While debugging setkey issues, the following warnings were found while trying to reinsert the caam module. Fix this by avoiding the duplicated cleanup in the probe path after caam_remove(), which has already cleaned up the resources. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/mm/vmalloc.c:1490 __vunmap+0xcc/0xf4 Trying to vfree() nonexistent vm area (f2400000) Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e734>] (warn_slowpath_fmt+0x40/0x48) [<c002e6f8>] (warn_slowpath_fmt) from [<c0151708>] (__vunmap+0xcc/0xf4) [<c015163c>] (__vunmap) from [<c015177c>] (vunmap+0x4c/0x54) [<c0151730>] (vunmap) from [<c001f48c>] (__iounmap+0x2c/0x30) [<c001f460>] (__iounmap) from [<c001f118>] (iounmap+0x1c/0x20) [<c001f0fc>] (iounmap) from [<bf247ae4>] (caam_probe+0x3dc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1786 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:594 clk_core_disable+0xe4/0x26c Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b113c>] (clk_core_disable+0xe4/0x26c) [<c05b1058>] (clk_core_disable) from [<c05b2e3c>] (clk_core_disable_lock+0x20/0x2c) [<c05b2e1c>] (clk_core_disable_lock) from [<c05b2e6c>] (clk_disable+0x24/0x28) [<c05b2e48>] (clk_disable) from [<bf247b04>] (caam_probe+0x3fc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1787 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:476 clk_core_unprepare+0x204/0x388 Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b0834>] (clk_core_unprepare+0x204/0x388) [<c05b0630>] (clk_core_unprepare) from [<c05b4c0c>] (clk_unprepare+0x2c/0x34) [<c05b4be0>] (clk_unprepare) from [<bf247b0c>] (caam_probe+0x404/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1788 ]--- Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- drivers/crypto/caam/ctrl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 0ec112ee5204..f4c044f5bcb2 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -826,6 +826,8 @@ static int caam_probe(struct platform_device *pdev) caam_remove: caam_remove(pdev); + return ret; + iounmap_ctrl: iounmap(ctrl); disable_caam_emi_slow: -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
