Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.
Signed-off-by: Victoria Milhoan <vicki.milhoan@xxxxxxxxxxxxx>
---
drivers/crypto/caam/desc.h | 25 +++++++++++++++++++++----
drivers/crypto/caam/sg_sw_sec4.h | 1 -
2 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/caam/desc.h b/drivers/crypto/caam/desc.h
index d397ff9..405acbf 100644
--- a/drivers/crypto/caam/desc.h
+++ b/drivers/crypto/caam/desc.h
@@ -8,12 +8,29 @@
#ifndef DESC_H
#define DESC_H
+/*
+ * 16-byte hardware scatter/gather table
+ * An 8-byte table exists in the hardware spec, but has never been
+ * implemented to date. The 8/16 option is selected at RTL-compile-time.
+ * and this selection is visible in the Compile Time Parameters Register
+ */
+
+#define SEC4_SG_LEN_EXT 0x80000000 /* Entry points to table */
+#define SEC4_SG_LEN_FIN 0x40000000 /* Last ent in table */
+#define SEC4_SG_BPID_MASK 0x000000ff
+#define SEC4_SG_BPID_SHIFT 16
+#define SEC4_SG_LEN_MASK 0x3fffffff /* Excludes EXT and FINAL */
+#define SEC4_SG_OFFS_MASK 0x00001fff
+
struct sec4_sg_entry {
- u64 ptr;
-#define SEC4_SG_LEN_FIN 0x40000000
-#define SEC4_SG_LEN_EXT 0x80000000
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ dma_addr_t ptr;
+#else
+ u32 rsvd1;
+ dma_addr_t ptr;
+#endif
u32 len;
- u8 reserved;
+ u8 rsvd2;
u8 buf_pool_id;
u16 offset;
};
diff --git a/drivers/crypto/caam/sg_sw_sec4.h b/drivers/crypto/caam/sg_sw_sec4.h
index b68b74c..711bb39 100644
--- a/drivers/crypto/caam/sg_sw_sec4.h
+++ b/drivers/crypto/caam/sg_sw_sec4.h
@@ -15,7 +15,6 @@ static inline void dma_to_sec4_sg_one(struct sec4_sg_entry *sec4_sg_ptr,
{
sec4_sg_ptr->ptr = dma;
sec4_sg_ptr->len = len;
- sec4_sg_ptr->reserved = 0;
sec4_sg_ptr->buf_pool_id = 0;
sec4_sg_ptr->offset = offset;
#ifdef DEBUG
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
