]; > +}; > + > +/* The request of the control virtqueue's packet */ > +struct virtio_crypto_op_ctrl_req { > + struct virtio_crypto_ctrl_header header; > + > + union { > + struct virtio_crypto_sym_create_session_req > + sym_create_session; > + struct virtio_crypto_hash_create_session_req > + hash_create_session; > + struct virtio_crypto_mac_create_session_req > + mac_create_session; > + struct virtio_crypto_aead_create_session_req > + aead_create_session; > + struct virtio_crypto_destroy_session_req > + destroy_session; > + __u8 padding[56]; > + } u; > +}; > + > +struct virtio_crypto_op_header { > +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00) > +#define VIRTIO_CRYPTO_CIPHER_DECRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01) > +#define VIRTIO_CRYPTO_HASH \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00) > +#define VIRTIO_CRYPTO_MAC \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00) > +#define VIRTIO_CRYPTO_AEAD_ENCRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) > +#define VIRTIO_CRYPTO_AEAD_DECRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) > + __le32 opcode; > + /* algo should be service-specific algorithms */ > + __le32 algo; > + /* session_id should be service-specific algorithms */ > + __le64 session_id; > + /* control flag to control the request */ > + __le32 flag; > + __le32 padding; > +}; > + > +struct virtio_crypto_cipher_para { > + /* > + * Byte Length of valid IV/Counter > + * > + * For block ciphers in CBC or F8 mode, or for Kasumi in F8 mode, or for > + * SNOW3G in UEA2 mode, this is the length of the IV (which > + * must be the same as the block length of the cipher). > + * For block ciphers in CTR mode, this is the length of the counter > + * (which must be the same as the block length of the cipher). > + * For AES-XTS, this is the 128bit tweak, i, from IEEE Std 1619-2007. > + * > + * The IV/Counter will be updated after every partial cryptographic > + * operation. > + */ > + __le32 iv_len; > + /* length of source data */ > + __le32 src_data_len; > + /* length of dst data */ > + __le32 dst_data_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_hash_para { > + /* length of source data */ > + __le32 src_data_len; > + /* hash result length */ > + __le32 hash_result_len; > +}; > + > +struct virtio_crypto_mac_para { > + struct virtio_crypto_hash_para hash; > +}; > + > +struct virtio_crypto_aead_para { > + /* > + * Byte Length of valid IV data pointed to by the below iv_addr > + * parameter. > + * > + * For GCM mode, this is either 12 (for 96-bit IVs) or 16, in which > + * case iv_addr points to J0. > + * For CCM mode, this is the length of the nonce, which can be in the > + * range 7 to 13 inclusive. > + */ > + __le32 iv_len; > + /* length of additional auth data */ > + __le32 aad_len; > + /* length of source data */ > + __le32 src_data_len; > + /* length of dst data */ > + __le32 dst_data_len; > +}; > + > +struct virtio_crypto_cipher_data_req { > + /* Device-readable part */ > + struct virtio_crypto_cipher_para para; > + __u8 padding[24]; > +}; > + > +struct virtio_crypto_hash_data_req { > + /* Device-readable part */ > + struct virtio_crypto_hash_para para; > + __u8 padding[40]; > +}; > + > +struct virtio_crypto_mac_data_req { > + /* Device-readable part */ > + struct virtio_crypto_mac_para para; > + __u8 padding[40]; > +}; > + > +struct virtio_crypto_alg_chain_data_para { > + __le32 iv_len; > + /* Length of source data */ > + __le32 src_data_len; > + /* Length of destination data */ > + __le32 dst_data_len; > + /* Starting point for cipher processing in source data */ > + __le32 cipher_start_src_offset; > + /* Length of the source data that the cipher will be computed on */ > + __le32 len_to_cipher; > + /* Starting point for hash processing in source data */ > + __le32 hash_start_src_offset; > + /* Length of the source data that the hash will be computed on */ > + __le32 len_to_hash; > + /* Length of the additional auth data */ > + __le32 aad_len; > + /* Length of the hash result */ > + __le32 hash_result_len; > + __le32 reserved; > +}; > + > +struct virtio_crypto_alg_chain_data_req { > + /* Device-readable part */ > + struct virtio_crypto_alg_chain_data_para para; > +}; > + > +struct virtio_crypto_sym_data_req { > + union { > + struct virtio_crypto_cipher_data_req cipher; > + struct virtio_crypto_alg_chain_data_req chain; > + __u8 padding[40]; > + } u; > + > + /* See above VIRTIO_CRYPTO_SYM_OP_* */ > + __le32 op_type; > + __le32 padding; > +}; > + > +struct virtio_crypto_aead_data_req { > + /* Device-readable part */ > + struct virtio_crypto_aead_para para; > + __u8 padding[32]; > +}; > + > +/* The request of the data virtqueue's packet */ > +struct virtio_crypto_op_data_req { > + struct virtio_crypto_op_header header; > + > + union { > + struct virtio_crypto_sym_data_req sym_req; > + struct virtio_crypto_hash_data_req hash_req; > + struct virtio_crypto_mac_data_req mac_req; > + struct virtio_crypto_aead_data_req aead_req; > + __u8 padding[48]; > + } u; > +}; > + > +#define VIRTIO_CRYPTO_OK 0 > +#define VIRTIO_CRYPTO_ERR 1 > +#define VIRTIO_CRYPTO_BADMSG 2 > +#define VIRTIO_CRYPTO_NOTSUPP 3 > +#define VIRTIO_CRYPTO_INVSESS 4 /* Invalid session id */ > + > +/* The accelerator hardware is ready */ > +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0) > + > +struct virtio_crypto_config { > + /* See VIRTIO_CRYPTO_OP_* above */ > + __u32 status; > + > + /* > + * Maximum number of data queue > + */ > + __u32 max_dataqueues; > + > + /* > + * Specifies the services mask which the device support, > + * see VIRTIO_CRYPTO_SERVICE_* above > + */ > + __u32 crypto_services; > + > + /* Detailed algorithms mask */ > + __u32 cipher_algo_l; > + __u32 cipher_algo_h; > + __u32 hash_algo; > + __u32 mac_algo_l; > + __u32 mac_algo_h; > + __u32 aead_algo; > + /* Maximum length of cipher key */ > + __u32 max_cipher_key_len; > + /* Maximum length of authenticated key */ > + __u32 max_auth_key_len; > + __u32 reserve; > + /* Maximum size of each crypto request's content */ > + __u64 max_size; > +}; > + > +struct virtio_crypto_inhdr { > + /* See VIRTIO_CRYPTO_* above */ > + __u8 status; > +}; > +#endif > diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h > index 3228d58..6d5c3b2 100644 > --- a/include/uapi/linux/virtio_ids.h > +++ b/include/uapi/linux/virtio_ids.h > @@ -42,5 +42,6 @@ > #define VIRTIO_ID_GPU 16 /* virtio GPU */ > #define VIRTIO_ID_INPUT 18 /* virtio input */ > #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ > +#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ > > #endif /* _LINUX_VIRTIO_IDS_H */ > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
