Hi, as of now, the DRBG is only seeded from get_random_bytes. In various circumstances, the nonblocking_pool behind get_random_bytes may not be fully seeded from hardware events at the time the DRBG requires to be seeded. Based on the discussion in [1], the DRBG seeding is updated such that it does not completely rely on get_random_bytes any more. The seeding approach can be characterized as follows: 1. pull buffer of size entropy + nonce from get_random_bytes 2. pull another buffer of size entropy + nonce from my Jitter RNG 3. concatenate both buffers 4. seed the DRBG with the concatenated buffer 5. trigger the async invocation of the blocking API for accessing the nonblocking pool with a buffer of size entropy 6. return the DRBG instance to the caller without waiting for the completion of step 5 7. at some point in time, the blocking API returns with a full buffer which is then used to re-seed the DRBG This way, we will get entropy during the first initialization without blocking. The patch set adds an asynchronous API to access the nonblocking pool to wait until the nonblocking pool is initialized. A test module for testing the asynchronous operation is given with the code below. Note: the DRBG and Jitter RNG patches are against the current cryptodev-2.6 tree. The new Jitter RNG is an RNG that has large set of tests and was presented on LKML some time back. After speaking with mathematicians at NIST, that Jitter RNG approach would be acceptable from their side as a noise source. Note, I personally think that the Jitter RNG has sufficient entropy in almost all circumstances (see the massive testing I conducted on all more widely used CPUs as shown in [2]). Changes v5: * drop patch 01 and therefore drop the creation of a kernel pool * change patch 02 to use the nonblocking pool and block until the nonblocking pool is initialized or until the cancel operation is triggered. Changes v4: * Patch 02: Change get_blocking_random_bytes_cb to allow callers to call it multiple times without re-initializing the work data structure. Furthermore, only change the pointers to the output buffer and callback if work is not pending to avoid race conditions. * Patch 04: No canceling of seeding during drbg_seed as the invocation of get_blocking_random_bytes_cb can now be done repeatedly without re-initializing the work data structure. Changes v3: * Patch 01: Correct calculation of entropy count as pointed out by Herbert Xu * Patch 06: Correct a trivial coding issue in jent_entropy_init for checking JENT_EMINVARVAR reported by cppcheck Changes v2: * Use Dual BSD/GPL license in MODULE_LICENSE as suggested by Paul Bolle <pebolle@xxxxxxxxxx> * Patch 05, drbg_dealloc_state: only deallocate Jitter RNG if one was instantiated in the first place. There are two main reasons why the Jitter RNG may not be allocated: either it is not available as kernel module/in vmlinuz or during init time of the Jitter RNG, the performed testing shows that the underlying hardware is not suitable for the Jitter RNG (e.g. has a too coarse timer). [1] http://www.mail-archive.com/linux-crypto@xxxxxxxxxxxxxxx/msg13891.html [2] http://www.chronox.de/jent.html Stephan Mueller (5): random: Async and sync API for accessing nonblocking_pool crypto: drbg - prepare for async seeding crypto: drbg - add async seeding operation crypto: drbg - use Jitter RNG to obtain seed crypto: add jitterentropy RNG crypto/Kconfig | 10 + crypto/Makefile | 2 + crypto/drbg.c | 156 +++++++-- crypto/jitterentropy.c | 909 +++++++++++++++++++++++++++++++++++++++++++++++++ crypto/testmgr.c | 4 + drivers/char/random.c | 104 ++++++ include/crypto/drbg.h | 4 + include/linux/random.h | 20 ++ 8 files changed, 1182 insertions(+), 27 deletions(-) create mode 100644 crypto/jitterentropy.c --- /* * Test module for verifying the correct operation of the * in-kernel /dev/random handling * * Use: compile, load into the kernel and observe dmesg * * Written by: Stephan Mueller <smueller@xxxxxxxxxx> * Copyright (c) 2014 * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, and the entire permission notice in its entirety, * including the disclaimer of warranties. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * ALTERNATIVELY, this product may be distributed under the terms of * the GNU General Public License, in which case the provisions of the GPL are * required INSTEAD OF the above restrictions. (This clause is * necessary due to a potential bad interaction between the GPL and * the restrictions contained in a BSD-style copyright.) * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF * WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. */ #include <linux/random.h> #include <linux/module.h> #include <linux/slab.h> MODULE_LICENSE("GPL"); MODULE_AUTHOR("Stephan Mueller <smueller@xxxxxxxxxx>"); MODULE_DESCRIPTION("Test module for verifying the correct operation of async LRNG operation"); static struct random_work my_work; static struct random_work my_work1; static struct random_work my_work2; static struct random_work my_work3; static struct random_work my_work4; static struct random_work my_work5; static struct random_work my_work6; static struct random_work my_work7; static struct random_work my_work8; static struct random_work my_work9; #define LEN 10 static char buffer[LEN]; static char *string = "a"; static char *string2 = "b"; static char *string3 = "c"; static char *string4 = "d"; static char *string5 = "e"; static char *string6 = "f"; static char *string7 = "g"; static char *string8 = "h"; static char *string9 = "i"; void lrng_cb(void *buf, ssize_t buflen, void *private) { printk("received %d bytes for %s\n", (int)buflen, (char *)private); } static void cn(struct random_work *work) { get_blocking_random_bytes_cancel(work); cancel_work_sync(&work->rw_work); } static int __init lrng_init(void) { get_blocking_random_bytes_cb(NULL, &my_work, buffer, LEN, string, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work1, buffer, LEN, string, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work2, buffer, LEN, string2, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work3, buffer, LEN, string3, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work4, buffer, LEN, string4, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work5, buffer, LEN, string5, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work6, buffer, LEN, string6, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work7, buffer, LEN, string7, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work8, buffer, LEN, string8, lrng_cb); get_blocking_random_bytes_cb(NULL, &my_work9, buffer, LEN, string9, lrng_cb); /* * cancel one work to see that work can be canceled independent from * others */ cn(&my_work); /* try again to verify that double cancellation is harmless */ cn(&my_work); return 0; } static void __exit lrng_exit(void) { cn(&my_work1); cn(&my_work2); cn(&my_work3); cn(&my_work4); cn(&my_work5); cn(&my_work6); cn(&my_work7); cn(&my_work8); cn(&my_work9); } module_init(lrng_init); module_exit(lrng_exit); -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
