On Mon, Oct 17, 2016 at 01:28:00PM +0200, Marcus Folkesson wrote:
> i.MX6UL does only require three clocks to enable CAAM module.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Reviewed-by: Horia Geantă <horia.geanta@xxxxxxx>
> ---
> .../devicetree/bindings/crypto/fsl-sec4.txt | 20 +++++++++++++
> drivers/crypto/caam/ctrl.c | 35 ++++++++++++----------
> 2 files changed, 40 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
> index adeca34..10a425f 100644
> --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
> +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
> @@ -123,6 +123,9 @@ PROPERTIES
>
>
> EXAMPLE
> +
> +iMX6QDL/SX requires four clocks
> +
> crypto@300000 {
> compatible = "fsl,sec-v4.0";
> fsl,sec-era = <2>;
> @@ -139,6 +142,23 @@ EXAMPLE
> clock-names = "mem", "aclk", "ipg", "emi_slow";
> };
>
> +
> +iMX6UL does only require three clocks
> +
> + crypto: caam@2140000 {
> + compatible = "fsl,sec-v4.0";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x2140000 0x3c000>;
> + ranges = <0 0x2140000 0x3c000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
> + <&clks IMX6UL_CLK_CAAM_ACLK>,
> + <&clks IMX6UL_CLK_CAAM_IPG>;
> + clock-names = "mem", "aclk", "ipg";
> + };
> +
> =====================================================================
> Job Ring (JR) Node
>
> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
> index 0ec112e..5abaf37 100644
> --- a/drivers/crypto/caam/ctrl.c
> +++ b/drivers/crypto/caam/ctrl.c
> @@ -329,8 +329,8 @@ static int caam_remove(struct platform_device *pdev)
> clk_disable_unprepare(ctrlpriv->caam_ipg);
> clk_disable_unprepare(ctrlpriv->caam_mem);
> clk_disable_unprepare(ctrlpriv->caam_aclk);
> - clk_disable_unprepare(ctrlpriv->caam_emi_slow);
> -
> + if (!of_machine_is_compatible("fsl,imx6ul"))
> + clk_disable_unprepare(ctrlpriv->caam_emi_slow);
There is no need to re-lookup the platform here. Can't you check the
validity of ctrlpriv->caam_emi_slow ?
> return 0;
> }
>
> @@ -481,14 +481,16 @@ static int caam_probe(struct platform_device *pdev)
> }
> ctrlpriv->caam_aclk = clk;
>
> - clk = caam_drv_identify_clk(&pdev->dev, "emi_slow");
> - if (IS_ERR(clk)) {
> - ret = PTR_ERR(clk);
> - dev_err(&pdev->dev,
> - "can't identify CAAM emi_slow clk: %d\n", ret);
> - return ret;
> + if (!of_machine_is_compatible("fsl,imx6ul")) {
> + clk = caam_drv_identify_clk(&pdev->dev, "emi_slow");
> + if (IS_ERR(clk)) {
> + ret = PTR_ERR(clk);
> + dev_err(&pdev->dev,
> + "can't identify CAAM emi_slow clk: %d\n", ret);
> + return ret;
> + }
> + ctrlpriv->caam_emi_slow = clk;
> }
> - ctrlpriv->caam_emi_slow = clk;
>
> ret = clk_prepare_enable(ctrlpriv->caam_ipg);
> if (ret < 0) {
> @@ -509,11 +511,13 @@ static int caam_probe(struct platform_device *pdev)
> goto disable_caam_mem;
> }
>
> - ret = clk_prepare_enable(ctrlpriv->caam_emi_slow);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "can't enable CAAM emi slow clock: %d\n",
> - ret);
> - goto disable_caam_aclk;
> + if (!of_machine_is_compatible("fsl,imx6ul")) {
Same here.
> + ret = clk_prepare_enable(ctrlpriv->caam_emi_slow);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "can't enable CAAM emi slow clock: %d\n",
> + ret);
> + goto disable_caam_aclk;
> + }
> }
>
> /* Get configuration properties from device tree */
> @@ -829,7 +833,8 @@ caam_remove:
> iounmap_ctrl:
> iounmap(ctrl);
> disable_caam_emi_slow:
> - clk_disable_unprepare(ctrlpriv->caam_emi_slow);
> + if (!of_machine_is_compatible("fsl,imx6ul"))
> + clk_disable_unprepare(ctrlpriv->caam_emi_slow);
and here.
> disable_caam_aclk:
> clk_disable_unprepare(ctrlpriv->caam_aclk);
> disable_caam_mem:
> --
> 2.8.0
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
