Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
---
drivers/crypto/Kconfig | 17 +
drivers/crypto/Makefile | 1 +
drivers/crypto/sunxi-ss/Makefile | 2 +
drivers/crypto/sunxi-ss/sunxi-ss-cipher.c | 544 ++++++++++++++++++++++++++++++
drivers/crypto/sunxi-ss/sunxi-ss-core.c | 411 ++++++++++++++++++++++
drivers/crypto/sunxi-ss/sunxi-ss-hash.c | 481 ++++++++++++++++++++++++++
drivers/crypto/sunxi-ss/sunxi-ss.h | 198 +++++++++++
7 files changed, 1654 insertions(+)
create mode 100644 drivers/crypto/sunxi-ss/Makefile
create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-core.c
create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash.c
create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss.h
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 2fb0fdf..9ba9759 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -436,4 +436,21 @@ config CRYPTO_DEV_QCE
hardware. To compile this driver as a module, choose M here. The
module will be called qcrypto.
+config CRYPTO_DEV_SUNXI_SS
+ tristate "Support for Allwinner Security System cryptographic accelerator"
+ depends on ARCH_SUNXI
+ select CRYPTO_MD5
+ select CRYPTO_SHA1
+ select CRYPTO_AES
+ select CRYPTO_DES
+ select CRYPTO_BLKCIPHER
+ help
+ Some Allwinner SoC have a crypto accelerator named
+ Security System. Select this if you want to use it.
+ The Security System handle AES/DES/3DES ciphers in CBC mode
+ and SHA1 and MD5 hash algorithms.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunxi-ss.
+
endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 3924f93..856545c 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/
diff --git a/drivers/crypto/sunxi-ss/Makefile b/drivers/crypto/sunxi-ss/Makefile
new file mode 100644
index 0000000..8bb287d
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
+sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o
diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
new file mode 100644
index 0000000..adb71f9
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
@@ -0,0 +1,544 @@
+/*
+ * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
+ *
+ * This file add support for AES cipher with 128,192,256 bits
+ * keysize in CBC mode.
+ * Add support also for DES and 3DES in CBC mode.
+ *
+ * You could find the datasheet in Documentation/arm/sunxi/README
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "sunxi-ss.h"
+
+/* CBC AES */
+int sunxi_ss_cbc_aes_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_aes_poll(areq, mode);
+}
+
+int sunxi_ss_cbc_aes_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_aes_poll(areq, mode);
+}
+
+/* ECB AES */
+int sunxi_ss_ecb_aes_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_aes_poll(areq, mode);
+}
+
+int sunxi_ss_ecb_aes_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_AES | SS_ECB | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_aes_poll(areq, mode);
+}
+
+/* CBC DES */
+int sunxi_ss_cbc_des_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+int sunxi_ss_cbc_des_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+/* ECB DES */
+int sunxi_ss_ecb_des_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+int sunxi_ss_ecb_des_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+/* CBC 3DES */
+int sunxi_ss_cbc_des3_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+int sunxi_ss_cbc_des3_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_3DES | SS_CBC | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+/* ECB 3DES */
+int sunxi_ss_ecb_des3_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_ENCRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+int sunxi_ss_ecb_des3_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ u32 mode;
+
+ mode = SS_OP_3DES | SS_ECB | SS_ENABLED | SS_DECRYPTION | op->keymode;
+ return sunxi_ss_des_poll(areq, mode);
+}
+
+int sunxi_ss_cipher_init(struct crypto_tfm *tfm)
+{
+ struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm);
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct sunxi_ss_alg_template *algt;
+
+ memset(op, 0, sizeof(struct sunxi_tfm_ctx));
+
+ algt = container_of(alg, struct sunxi_ss_alg_template, alg.crypto);
+ op->ss = algt->ss;
+
+ return 0;
+}
+
+int sunxi_ss_cipher_des_init(struct crypto_tfm *tfm)
+{
+ const char *name = crypto_tfm_alg_name(tfm);
+ struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm);
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct sunxi_ss_alg_template *algt;
+ struct sunxi_ss_ctx *ss;
+
+ memset(op, 0, sizeof(struct sunxi_tfm_ctx));
+
+ algt = container_of(alg, struct sunxi_ss_alg_template, alg.crypto);
+ ss = algt->ss;
+ op->ss = algt->ss;
+
+ op->fallback = crypto_alloc_ablkcipher(name, 0,
+ CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(op->fallback)) {
+ dev_err(ss->dev, "ERROR: allocating fallback algo %s\n", name);
+ return PTR_ERR(op->fallback);
+ }
+ return 0;
+}
+
+void sunxi_ss_cipher_exit(struct crypto_tfm *tfm)
+{
+ struct sunxi_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if (ctx->fallback)
+ crypto_free_ablkcipher(ctx->fallback);
+ ctx->fallback = NULL;
+}
+
+/*
+ * Optimized function for the case where we have only one SG,
+ * so we can use kmap_atomic
+ */
+static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq)
+{
+ u32 spaces;
+ struct scatterlist *in_sg = areq->src;
+ struct scatterlist *out_sg = areq->dst;
+ void *src_addr;
+ void *dst_addr;
+ unsigned int ileft = areq->nbytes;
+ unsigned int oleft = areq->nbytes;
+ unsigned int todo;
+ u32 *src32;
+ u32 *dst32;
+ u32 rx_cnt = 32;
+ u32 tx_cnt = 0;
+ int i;
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+
+ if (areq->nbytes == 0)
+ return 0;
+
+ if (areq->info == NULL) {
+ dev_err(ss->dev, "ERROR: Empty IV\n");
+ return -EINVAL;
+ }
+
+ if (areq->src == NULL || areq->dst == NULL) {
+ dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
+ return -EINVAL;
+ }
+
+ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "kmap_atomic error for src SG\n");
+ return -EINVAL;
+ }
+
+ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
+ if (dst_addr == NULL) {
+ dev_err(ss->dev, "kmap_atomic error for dst SG\n");
+ kunmap_atomic(src_addr);
+ return -EINVAL;
+ }
+
+ src32 = (u32 *)src_addr;
+ dst32 = (u32 *)dst_addr;
+ ileft = areq->nbytes / 4;
+ oleft = areq->nbytes / 4;
+ i = 0;
+ do {
+ if (ileft > 0 && rx_cnt > 0) {
+ todo = min(rx_cnt, ileft);
+ ileft -= todo;
+ writesl(ss->base + SS_RXFIFO, src32, todo);
+ src32 += todo;
+ }
+ if (tx_cnt > 0) {
+ todo = min(tx_cnt, oleft);
+ oleft -= todo;
+ readsl(ss->base + SS_TXFIFO, dst32, todo);
+ dst32 += todo;
+ }
+ spaces = readl(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(spaces);
+ tx_cnt = SS_TXFIFO_SPACES(spaces);
+ } while (oleft > 0);
+ kunmap_atomic(dst_addr);
+ kunmap_atomic(src_addr);
+ return 0;
+}
+
+int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode)
+{
+ u32 spaces;
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
+ /* when activating SS, the default FIFO space is 32 */
+ u32 rx_cnt = 32;
+ u32 tx_cnt = 0;
+ u32 v;
+ int i, err = 0;
+ struct scatterlist *in_sg = areq->src;
+ struct scatterlist *out_sg = areq->dst;
+ void *src_addr;
+ void *dst_addr;
+ unsigned int ileft = areq->nbytes;
+ unsigned int oleft = areq->nbytes;
+ unsigned int sgileft = areq->src->length;
+ unsigned int sgoleft = areq->dst->length;
+ unsigned int todo;
+ u32 *src32;
+ u32 *dst32;
+ unsigned long flags;
+
+ if (areq->nbytes == 0)
+ return 0;
+
+ if (areq->info == NULL) {
+ dev_err(ss->dev, "ERROR: Empty IV\n");
+ return -EINVAL;
+ }
+
+ if (areq->src == NULL || areq->dst == NULL) {
+ dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ss->slock, flags);
+
+ for (i = 0; i < op->keylen; i += 4)
+ writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
+
+ if (areq->info != NULL) {
+ for (i = 0; i < 4 && i < ivsize / 4; i++) {
+ v = *(u32 *)(areq->info + i * 4);
+ writel(v, ss->base + SS_IV0 + i * 4);
+ }
+ }
+ writel(mode, ss->base + SS_CTL);
+
+ /* If we have only one SG, we can use kmap_atomic */
+ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) {
+ err = sunxi_ss_aes_poll_atomic(areq);
+ goto release_ss;
+ }
+
+ /*
+ * If we have more than one SG, we cannot use kmap_atomic since
+ * we hold the mapping too long
+ */
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "KMAP error for src SG\n");
+ err = -EINVAL;
+ goto release_ss;
+ }
+ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset;
+ if (dst_addr == NULL) {
+ kunmap(sg_page(in_sg));
+ dev_err(ss->dev, "KMAP error for dst SG\n");
+ err = -EINVAL;
+ goto release_ss;
+ }
+ src32 = (u32 *)src_addr;
+ dst32 = (u32 *)dst_addr;
+ ileft = areq->nbytes / 4;
+ oleft = areq->nbytes / 4;
+ sgileft = in_sg->length / 4;
+ sgoleft = out_sg->length / 4;
+ do {
+ spaces = readl_relaxed(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(spaces);
+ tx_cnt = SS_TXFIFO_SPACES(spaces);
+ todo = min3(rx_cnt, ileft, sgileft);
+ if (todo > 0) {
+ ileft -= todo;
+ sgileft -= todo;
+ writesl(ss->base + SS_RXFIFO, src32, todo);
+ src32 += todo;
+ }
+ if (in_sg != NULL && sgileft == 0 && ileft > 0) {
+ kunmap(sg_page(in_sg));
+ in_sg = sg_next(in_sg);
+ while (in_sg != NULL && in_sg->length == 0)
+ in_sg = sg_next(in_sg);
+ if (in_sg != NULL && ileft > 0) {
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "ERROR: KMAP for src SG\n");
+ err = -EINVAL;
+ goto release_ss;
+ }
+ src32 = src_addr;
+ sgileft = in_sg->length / 4;
+ }
+ }
+ /* do not test oleft since when oleft == 0 we have finished */
+ todo = min3(tx_cnt, oleft, sgoleft);
+ if (todo > 0) {
+ oleft -= todo;
+ sgoleft -= todo;
+ readsl(ss->base + SS_TXFIFO, dst32, todo);
+ dst32 += todo;
+ }
+ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) {
+ kunmap(sg_page(out_sg));
+ out_sg = sg_next(out_sg);
+ while (out_sg != NULL && out_sg->length == 0)
+ out_sg = sg_next(out_sg);
+ if (out_sg != NULL && oleft > 0) {
+ dst_addr = kmap(sg_page(out_sg)) +
+ out_sg->offset;
+ if (dst_addr == NULL) {
+ dev_err(ss->dev, "KMAP error\n");
+ err = -EINVAL;
+ goto release_ss;
+ }
+ dst32 = dst_addr;
+ sgoleft = out_sg->length / 4;
+ }
+ }
+ } while (oleft > 0);
+
+release_ss:
+ writel_relaxed(0, ss->base + SS_CTL);
+ spin_unlock_irqrestore(&ss->slock, flags);
+ return err;
+}
+
+/* Pure CPU driven way of doing DES/3DES with SS */
+int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+ int i, err = 0;
+ int no_chunk = 1;
+ struct scatterlist *in_sg = areq->src;
+ struct scatterlist *out_sg = areq->dst;
+ u8 kkey[256 / 8];
+
+ if (areq->nbytes == 0)
+ return 0;
+
+ if (areq->info == NULL) {
+ dev_err(ss->dev, "ERROR: Empty IV\n");
+ return -EINVAL;
+ }
+
+ if (areq->src == NULL || areq->dst == NULL) {
+ dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
+ return -EINVAL;
+ }
+
+ /*
+ * if we have only SGs with size multiple of 4,
+ * we can use the SS AES function
+ */
+ while (in_sg != NULL && no_chunk == 1) {
+ if ((in_sg->length % 4) != 0)
+ no_chunk = 0;
+ in_sg = sg_next(in_sg);
+ }
+ while (out_sg != NULL && no_chunk == 1) {
+ if ((out_sg->length % 4) != 0)
+ no_chunk = 0;
+ out_sg = sg_next(out_sg);
+ }
+
+ if (no_chunk == 1)
+ return sunxi_ss_aes_poll(areq, mode);
+
+ /*
+ * if some SG are not multiple of 4bytes use a fallback
+ * it is much easy and clean
+ */
+ ablkcipher_request_set_tfm(areq, op->fallback);
+ for (i = 0; i < op->keylen; i++)
+ *(u32 *)(kkey + i * 4) = op->key[i];
+
+ err = crypto_ablkcipher_setkey(op->fallback, kkey, op->keylen);
+ if (err != 0) {
+ dev_err(ss->dev, "Cannot set key on fallback\n");
+ return -EINVAL;
+ }
+
+ if ((mode & SS_DECRYPTION) == SS_DECRYPTION)
+ err = crypto_ablkcipher_decrypt(areq);
+ else
+ err = crypto_ablkcipher_encrypt(areq);
+ ablkcipher_request_set_tfm(areq, tfm);
+ return err;
+}
+
+/* check and set the AES key, prepare the mode to be used */
+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+
+ switch (keylen) {
+ case 128 / 8:
+ op->keymode = SS_AES_128BITS;
+ break;
+ case 192 / 8:
+ op->keymode = SS_AES_192BITS;
+ break;
+ case 256 / 8:
+ op->keymode = SS_AES_256BITS;
+ break;
+ default:
+ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
+
+/* check and set the DES key, prepare the mode to be used */
+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+ u32 flags;
+ u32 tmp[DES_EXPKEY_WORDS];
+ int ret;
+
+ if (unlikely(keylen != DES_KEY_SIZE)) {
+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ flags = crypto_ablkcipher_get_flags(tfm);
+
+ ret = des_ekey(tmp, key);
+ if (unlikely(ret == 0) && (flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_WEAK_KEY);
+ dev_err(ss->dev, "Weak key %u\n", keylen);
+ return -EINVAL;
+ }
+
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
+
+/* check and set the 3DES key, prepare the mode to be used */
+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ struct sunxi_ss_ctx *ss = op->ss;
+
+ if (unlikely(keylen != 3 * DES_KEY_SIZE)) {
+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
new file mode 100644
index 0000000..1569be4
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
@@ -0,0 +1,411 @@
+/*
+ * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
+ *
+ * Core file which registers crypto algorithms supported by the SS.
+ *
+ * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <crypto/scatterwalk.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include "sunxi-ss.h"
+
+static struct sunxi_ss_alg_template driver_algs[] = {
+{ .type = CRYPTO_ALG_TYPE_AHASH,
+ .alg.hash = {
+ .init = sunxi_hash_init,
+ .update = sunxi_hash_update,
+ .final = sunxi_hash_final,
+ .finup = sunxi_hash_finup,
+ .digest = sunxi_hash_digest,
+ .export = sunxi_hash_export,
+ .import = sunxi_hash_import,
+ .halg = {
+ .digestsize = MD5_DIGEST_SIZE,
+ .base = {
+ .cra_name = "md5",
+ .cra_driver_name = "md5-sunxi-ss",
+ .cra_priority = 300,
+ .cra_alignmask = 3,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ahash_type,
+ .cra_init = sunxi_hash_crainit
+ }
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_AHASH,
+ .alg.hash = {
+ .init = sunxi_hash_init,
+ .update = sunxi_hash_update,
+ .final = sunxi_hash_final,
+ .finup = sunxi_hash_finup,
+ .digest = sunxi_hash_digest,
+ .export = sunxi_hash_export,
+ .import = sunxi_hash_import,
+ .halg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-sunxi-ss",
+ .cra_priority = 300,
+ .cra_alignmask = 3,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ahash_type,
+ .cra_init = sunxi_hash_crainit
+ }
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_ctxsize = sizeof(struct sunxi_tfm_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = sunxi_ss_aes_setkey,
+ .encrypt = sunxi_ss_cbc_aes_encrypt,
+ .decrypt = sunxi_ss_cbc_aes_decrypt,
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "ecb-aes-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC,
+ .cra_ctxsize = sizeof(struct sunxi_tfm_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = sunxi_ss_aes_setkey,
+ .encrypt = sunxi_ss_ecb_aes_encrypt,
+ .decrypt = sunxi_ss_ecb_aes_decrypt,
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(des)",
+ .cra_driver_name = "cbc-des-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_des_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sunxi_ss_des_setkey,
+ .encrypt = sunxi_ss_cbc_des_encrypt,
+ .decrypt = sunxi_ss_cbc_des_decrypt,
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(des)",
+ .cra_driver_name = "ecb-des-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_des_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .setkey = sunxi_ss_des_setkey,
+ .encrypt = sunxi_ss_ecb_des_encrypt,
+ .decrypt = sunxi_ss_ecb_des_decrypt,
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_des_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = sunxi_ss_des3_setkey,
+ .encrypt = sunxi_ss_cbc_des3_encrypt,
+ .decrypt = sunxi_ss_cbc_des3_decrypt,
+ }
+ }
+},
+{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_ss_cipher_des_init,
+ .cra_exit = sunxi_ss_cipher_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = sunxi_ss_des3_setkey,
+ .encrypt = sunxi_ss_ecb_des3_encrypt,
+ .decrypt = sunxi_ss_ecb_des3_decrypt,
+ }
+ }
+},
+};
+
+static int sunxi_ss_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ u32 v;
+ int err, i;
+ unsigned long cr;
+ const unsigned long cr_ahb = 24 * 1000 * 1000;
+ const unsigned long cr_mod = 150 * 1000 * 1000;
+ struct sunxi_ss_ctx *ss;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
+ if (ss == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ss->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ss->base)) {
+ dev_err(&pdev->dev, "Cannot request MMIO\n");
+ return PTR_ERR(ss->base);
+ }
+
+ ss->ssclk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(ss->ssclk)) {
+ err = PTR_ERR(ss->ssclk);
+ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
+ return err;
+ }
+ dev_dbg(&pdev->dev, "clock ss acquired\n");
+
+ ss->busclk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(ss->busclk)) {
+ err = PTR_ERR(ss->busclk);
+ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
+ return err;
+ }
+ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
+
+ /* Enable both clocks */
+ err = clk_prepare_enable(ss->busclk);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
+ return err;
+ }
+ err = clk_prepare_enable(ss->ssclk);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
+ goto error_ssclk;
+ }
+
+ /*
+ * Check that clock have the correct rates gived in the datasheet
+ * Try to set the clock to the maximum allowed
+ */
+ err = clk_set_rate(ss->ssclk, cr_mod);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
+ goto error_clk;
+ }
+
+ /*
+ * The only impact on clocks below requirement are bad performance,
+ * so do not print "errors"
+ * warn on Overclocked clocks
+ */
+ cr = clk_get_rate(ss->busclk);
+ if (cr >= cr_ahb)
+ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
+ cr, cr / 1000000, cr_ahb);
+ else
+ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
+ cr, cr / 1000000, cr_ahb);
+
+ cr = clk_get_rate(ss->ssclk);
+ if (cr <= cr_mod)
+ if (cr < cr_mod)
+ dev_warn(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
+ cr, cr / 1000000, cr_mod);
+ else
+ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
+ cr, cr / 1000000, cr_mod);
+ else
+ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
+ cr, cr / 1000000, cr_mod);
+
+ /*
+ * Datasheet named it "Die Bonding ID"
+ * I expect to be a sort of Security System Revision number.
+ * Since the A80 seems to have an other version of SS
+ * this info could be useful
+ */
+ writel(SS_ENABLED, ss->base + SS_CTL);
+ v = readl(ss->base + SS_CTL);
+ v >>= 16;
+ v &= 0x07;
+ dev_info(&pdev->dev, "Die ID %d\n", v);
+ writel(0, ss->base + SS_CTL);
+
+ ss->dev = &pdev->dev;
+
+ spin_lock_init(&ss->slock);
+
+ for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
+ driver_algs[i].ss = ss;
+ switch (driver_algs[i].type) {
+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
+ err = crypto_register_alg(&driver_algs[i].alg.crypto);
+ if (err != 0)
+ goto error_alg;
+ break;
+ case CRYPTO_ALG_TYPE_AHASH:
+ err = crypto_register_ahash(&driver_algs[i].alg.hash);
+ if (err != 0)
+ goto error_alg;
+ break;
+ }
+ }
+ platform_set_drvdata(pdev, ss);
+ return 0;
+error_alg:
+ i--;
+ for (; i >= 0; i--) {
+ switch (driver_algs[i].type) {
+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
+ crypto_unregister_alg(&driver_algs[i].alg.crypto);
+ break;
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_unregister_ahash(&driver_algs[i].alg.hash);
+ break;
+ }
+ }
+error_clk:
+ clk_disable_unprepare(ss->ssclk);
+error_ssclk:
+ clk_disable_unprepare(ss->busclk);
+ return err;
+}
+
+static int sunxi_ss_remove(struct platform_device *pdev)
+{
+ int i;
+ struct sunxi_ss_ctx *ss = platform_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
+ switch (driver_algs[i].type) {
+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
+ crypto_unregister_alg(&driver_algs[i].alg.crypto);
+ break;
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_unregister_ahash(&driver_algs[i].alg.hash);
+ break;
+ }
+ }
+
+ writel(0, ss->base + SS_CTL);
+ clk_disable_unprepare(ss->busclk);
+ clk_disable_unprepare(ss->ssclk);
+ return 0;
+}
+
+static const struct of_device_id a20ss_crypto_of_match_table[] = {
+ { .compatible = "allwinner,sun7i-a20-crypto" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
+
+static struct platform_driver sunxi_ss_driver = {
+ .probe = sunxi_ss_probe,
+ .remove = sunxi_ss_remove,
+ .driver = {
+ .name = "sunxi-ss",
+ .of_match_table = a20ss_crypto_of_match_table,
+ },
+};
+
+module_platform_driver(sunxi_ss_driver);
+
+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@xxxxxxxxx>");
diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-hash.c b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
new file mode 100644
index 0000000..7087806
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
@@ -0,0 +1,481 @@
+/*
+ * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
+ *
+ * This file add support for MD5 and SHA1.
+ *
+ * You could find the datasheet in Documentation/arm/sunxi/README
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "sunxi-ss.h"
+
+/* This is a totaly arbitrary value */
+#define SS_TIMEOUT 100
+
+int sunxi_hash_crainit(struct crypto_tfm *tfm)
+{
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct sunxi_req_ctx));
+ return 0;
+}
+
+/* sunxi_hash_init: initialize request context */
+int sunxi_hash_init(struct ahash_request *areq)
+{
+ const char *hash_type;
+ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct ahash_alg *alg = __crypto_ahash_alg(tfm->base.__crt_alg);
+ struct sunxi_ss_alg_template *algt;
+ struct sunxi_ss_ctx *ss;
+
+ memset(op, 0, sizeof(struct sunxi_req_ctx));
+
+ algt = container_of(alg, struct sunxi_ss_alg_template, alg.hash);
+ ss = algt->ss;
+ op->ss = algt->ss;
+
+ hash_type = crypto_tfm_alg_name(areq->base.tfm);
+
+ if (strcmp(hash_type, "sha1") == 0)
+ op->mode = SS_OP_SHA1;
+ else if (strcmp(hash_type, "md5") == 0)
+ op->mode = SS_OP_MD5;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+int sunxi_hash_export(struct ahash_request *areq, void *out)
+{
+ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
+
+ memcpy(out, op, sizeof(struct sunxi_req_ctx));
+ return 0;
+}
+
+int sunxi_hash_import(struct ahash_request *areq, const void *in)
+{
+ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
+
+ memcpy(op, in, sizeof(struct sunxi_req_ctx));
+ return 0;
+}
+
+/*
+ * sunxi_hash_update: update hash engine
+ *
+ * Could be used for both SHA1 and MD5
+ * Write data by step of 32bits and put then in the SS.
+ *
+ * Since we cannot leave partial data and hash state in the engine,
+ * we need to get the hash state at the end of this function.
+ * After some work, I have found that we can get the hash state every 64 bytes
+ *
+ * So the first work is to get the number of bytes to write to SS modulo 64
+ * The extra bytes will go to two different destination:
+ * op->wait for full 32bits word
+ * op->wb (waiting bytes) for partial 32 bits word
+ * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb
+ *
+ * So at the begin of update()
+ * if op->nwait * 4 + areq->nbytes < 64
+ * => all data will be writen to wait buffers and end=0
+ * if not, write all nwait to the device and position end to complete to 64bytes
+ *
+ * example 1:
+ * update1 60o => nwait=15
+ * update2 60o => need one more word to have 64 bytes
+ * end=4
+ * so write all data in op->wait and one word of SGs
+ * write remaining data in op->wait
+ * final state op->nwait=14
+ */
+int sunxi_hash_update(struct ahash_request *areq)
+{
+ u32 v, ivmode = 0;
+ unsigned int i = 0;
+ /*
+ * i is the total bytes read from SGs, to be compared to areq->nbytes
+ * i is important because we cannot rely on SG length since the sum of
+ * SG->length could be greater than areq->nbytes
+ */
+
+ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
+ struct sunxi_ss_ctx *ss = op->ss;
+ struct scatterlist *in_sg;
+ unsigned int in_i = 0; /* advancement in the current SG */
+ unsigned int end;
+ /*
+ * end is the position when we need to stop writing to the device,
+ * to be compared to i
+ * So end is always a multiple of 64
+ * if end = 0 all data must be kept for later use and no write
+ * on the device is done.
+ */
+ int in_r, err = 0;
+ void *src_addr;
+ unsigned int todo;
+ u32 spaces, rx_cnt;
+ unsigned long flags = 0;
+
+ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u h0=%0x",
+ __func__, crypto_tfm_alg_name(areq->base.tfm),
+ op->byte_count, areq->nbytes, op->mode,
+ op->nbw, op->nwait, op->hash[0]);
+
+ if (areq->nbytes == 0)
+ return 0;
+
+ /* protect againt overflow */
+ if (areq->nbytes > UINT_MAX - op->nwait * 4 - op->nbw) {
+ dev_err(ss->dev, "Cannot process too large request\n");
+ return -EINVAL;
+ }
+
+ if (areq->nbytes + op->nwait * 4 + op->nbw < 64)
+ end = 0;
+ else
+ end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64
+ - op->nbw - op->nwait * 4;
+
+ if (end > areq->nbytes || areq->nbytes - end > 63) {
+ dev_err(ss->dev, "ERROR: Bound error %u %u\n",
+ end, areq->nbytes);
+ return -EINVAL;
+ }
+
+ if (end > 0) {
+ spin_lock_irqsave(&ss->slock, flags);
+
+ /*
+ * if some data have been processed before,
+ * we need to restore the partial hash state
+ */
+ if (op->byte_count > 0) {
+ ivmode = SS_IV_ARBITRARY;
+ for (i = 0; i < 5; i++)
+ writel(op->hash[i], ss->base + SS_IV0 + i * 4);
+ }
+ /* Enable the device */
+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
+ }
+
+ rx_cnt = 32;
+ i = 0;
+
+ if (op->nwait > 0 && end > 0) {
+ /*
+ * a precedent update was done
+ * No test versus rx_cnt since op->nwait cannot be more than 15
+ */
+ writesl(ss->base + SS_RXFIFO, op->wait, op->nwait);
+ op->byte_count += 4 * op->nwait;
+ op->nwait = 0;
+ }
+
+ in_sg = areq->src;
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
+ err = -EFAULT;
+ goto hash_update_release_ss;
+ }
+ do {
+ /*
+ * step 1, if some bytes remains from last SG,
+ * try to complete them to 4 and send that word
+ */
+ if (op->nbw > 0) {
+ while (op->nbw < 4 && i < areq->nbytes &&
+ in_i < in_sg->length) {
+ op->wb |= (*(u8 *)(src_addr + in_i))
+ << (8 * op->nbw);
+ dev_dbg(ss->dev, "%s: Complete w=%d wb=%x\n",
+ __func__, op->nbw, op->wb);
+ i++;
+ in_i++;
+ op->nbw++;
+ }
+ if (op->nbw == 4) {
+ if (i <= end) {
+ writel(op->wb, ss->base + SS_RXFIFO);
+ rx_cnt--;
+ if (rx_cnt > 0) {
+ spaces = readl_relaxed(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(spaces);
+ }
+ op->byte_count += 4;
+ } else {
+ op->wait[op->nwait] = op->wb;
+ op->nwait++;
+ dev_dbg(ss->dev, "%s: Keep %u bytes after %u\n",
+ __func__, op->nwait, end);
+ }
+ op->nbw = 0;
+ op->wb = 0;
+ }
+ }
+ /* step 2, main loop, read data 4bytes at a time */
+ while (i < areq->nbytes && in_i < in_sg->length) {
+ /* how many bytes we can read from current SG */
+ in_r = min(in_sg->length - in_i, areq->nbytes - i);
+ if (in_r < 4) {
+ /* Not enough data to write to the device */
+ op->wb = 0;
+ while (in_r > 0) {
+ op->wb |= (*(u8 *)(src_addr + in_i))
+ << (8 * op->nbw);
+ dev_dbg(ss->dev, "%s: ending bw=%d wb=%x\n",
+ __func__, op->nbw, op->wb);
+ in_r--;
+ i++;
+ in_i++;
+ op->nbw++;
+ }
+ goto nextsg;
+ }
+ v = *(u32 *)(src_addr + in_i);
+ if (i < end) {
+ todo = min3((u32)(end - i) / 4, rx_cnt, (u32)in_r / 4);
+ writesl(ss->base + SS_RXFIFO, src_addr + in_i, todo);
+ i += 4 * todo;
+ in_i += 4 * todo;
+ op->byte_count += 4 * todo;
+ rx_cnt -= todo;
+ if (rx_cnt == 0) {
+ spaces = readl_relaxed(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(spaces);
+ }
+ } else {
+ op->wait[op->nwait] = v;
+ i += 4;
+ in_i += 4;
+ op->nwait++;
+ dev_dbg(ss->dev, "%s: Keep word ww=%u after %u\n",
+ __func__, op->nwait, end);
+ if (op->nwait > 15) {
+ dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n");
+ err = -EIO;
+ goto hash_update_release_ss;
+ }
+ }
+ }
+nextsg:
+ /* Nothing more to read in this SG */
+ if (in_i == in_sg->length) {
+ kunmap(sg_page(in_sg));
+ do {
+ in_sg = sg_next(in_sg);
+ } while (in_sg != NULL && in_sg->length == 0);
+ in_i = 0;
+ if (in_sg != NULL) {
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
+ err = -EFAULT;
+ goto hash_update_release_ss;
+ }
+ }
+ }
+ } while (in_sg != NULL && i < areq->nbytes);
+
+hash_update_release_ss:
+ /* the device was not used, so nothing to release */
+ if (end == 0)
+ return err;
+
+ if (err == 0) {
+ /* ask the device to finish the hashing */
+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
+ i = 0;
+ do {
+ v = readl(ss->base + SS_CTL);
+ i++;
+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
+ if (i >= SS_TIMEOUT) {
+ dev_err(ss->dev, "ERROR: %s: hash end timeout after %d loop, CTL=%x\n",
+ __func__, i, v);
+ err = -EIO;
+ goto hash_update_release_ss;
+ /*
+ * this seems strange (to go backward)
+ * but since err is set, it works
+ * */
+ }
+
+ /* get the partial hash only if something was written */
+ if (op->mode == SS_OP_SHA1) {
+ for (i = 0; i < 5; i++)
+ op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
+ } else {
+ for (i = 0; i < 4; i++)
+ op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
+ }
+ }
+ writel(0, ss->base + SS_CTL);
+ spin_unlock_irqrestore(&ss->slock, flags);
+ return err;
+}
+
+/*
+ * sunxi_hash_final: finalize hashing operation
+ *
+ * If we have some remaining bytes, we write them.
+ * Then ask the SS for finalizing the hashing operation
+ *
+ * I do not check RX FIFO size in this function since the size is 32
+ * after each enabling and this function neither write more than 32 words.
+ */
+int sunxi_hash_final(struct ahash_request *areq)
+{
+ u32 v, ivmode = 0;
+ unsigned int i;
+ unsigned int j = 0;
+ int zeros;
+ unsigned int index, padlen;
+ __be64 bits;
+ struct sunxi_req_ctx *op = ahash_request_ctx(areq);
+ struct sunxi_ss_ctx *ss = op->ss;
+ u32 bf[32];
+ unsigned long flags;
+
+ dev_dbg(ss->dev, "%s: byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u",
+ __func__, op->byte_count, areq->nbytes, op->mode,
+ op->nbw, op->wb, op->hash[0], op->nwait);
+
+ spin_lock_irqsave(&ss->slock, flags);
+
+ /*
+ * if we have already writed something,
+ * restore the partial hash state
+ */
+ if (op->byte_count > 0) {
+ ivmode = SS_IV_ARBITRARY;
+ for (i = 0; i < 5; i++)
+ writel(op->hash[i], ss->base + SS_IV0 + i * 4);
+ }
+ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
+
+ /* write the remaining words of the wait buffer */
+ if (op->nwait > 0) {
+ writesl(ss->base + SS_RXFIFO, op->wait, op->nwait);
+ op->byte_count += 4 * op->nwait;
+ op->nwait = 0;
+ }
+
+ /* write the remaining bytes of the nbw buffer */
+ if (op->nbw > 0) {
+ op->wb |= ((1 << 7) << (op->nbw * 8));
+ bf[j++] = op->wb;
+ } else {
+ bf[j++] = 1 << 7;
+ }
+
+ /*
+ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
+ * I take the operations from other md5/sha1 implementations
+ */
+
+ /* we have already send 4 more byte of which nbw data */
+ if (op->mode == SS_OP_MD5) {
+ index = (op->byte_count + 4) & 0x3f;
+ op->byte_count += op->nbw;
+ if (index > 56)
+ zeros = (120 - index) / 4;
+ else
+ zeros = (56 - index) / 4;
+ } else {
+ op->byte_count += op->nbw;
+ index = op->byte_count & 0x3f;
+ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
+ zeros = (padlen - 1) / 4;
+ }
+
+ /*for (i = 0; i < zeros; i++)
+ bf[j++] = 0;*/
+ memset(bf + j, 0, 4 * zeros);
+ j += zeros;
+
+ /* write the length of data */
+ if (op->mode == SS_OP_SHA1) {
+ bits = cpu_to_be64(op->byte_count << 3);
+ bf[j++] = bits & 0xffffffff;
+ bf[j++] = (bits >> 32) & 0xffffffff;
+ } else {
+ bf[j++] = (op->byte_count << 3) & 0xffffffff;
+ bf[j++] = (op->byte_count >> 29) & 0xffffffff;
+ }
+ writesl(ss->base + SS_RXFIFO, bf, j);
+
+ /* Tell the SS to stop the hashing */
+ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
+
+ /*
+ * Wait for SS to finish the hash.
+ * The timeout could happend only in case of bad overcloking
+ * or driver bug.
+ */
+ i = 0;
+ do {
+ v = readl(ss->base + SS_CTL);
+ i++;
+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
+ if (i >= SS_TIMEOUT) {
+ dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
+ i, SS_TIMEOUT, v, areq->nbytes);
+ writel(0, ss->base + SS_CTL);
+ spin_unlock_irqrestore(&ss->slock, flags);
+ return -EIO;
+ }
+
+ /* Get the hash from the device */
+ if (op->mode == SS_OP_SHA1) {
+ for (i = 0; i < 5; i++) {
+ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
+ memcpy(areq->result + i * 4, &v, 4);
+ }
+ } else {
+ for (i = 0; i < 4; i++) {
+ v = readl(ss->base + SS_MD0 + i * 4);
+ memcpy(areq->result + i * 4, &v, 4);
+ }
+ }
+ writel(0, ss->base + SS_CTL);
+ spin_unlock_irqrestore(&ss->slock, flags);
+ return 0;
+}
+
+/* sunxi_hash_finup: finalize hashing operation after an update */
+int sunxi_hash_finup(struct ahash_request *areq)
+{
+ int err;
+
+ err = sunxi_hash_update(areq);
+ if (err != 0)
+ return err;
+
+ return sunxi_hash_final(areq);
+}
+
+/* combo of init/update/final functions */
+int sunxi_hash_digest(struct ahash_request *areq)
+{
+ int err;
+
+ err = sunxi_hash_init(areq);
+ if (err != 0)
+ return err;
+
+ err = sunxi_hash_update(areq);
+ if (err != 0)
+ return err;
+
+ return sunxi_hash_final(areq);
+}
diff --git a/drivers/crypto/sunxi-ss/sunxi-ss.h b/drivers/crypto/sunxi-ss/sunxi-ss.h
new file mode 100644
index 0000000..f10c1e4
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
@@ -0,0 +1,198 @@
+/*
+ * sunxi-ss.h - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2015 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ *
+ * You could find the datasheet in Documentation/arm/sunxi/README
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <crypto/scatterwalk.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <crypto/md5.h>
+#include <crypto/sha.h>
+#include <crypto/hash.h>
+#include <crypto/internal/hash.h>
+#include <crypto/aes.h>
+#include <crypto/des.h>
+#include <crypto/internal/rng.h>
+
+#define SS_CTL 0x00
+#define SS_KEY0 0x04
+#define SS_KEY1 0x08
+#define SS_KEY2 0x0C
+#define SS_KEY3 0x10
+#define SS_KEY4 0x14
+#define SS_KEY5 0x18
+#define SS_KEY6 0x1C
+#define SS_KEY7 0x20
+
+#define SS_IV0 0x24
+#define SS_IV1 0x28
+#define SS_IV2 0x2C
+#define SS_IV3 0x30
+
+#define SS_FCSR 0x44
+
+#define SS_MD0 0x4C
+#define SS_MD1 0x50
+#define SS_MD2 0x54
+#define SS_MD3 0x58
+#define SS_MD4 0x5C
+
+#define SS_RXFIFO 0x200
+#define SS_TXFIFO 0x204
+
+/* SS_CTL configuration values */
+
+/* PRNG generator mode - bit 15 */
+#define SS_PRNG_ONESHOT (0 << 15)
+#define SS_PRNG_CONTINUE (1 << 15)
+
+/* IV mode for hash */
+#define SS_IV_ARBITRARY (1 << 14)
+
+/* SS operation mode - bits 12-13 */
+#define SS_ECB (0 << 12)
+#define SS_CBC (1 << 12)
+#define SS_CTS (3 << 12)
+
+/* Counter width for CNT mode - bits 10-11 */
+#define SS_CNT_16BITS (0 << 10)
+#define SS_CNT_32BITS (1 << 10)
+#define SS_CNT_64BITS (2 << 10)
+
+/* Key size for AES - bits 8-9 */
+#define SS_AES_128BITS (0 << 8)
+#define SS_AES_192BITS (1 << 8)
+#define SS_AES_256BITS (2 << 8)
+
+/* Operation direction - bit 7 */
+#define SS_ENCRYPTION (0 << 7)
+#define SS_DECRYPTION (1 << 7)
+
+/* SS Method - bits 4-6 */
+#define SS_OP_AES (0 << 4)
+#define SS_OP_DES (1 << 4)
+#define SS_OP_3DES (2 << 4)
+#define SS_OP_SHA1 (3 << 4)
+#define SS_OP_MD5 (4 << 4)
+#define SS_OP_PRNG (5 << 4)
+
+/* Data end bit - bit 2 */
+#define SS_DATA_END (1 << 2)
+
+/* PRNG start bit - bit 1 */
+#define SS_PRNG_START (1 << 1)
+
+/* SS Enable bit - bit 0 */
+#define SS_DISABLED (0 << 0)
+#define SS_ENABLED (1 << 0)
+
+/* SS_FCSR configuration values */
+/* RX FIFO status - bit 30 */
+#define SS_RXFIFO_FREE (1 << 30)
+
+/* RX FIFO empty spaces - bits 24-29 */
+#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f)
+
+/* TX FIFO status - bit 22 */
+#define SS_TXFIFO_AVAILABLE (1 << 22)
+
+/* TX FIFO available spaces - bits 16-21 */
+#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f)
+
+#define SS_RXFIFO_EMP_INT_PENDING (1 << 10)
+#define SS_TXFIFO_AVA_INT_PENDING (1 << 8)
+#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
+#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
+
+
+struct sunxi_ss_ctx {
+ void __iomem *base;
+ int irq;
+ struct clk *busclk;
+ struct clk *ssclk;
+ struct device *dev;
+ struct resource *res;
+ spinlock_t slock; /* control the use of the device */
+};
+
+struct sunxi_ss_alg_template {
+ u32 type;
+ union {
+ struct crypto_alg crypto;
+ struct ahash_alg hash;
+ } alg;
+ struct sunxi_ss_ctx *ss;
+};
+
+struct sunxi_tfm_ctx {
+ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */
+ u32 keylen;
+ u32 keymode;
+ struct crypto_ablkcipher *fallback;
+ struct sunxi_ss_ctx *ss;
+};
+
+struct sunxi_req_ctx {
+ u32 mode;
+ u64 byte_count; /* number of bytes "uploaded" to the device */
+ /* wb: partial word waiting to be completed and written to the device */
+ u32 wb;
+ /* number of bytes to be uploaded in the wb word */
+ unsigned int nbw;
+ u32 hash[5]; /* for storing SS_IVx register */
+ u32 wait[64];
+ unsigned int nwait;
+ struct sunxi_ss_ctx *ss;
+};
+
+int sunxi_hash_crainit(struct crypto_tfm *tfm);
+int sunxi_hash_init(struct ahash_request *areq);
+int sunxi_hash_update(struct ahash_request *areq);
+int sunxi_hash_final(struct ahash_request *areq);
+int sunxi_hash_finup(struct ahash_request *areq);
+int sunxi_hash_digest(struct ahash_request *areq);
+int sunxi_hash_export(struct ahash_request *areq, void *out);
+int sunxi_hash_import(struct ahash_request *areq, const void *in);
+
+int sunxi_ss_cbc_aes_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_cbc_aes_decrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_aes_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_aes_decrypt(struct ablkcipher_request *areq);
+
+int sunxi_ss_cbc_des_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_cbc_des_decrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_des_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_des_decrypt(struct ablkcipher_request *areq);
+
+int sunxi_ss_cbc_des3_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_cbc_des3_decrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_des3_encrypt(struct ablkcipher_request *areq);
+int sunxi_ss_ecb_des3_decrypt(struct ablkcipher_request *areq);
+
+int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode);
+int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode);
+int sunxi_ss_cipher_init(struct crypto_tfm *tfm);
+int sunxi_ss_cipher_des_init(struct crypto_tfm *tfm);
+void sunxi_ss_cipher_exit(struct crypto_tfm *tfm);
+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen);
+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen);
+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen);
--
2.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
