On Wed, Nov 11, 2015 at 02:35:56PM +0800, Zain Wang wrote:
> Add DT bindings documentation for the rk3288 crypto drivers.
>
> Signed-off-by: Zain Wang <zain.wang@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>
> Changed in v3:
> - add reset property
>
> Changed in v2:
> - None
>
> Changed in v1:
> - remove the _crypto suffix
> - use "rockchip,rk3288-crypto" instead of "rockchip,rk3288"
> - remove the description of status
>
>
> .../devicetree/bindings/crypto/rockchip-crypto.txt | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
>
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> new file mode 100644
> index 0000000..096df34
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> @@ -0,0 +1,29 @@
> +Rockchip Electronics And Security Accelerator
> +
> +Required properties:
> +- compatible: Should be "rockchip,rk3288-crypto"
> +- reg: Base physical address of the engine and length of memory mapped
> + region
> +- interrupts: Interrupt number
> +- clocks: Reference to the clocks about crypto
> +- clock-names: "aclk" used to clock data
> + "hclk" used to clock data
> + "sclk" used to clock crypto accelerator
> + "apb_pclk" used to clock dma
> +- resets: Must contain an entry for each entry in reset-names.
> + See ../reset/reset.txt for details.
> +- reset-names: Must include the name "crypto-rst".
> +
> +Examples:
> +
> + crypto: cypto-controller@ff8a0000 {
> + compatible = "rockchip,rk3288-crypto";
> + reg = <0xff8a0000 0x4000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> + clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> + resets = <&cru SRST_CRYPTO>;
> + reset-names = "crypto-rst";
> + status = "okay";
> + };
> --
> 1.9.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
