Re: [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/21/14 21:11, Maxime Ripard wrote:
> Hi Corentin,
> 
> Thanks for resending it.
> 
> On Sun, Oct 19, 2014 at 04:16:22PM +0200, LABBE Corentin wrote:
>> Add support for the Security System included in Allwinner SoC A20.
>> The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms.
>>
>> Signed-off-by: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
>> ---
>>  drivers/crypto/Kconfig                    |  17 ++
>> +static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq)
>> +{
>> +	u32 spaces;
>> +	struct scatterlist *in_sg = areq->src;
>> +	struct scatterlist *out_sg = areq->dst;
>> +	void *src_addr;
>> +	void *dst_addr;
>> +	unsigned int ileft = areq->nbytes;
>> +	unsigned int oleft = areq->nbytes;
>> +	unsigned int todo;
>> +	u32 *src32;
>> +	u32 *dst32;
>> +	u32 rx_cnt = 32;
>> +	u32 tx_cnt = 0;
>> +	int i;
>> +
>> +	src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
> 
> Where does this scatter_list is coming from? Can it even be allocated
> in highmem?
> 

With AF_ALG and cryptodev, the SG is in highmem. Verified with some PageHighMem().

>> +	if (src_addr == NULL) {
>> +		dev_err(ss->dev, "kmap_atomic error for src SG\n");
>> +		writel(0, ss->base + SS_CTL);
>> +		mutex_unlock(&ss->lock);
>> +		return -EINVAL;
>> +	}
>> +
>> +	dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
>> +	if (dst_addr == NULL) {
>> +		dev_err(ss->dev, "kmap_atomic error for dst SG\n");
>> +		writel(0, ss->base + SS_CTL);
>> +		kunmap_atomic(src_addr);
>> +		mutex_unlock(&ss->lock);
>> +		return -EINVAL;
> 
> Please use gotos in your error path.
> 

Ok

>> +	}
>> +
>> +	src32 = (u32 *)src_addr;
>> +	dst32 = (u32 *)dst_addr;
>> +	ileft = areq->nbytes / 4;
>> +	oleft = areq->nbytes / 4;
>> +	i = 0;
>> +	do {
>> +		if (ileft > 0 && rx_cnt > 0) {
>> +			todo = min(rx_cnt, ileft);
>> +			ileft -= todo;
>> +			do {
>> +				writel_relaxed(*src32++,
> 
> Please put some braces around that referencing/increment.
> 

Ok

>> +						ss->base +
>> +						SS_RXFIFO);
>> +				todo--;
>> +			} while (todo > 0);
>> +		}
>> +		if (tx_cnt > 0) {
>> +			todo = min(tx_cnt, oleft);
>> +			oleft -= todo;
>> +			do {
>> +				*dst32++ = readl_relaxed(ss->base +
>> +						SS_TXFIFO);
>> +				todo--;
>> +			} while (todo > 0);
>> +		}
>> +		spaces = readl_relaxed(ss->base + SS_FCSR);
>> +		rx_cnt = SS_RXFIFO_SPACES(spaces);
>> +		tx_cnt = SS_TXFIFO_SPACES(spaces);
>> +	} while (oleft > 0);
>> +	writel(0, ss->base + SS_CTL);
>> +	kunmap_atomic(src_addr);
>> +	kunmap_atomic(dst_addr);
>> +	mutex_unlock(&ss->lock);
> 
> You never took that mutex in that function...
> 

Solved with comment from Vladimir Zapolskiy

>> +	return 0;
[]
>> +	int no_chunk = 1;
>> +	struct scatterlist *in_sg = areq->src;
>> +	struct scatterlist *out_sg = areq->dst;
>> +
>> +	/*
>> +	 * if we have only SGs with size multiple of 4,
>> +	 * we can use the SS AES function
>> +	 */
>> +	while (in_sg != NULL && no_chunk == 1) {
>> +		if ((in_sg->length % 4) != 0)
>> +			no_chunk = 0;
>> +		in_sg = sg_next(in_sg);
>> +	}
>> +	while (out_sg != NULL && no_chunk == 1) {
>> +		if ((out_sg->length % 4) != 0)
>> +			no_chunk = 0;
>> +		out_sg = sg_next(out_sg);
>> +	}
>> +
>> +	if (no_chunk == 1)
>> +		return sunxi_ss_aes_poll(areq, mode);
>> +
>> +	in_sg = areq->src;
>> +	out_sg = areq->dst;
>> +
>> +	nb_in_sg_rx = sg_nents(in_sg);
>> +	nb_in_sg_tx = sg_nents(out_sg);
>> +
>> +	/*
>> +	 * buf_in and buf_out are allocated only one time
>> +	 * then we keep the buffer until driver end
>> +	 * the allocation can only grow more
>> +	 * we do not reduce it for simplification
>> +	 */
>> +	mutex_lock(&ss->bufin_lock);
>> +	if (ss->buf_in == NULL) {
>> +		ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
>> +		ss->buf_in_size = areq->nbytes;
>> +	} else {
>> +		if (areq->nbytes > ss->buf_in_size) {
>> +			kfree(ss->buf_in);
>> +			ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
>> +			ss->buf_in_size = areq->nbytes;
>> +		}
>> +	}
>> +	if (ss->buf_in == NULL) {
>> +		ss->buf_in_size = 0;
>> +		mutex_unlock(&ss->bufin_lock);
>> +		dev_err(ss->dev, "Unable to allocate pages.\n");
>> +		return -ENOMEM;
>> +	}
>> +	mutex_lock(&ss->bufout_lock);
> 
> What are these two mutexes used for? It looks like you're only using
> them in this function.
> 
> What would prevent you from just using the "main" lock like you did
> for the AES?
> 

I have just removed all that DES/3DES code and now I use a fallback for that case.


>> +	if (ss->buf_out == NULL) {
>> +		ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
>> +		if (ss->buf_out == NULL) {
>> +			ss->buf_out_size = 0;
>> +			mutex_unlock(&ss->bufin_lock);
>> +			mutex_unlock(&ss->bufout_lock);
>> +			dev_err(ss->dev, "Unable to allocate pages.\n");
>> +			return -ENOMEM;
>> +		}
>> +		ss->buf_out_size = areq->nbytes;
>> +	} else {
>> +		if (areq->nbytes > ss->buf_out_size) {
>> +			kfree(ss->buf_out);
>> +			ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
>> +			if (ss->buf_out == NULL) {
>> +				ss->buf_out_size = 0;
>> +				mutex_unlock(&ss->bufin_lock);
>> +				mutex_unlock(&ss->bufout_lock);
>> +				dev_err(ss->dev, "Unable to allocate pages.\n");
>> +				return -ENOMEM;
>> +			}
>> +			ss->buf_out_size = areq->nbytes;
>> +		}
>> +	}
>> +
>> +	sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes);
>> +
>> +	ir = 0;
>> +	it = 0;
>> +	mutex_lock(&ss->lock);
>> +
>> +	for (i = 0; i < op->keylen; i += 4)
>> +		writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
>> +	if (areq->info != NULL) {
>> +		for (i = 0; i < 4 && i < ivsize / 4; i++) {
>> +			v = *(u32 *)(areq->info + i * 4);
>> +			writel(v, ss->base + SS_IV0 + i * 4);
>> +		}
>> +	}
>> +	writel(mode, ss->base + SS_CTL);
>> +
>> +	do {
>> +		if (rx_cnt == 0 || tx_cnt == 0) {
>> +			spaces = readl(ss->base + SS_FCSR);
>> +			rx_cnt = SS_RXFIFO_SPACES(spaces);
>> +			tx_cnt = SS_TXFIFO_SPACES(spaces);
>> +		}
>> +		if (rx_cnt > 0 && ir < areq->nbytes) {
>> +			do {
>> +				value = *(u32 *)(ss->buf_in + ir);
>> +				writel(value, ss->base + SS_RXFIFO);
>> +				ir += 4;
>> +				rx_cnt--;
>> +			} while (rx_cnt > 0 && ir < areq->nbytes);
>> +		}
>> +		if (tx_cnt > 0 && it < areq->nbytes) {
>> +			do {
>> +				value = readl(ss->base + SS_TXFIFO);
>> +				*(u32 *)(ss->buf_out + it) = value;
>> +				it += 4;
>> +				tx_cnt--;
>> +			} while (tx_cnt > 0 && it < areq->nbytes);
>> +		}
>> +		if (ir == areq->nbytes) {
>> +			mutex_unlock(&ss->bufin_lock);
> 
> If tx_cnt <= 0 and it < areq->nbytes, your loop will stop, and you'll
> not release the mutex.
> 

Solved with the cleaning

>> +			ir++;
>> +		}
>> +	} while (it < areq->nbytes);
>> +
>> +	writel(0, ss->base + SS_CTL);
>> +	mutex_unlock(&ss->lock);
>> +
>> +	/*
>> +	 * a simple optimization, since we dont need the hardware for this copy
>> +	 * we release the lock and do the copy. With that we gain 5/10% perf
>> +	 */
>> +	sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes);
>> +
>> +	mutex_unlock(&ss->bufout_lock);
>> +	return 0;
>> +}
>> +
>> +/* check and set the AES key, prepare the mode to be used */
>> +int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen)
>> +{
>> +	struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> +	switch (keylen) {
>> +	case 128 / 8:
>> +		op->keymode = SS_AES_128BITS;
>> +		break;
>> +	case 192 / 8:
>> +		op->keymode = SS_AES_192BITS;
>> +		break;
>> +	case 256 / 8:
>> +		op->keymode = SS_AES_256BITS;
>> +		break;
>> +	default:
>> +		dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen);
>> +		crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
>> +		return -EINVAL;
>> +	}
>> +	op->keylen = keylen;
>> +	memcpy(op->key, key, keylen);
>> +	return 0;
>> +}
>> +
>> +/* check and set the DES key, prepare the mode to be used */
>> +int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen)
>> +{
>> +	struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> +	if (keylen != DES_KEY_SIZE) {
>> +		dev_err(ss->dev, "Invalid keylen %u\n", keylen);
>> +		crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
>> +		return -EINVAL;
>> +	}
>> +	op->keylen = keylen;
>> +	memcpy(op->key, key, keylen);
>> +	return 0;
>> +}
>> +
>> +/* check and set the 3DES key, prepare the mode to be used */
>> +int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen)
>> +{
>> +	struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
>> +
>> +	if (keylen != 3 * DES_KEY_SIZE) {
>> +		dev_err(ss->dev, "Invalid keylen %u\n", keylen);
>> +		crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
>> +		return -EINVAL;
>> +	}
>> +	op->keylen = keylen;
>> +	memcpy(op->key, key, keylen);
>> +	return 0;
>> +}
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
>> new file mode 100644
>> index 0000000..e66d7e2
>> --- /dev/null
>> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
>> @@ -0,0 +1,318 @@
>> +/*
>> + * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC
>> + *
>> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
>> + *
>> + * Core file which registers crypto algorithms supported by the SS.
>> + *
>> + * You could find a link for the datasheet in Documentation/arm/sunxi/README
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#include <linux/clk.h>
>> +#include <linux/crypto.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <crypto/scatterwalk.h>
>> +#include <linux/scatterlist.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +
>> +#include "sunxi-ss.h"
>> +
>> +struct sunxi_ss_ctx *ss;
>> +
>> +/*
>> + * General notes for whole driver:
>> + *
>> + * After each request the device must be disabled with a write of 0 in SS_CTL
>> + *
>> + * For performance reason, we use writel_relaxed/read_relaxed for all
>> + * operations on RX and TX FIFO and also SS_FCSR.
>> + * Excepts for the last write on TX FIFO.
>> + * For all other registers, we use writel/readl.
>> + * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644
>> + * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640
>> + */
> 
> I don't really know why that comment is here, when there's not a
> single writel in this file.
> 

It is a note from the whole driver. I do not want to duplicate that comment in others files.
But now I use writesl() and that comment is now unnecessary.

>> +
>> +static struct ahash_alg sunxi_md5_alg = {
>> +	.init = sunxi_hash_init,
>> +	.update = sunxi_hash_update,
>> +	.final = sunxi_hash_final,
>> +	.finup = sunxi_hash_finup,
>> +	.digest = sunxi_hash_digest,
>> +	.halg = {
>> +		.digestsize = MD5_DIGEST_SIZE,
>> +		.base = {
>> +			.cra_name = "md5",
>> +			.cra_driver_name = "md5-sunxi-ss",
>> +			.cra_priority = 300,
>> +			.cra_alignmask = 3,
>> +			.cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
>> +			.cra_blocksize = MD5_HMAC_BLOCK_SIZE,
>> +			.cra_ctxsize = sizeof(struct sunxi_req_ctx),
>> +			.cra_module = THIS_MODULE,
>> +			.cra_type = &crypto_ahash_type,
>> +			.cra_init = sunxi_hash_crainit
>> +		}
>> +	}
>> +};
>> +
>> +static struct ahash_alg sunxi_sha1_alg = {
>> +	.init = sunxi_hash_init,
>> +	.update = sunxi_hash_update,
>> +	.final = sunxi_hash_final,
>> +	.finup = sunxi_hash_finup,
>> +	.digest = sunxi_hash_digest,
>> +	.halg = {
>> +		.digestsize = SHA1_DIGEST_SIZE,
>> +		.base = {
>> +			.cra_name = "sha1",
>> +			.cra_driver_name = "sha1-sunxi-ss",
>> +			.cra_priority = 300,
>> +			.cra_alignmask = 3,
>> +			.cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
>> +			.cra_blocksize = SHA1_BLOCK_SIZE,
>> +			.cra_ctxsize = sizeof(struct sunxi_req_ctx),
>> +			.cra_module = THIS_MODULE,
>> +			.cra_type = &crypto_ahash_type,
>> +			.cra_init = sunxi_hash_crainit
>> +		}
>> +	}
>> +};
>> +
>> +static struct crypto_alg sunxi_cipher_algs[] = {
>> +{
>> +	.cra_name = "cbc(aes)",
>> +	.cra_driver_name = "cbc-aes-sunxi-ss",
>> +	.cra_priority = 300,
>> +	.cra_blocksize = AES_BLOCK_SIZE,
>> +	.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
>> +	.cra_ctxsize = sizeof(struct sunxi_tfm_ctx),
>> +	.cra_module = THIS_MODULE,
>> +	.cra_alignmask = 3,
>> +	.cra_type = &crypto_ablkcipher_type,
>> +	.cra_init = sunxi_ss_cipher_init,
>> +	.cra_u = {
>> +		.ablkcipher = {
>> +			.min_keysize    = AES_MIN_KEY_SIZE,
>> +			.max_keysize    = AES_MAX_KEY_SIZE,
>> +			.ivsize         = AES_BLOCK_SIZE,
>> +			.setkey         = sunxi_ss_aes_setkey,
>> +			.encrypt        = sunxi_ss_cipher_encrypt,
>> +			.decrypt        = sunxi_ss_cipher_decrypt,
>> +		}
>> +	}
>> +}, {
>> +	.cra_name = "cbc(des)",
>> +	.cra_driver_name = "cbc-des-sunxi-ss",
>> +	.cra_priority = 300,
>> +	.cra_blocksize = DES_BLOCK_SIZE,
>> +	.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
>> +	.cra_ctxsize = sizeof(struct sunxi_req_ctx),
>> +	.cra_module = THIS_MODULE,
>> +	.cra_alignmask = 3,
>> +	.cra_type = &crypto_ablkcipher_type,
>> +	.cra_init = sunxi_ss_cipher_init,
>> +	.cra_u.ablkcipher = {
>> +		.min_keysize    = DES_KEY_SIZE,
>> +		.max_keysize    = DES_KEY_SIZE,
>> +		.ivsize         = DES_BLOCK_SIZE,
>> +		.setkey         = sunxi_ss_des_setkey,
>> +		.encrypt        = sunxi_ss_cipher_encrypt,
>> +		.decrypt        = sunxi_ss_cipher_decrypt,
>> +	}
>> +}, {
>> +	.cra_name = "cbc(des3_ede)",
>> +	.cra_driver_name = "cbc-des3-sunxi-ss",
>> +	.cra_priority = 300,
>> +	.cra_blocksize = DES3_EDE_BLOCK_SIZE,
>> +	.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
>> +	.cra_ctxsize = sizeof(struct sunxi_req_ctx),
>> +	.cra_module = THIS_MODULE,
>> +	.cra_alignmask = 3,
>> +	.cra_type = &crypto_ablkcipher_type,
>> +	.cra_init = sunxi_ss_cipher_init,
>> +	.cra_u.ablkcipher = {
>> +		.min_keysize    = DES3_EDE_KEY_SIZE,
>> +		.max_keysize    = DES3_EDE_KEY_SIZE,
>> +		.ivsize         = DES3_EDE_BLOCK_SIZE,
>> +		.setkey         = sunxi_ss_des3_setkey,
>> +		.encrypt        = sunxi_ss_cipher_encrypt,
>> +		.decrypt        = sunxi_ss_cipher_decrypt,
>> +	}
>> +}
>> +};
>> +
>> +static int sunxi_ss_probe(struct platform_device *pdev)
>> +{
>> +	struct resource *res;
>> +	u32 v;
>> +	int err;
>> +	unsigned long cr;
>> +	const unsigned long cr_ahb = 24 * 1000 * 1000;
>> +	const unsigned long cr_mod = 150 * 1000 * 1000;
>> +
>> +	if (!pdev->dev.of_node)
>> +		return -ENODEV;
>> +
>> +	ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
>> +	if (ss == NULL)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	ss->base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(ss->base)) {
>> +		dev_err(&pdev->dev, "Cannot request MMIO\n");
>> +		return PTR_ERR(ss->base);
>> +	}
>> +
>> +	ss->ssclk = devm_clk_get(&pdev->dev, "mod");
>> +	if (IS_ERR(ss->ssclk)) {
>> +		err = PTR_ERR(ss->ssclk);
>> +		dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
>> +		return err;
>> +	}
>> +	dev_dbg(&pdev->dev, "clock ss acquired\n");
>> +
>> +	ss->busclk = devm_clk_get(&pdev->dev, "ahb");
>> +	if (IS_ERR(ss->busclk)) {
>> +		err = PTR_ERR(ss->busclk);
>> +		dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
>> +		return err;
>> +	}
>> +	dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
>> +
>> +	/* Enable both clocks */
>> +	err = clk_prepare_enable(ss->busclk);
>> +	if (err != 0) {
>> +		dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
>> +		return err;
>> +	}
>> +	err = clk_prepare_enable(ss->ssclk);
>> +	if (err != 0) {
>> +		dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
>> +		clk_disable_unprepare(ss->busclk);
>> +		return err;
>> +	}
>> +
>> +	/*
>> +	 * Check that clock have the correct rates gived in the datasheet
>> +	 * Try to set the clock to the maximum allowed
>> +	 */
>> +	err = clk_set_rate(ss->ssclk, cr_mod);
>> +	if (err != 0) {
>> +		dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
>> +		clk_disable_unprepare(ss->ssclk);
>> +		clk_disable_unprepare(ss->busclk);
>> +		return err;
>> +	}
>> +
>> +	cr = clk_get_rate(ss->busclk);
>> +	if (cr >= cr_ahb)
>> +		dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
>> +				cr, cr / 1000000, cr_ahb);
>> +	else
>> +		dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
>> +				cr, cr / 1000000, cr_ahb);
>> +
>> +	cr = clk_get_rate(ss->ssclk);
>> +	if (cr <= cr_mod)
>> +		if (cr < cr_mod)
>> +			dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
>> +					cr, cr / 1000000, cr_mod);
>> +		else
>> +			dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
>> +					cr, cr / 1000000, cr_mod);
>> +	else
>> +		dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
>> +				cr, cr / 1000000, cr_mod);
> 
> If the set_rate fails, it will return an error. All this is useless.
> 

Ok

>> +
>> +	/*
>> +	 * Datasheet named it "Die Bonding ID"
>> +	 * I expect to be a sort of Security System Revision number.
>> +	 * Since the A80 seems to have an other version of SS
>> +	 * this info could be useful
>> +	 */
>> +	writel(SS_ENABLED, ss->base + SS_CTL);
>> +	v = readl(ss->base + SS_CTL);
>> +	v >>= 16;
>> +	v &= 0x07;
>> +	dev_info(&pdev->dev, "Die ID %d\n", v);
>> +	writel(0, ss->base + SS_CTL);
> 
> If the A80 has a different IP, it will most likely have a different
> compatible anyway. You can remove that code.
> 
>> +
>> +	ss->dev = &pdev->dev;
>> +
>> +	mutex_init(&ss->lock);
>> +	mutex_init(&ss->bufin_lock);
>> +	mutex_init(&ss->bufout_lock);
>> +
>> +	err = crypto_register_ahash(&sunxi_md5_alg);
>> +	if (err)
>> +		goto error_md5;
>> +	err = crypto_register_ahash(&sunxi_sha1_alg);
>> +	if (err)
>> +		goto error_sha1;
>> +	err = crypto_register_algs(sunxi_cipher_algs,
>> +			ARRAY_SIZE(sunxi_cipher_algs));
>> +	if (err)
>> +		goto error_ciphers;
>> +
>> +	return 0;
>> +error_ciphers:
>> +	crypto_unregister_ahash(&sunxi_sha1_alg);
>> +error_sha1:
>> +	crypto_unregister_ahash(&sunxi_md5_alg);
>> +error_md5:
>> +	clk_disable_unprepare(ss->ssclk);
>> +	clk_disable_unprepare(ss->busclk);
>> +	return err;
>> +}
>> +
>> +static int __exit sunxi_ss_remove(struct platform_device *pdev)
> 
> The remove callback should not be in the __exit section.
> 
> Here, that function will get removed if the driver is compiled as
> built-in the remove function will not even be in the kernel
> image. Which will result in an instant crash when the kernel will try
> to call this function (since it's not even there anymore).
> 

Ok

>> +{
>> +	if (!pdev->dev.of_node)
>> +		return 0;
>> +
>> +	crypto_unregister_ahash(&sunxi_md5_alg);
>> +	crypto_unregister_ahash(&sunxi_sha1_alg);
>> +	crypto_unregister_algs(sunxi_cipher_algs,
>> +			ARRAY_SIZE(sunxi_cipher_algs));
>> +
>> +	if (ss->buf_in != NULL)
>> +		kfree(ss->buf_in);
>> +	if (ss->buf_out != NULL)
>> +		kfree(ss->buf_out);
>> +
>> +	writel(0, ss->base + SS_CTL);
>> +	clk_disable_unprepare(ss->busclk);
>> +	clk_disable_unprepare(ss->ssclk);
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id a20ss_crypto_of_match_table[] = {
>> +	{ .compatible = "allwinner,sun7i-a20-crypto" },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
>> +
>> +static struct platform_driver sunxi_ss_driver = {
>> +	.probe          = sunxi_ss_probe,
>> +	.remove         = __exit_p(sunxi_ss_remove),
> 
> And this is why you're not seeing any warning.
> 
>> +	.driver         = {
>> +		.owner          = THIS_MODULE,
> 
> You can drop this, it's already set by module_platform_driver.
> 

Ok

>> +		.name           = "sunxi-ss",
>> +		.of_match_table	= a20ss_crypto_of_match_table,
>> +	},
>> +};
>> +
>> +module_platform_driver(sunxi_ss_driver);
>> +
>> +MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@xxxxxxxxx>");
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-hash.c b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
>> new file mode 100644
>> index 0000000..ec8758f
>> --- /dev/null
>> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
>> @@ -0,0 +1,445 @@
>> +/*
>> + * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
>> + *
>> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
>> + *
>> + * This file add support for MD5 and SHA1.
>> + *
>> + * You could find the datasheet in Documentation/arm/sunxi/README
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +#include "sunxi-ss.h"
>> +
>> +/* This is a totaly arbitrary value */
>> +#define SS_TIMEOUT 100
>> +
>> +extern struct sunxi_ss_ctx *ss;
>> +
>> +int sunxi_hash_crainit(struct crypto_tfm *tfm)
>> +{
>> +	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
>> +			sizeof(struct sunxi_req_ctx));
>> +	return 0;
>> +}
>> +
>> +/* sunxi_hash_init: initialize request context */
>> +int sunxi_hash_init(struct ahash_request *areq)
>> +{
>> +	const char *hash_type;
>> +	struct sunxi_req_ctx *op = ahash_request_ctx(areq);
>> +
>> +	memset(op, 0, sizeof(struct sunxi_req_ctx));
>> +
>> +	hash_type = crypto_tfm_alg_name(areq->base.tfm);
>> +
>> +	if (strcmp(hash_type, "sha1") == 0)
>> +		op->mode = SS_OP_SHA1;
>> +	if (strcmp(hash_type, "md5") == 0)
>> +		op->mode = SS_OP_MD5;
>> +	if (op->mode == 0)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>> +static u32 rx_cnt;
>> +
>> +inline void ss_writer(const u32 v)
>> +{
>> +	u32 spaces;
>> +
>> +	writel(v, ss->base + SS_RXFIFO);
>> +	rx_cnt--;
>> +	while (rx_cnt == 0) {
>> +		spaces = readl_relaxed(ss->base + SS_FCSR);
>> +		rx_cnt = SS_RXFIFO_SPACES(spaces);
>> +	}
>> +}
> 
> Errrr. What?!
> 
> Who sets that rx_cnt variable? And it persists between calls? It looks
> broken.
> 

rx_cnt was set at 0 at start of update/final functions.
I have found cleaner way so that code is removed.

>> +inline void ss_writer_relaxed(const u32 v)
>> +{
>> +	u32 spaces;
>> +
>> +	writel_relaxed(v, ss->base + SS_RXFIFO);
>> +	rx_cnt--;
>> +	while (rx_cnt == 0) {
>> +		spaces = readl_relaxed(ss->base + SS_FCSR);
>> +		rx_cnt = SS_RXFIFO_SPACES(spaces);
>> +	}
>> +}
>> +
>> +/*
>> + * sunxi_hash_update: update hash engine
>> + *
>> + * Could be used for both SHA1 and MD5
>> + * Write data by step of 32bits and put then in the SS.
>> + *
>> + * Since we cannot leave partial data and hash state in the engine,
>> + * we need to get the hash state at the end of this function.
>> + * After some work, I have found that we can get the hash state every 64o
>> + *
>> + * So the first work is to get the number of bytes to write to SS modulo 64
>> + * The extra bytes will go to two different destination:
>> + * op->wait for full 32bits word
>> + * op->wb (waiting bytes) for partial 32 bits word
>> + * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb
>> + *
>> + * So at the begin of update()
>> + * if op->nwait * 4 + areq->nbytes < 64
>> + * => all data writed to wait buffers and end=0
>> + * if not write all nwait to the device and position end to complete to 64o
>> + *
>> + * example 1:
>> + * update1 60o => nwait=15
>> + * update2 60o => need one more word to have 64o
>> + * end=4
>> + * so write all data in op->wait and one word of SGs
>> + * write remaining data in op->wait
>> + * final state op->nwait=14
>> + */
>> +int sunxi_hash_update(struct ahash_request *areq)
>> +{
>> +	u32 v, ivmode = 0;
>> +	unsigned int i = 0;
>> +	/*
>> +	 * i is the total bytes read from SGs, to be compared to areq->nbytes
>> +	 * i is important because we cannot rely on SG length since the sum of
>> +	 * SG->length could be greater than areq->nbytes
>> +	 */
>> +
>> +	struct sunxi_req_ctx *op = ahash_request_ctx(areq);
>> +	struct scatterlist *in_sg;
>> +	unsigned int in_i = 0; /* advancement in the current SG */
>> +	u64 end;
>> +	/*
>> +	 * end is the position when we need to stop writing to the device,
>> +	 * to be compared to i
>> +	 */
>> +	int in_r;
>> +	void *src_addr;
>> +
>> +	dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u",
>> +			__func__, crypto_tfm_alg_name(areq->base.tfm),
>> +			op->byte_count, areq->nbytes, op->mode,
>> +			op->nbw, op->nwait);
>> +
>> +	if (areq->nbytes == 0)
>> +		return 0;
>> +
>> +	end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64
>> +		- op->nbw - op->nwait * 4;
>> +
>> +	if (end > areq->nbytes || areq->nbytes - end > 63) {
>> +		dev_err(ss->dev, "ERROR: Bound error %llu %u\n",
>> +				end, areq->nbytes);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (op->nwait > 0 && end > 0) {
>> +		/* a precedent update was done */
>> +		for (i = 0; i < op->nwait; i++) {
>> +			ss_writer(op->wait[i]);
>> +			op->byte_count += 4;
>> +		}
>> +		op->nwait = 0;
>> +	}
>> +
>> +	mutex_lock(&ss->lock);
>> +	/*
>> +	 * if some data have been processed before,
>> +	 * we need to restore the partial hash state
>> +	 */
>> +	if (op->byte_count > 0) {
>> +		ivmode = SS_IV_ARBITRARY;
>> +		for (i = 0; i < 5; i++)
>> +			writel(op->hash[i], ss->base + SS_IV0 + i * 4);
>> +	}
>> +	/* Enable the device */
>> +	writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
>> +
>> +	rx_cnt = 0;
>> +	i = 0;
>> +
>> +	in_sg = areq->src;
>> +	src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
>> +	if (src_addr == NULL) {
>> +		mutex_unlock(&ss->lock);
>> +		dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
>> +		return -EFAULT;
>> +	}
>> +	do {
>> +		/*
>> +		 * step 1, if some bytes remains from last SG,
>> +		 * try to complete them to 4 and send that word
>> +		 */
>> +		if (op->nbw > 0) {
>> +			while (op->nbw < 4 && i < areq->nbytes &&
>> +					in_i < in_sg->length) {
>> +				op->wb |= (*(u8 *)(src_addr + in_i))
>> +					<< (8 * op->nbw);
>> +				dev_dbg(ss->dev, "%s Complete w=%d wb=%x\n",
>> +						__func__, op->nbw, op->wb);
>> +				i++;
>> +				in_i++;
>> +				op->nbw++;
>> +			}
>> +			if (op->nbw == 4) {
>> +				if (i <= end) {
>> +					ss_writer(op->wb);
>> +					op->byte_count += 4;
>> +				} else {
>> +					op->wait[op->nwait] = op->wb;
>> +					op->nwait++;
>> +					dev_dbg(ss->dev, "%s Keep %u bytes after %llu\n",
>> +						__func__, op->nwait, end);
>> +				}
>> +				op->nbw = 0;
>> +				op->wb = 0;
>> +			}
>> +		}
>> +		/* step 2, main loop, read data 4bytes at a time */
>> +		while (i < areq->nbytes && in_i < in_sg->length) {
>> +			/* how many bytes we can read, (we need 4) */
>> +			in_r = min(in_sg->length - in_i, areq->nbytes - i);
>> +			if (in_r < 4) {
>> +				/* Not enough data to write to the device */
>> +				op->wb = 0;
>> +				while (in_r > 0) {
>> +					op->wb |= (*(u8 *)(src_addr + in_i))
>> +						<< (8 * op->nbw);
>> +					dev_dbg(ss->dev, "%s ending bw=%d wb=%x\n",
>> +						__func__, op->nbw, op->wb);
>> +					in_r--;
>> +					i++;
>> +					in_i++;
>> +					op->nbw++;
>> +				}
>> +				goto nextsg;
>> +			}
>> +			v = *(u32 *)(src_addr + in_i);
>> +			if (i < end) {
>> +				/* last write must be done without relaxed */
>> +				if (i + 4 >= end)
>> +					ss_writer(v);
>> +				else
>> +					ss_writer_relaxed(v);
>> +				i += 4;
>> +				op->byte_count += 4;
>> +				in_i += 4;
>> +			} else {
>> +				op->wait[op->nwait] = v;
>> +				i += 4;
>> +				in_i += 4;
>> +				op->nwait++;
>> +				dev_dbg(ss->dev, "%s Keep word ww=%u after %llu\n",
>> +						__func__, op->nwait, end);
>> +				if (op->nwait > 15) {
>> +					dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n");
>> +					writel(0, ss->base + SS_CTL);
>> +					mutex_unlock(&ss->lock);
>> +					return -EIO;
>> +				}
>> +			}
>> +		}
>> +nextsg:
>> +		/* Nothing more to read in this SG */
>> +		if (in_i == in_sg->length) {
>> +			kunmap(sg_page(in_sg));
>> +			do {
>> +				in_sg = sg_next(in_sg);
>> +			} while (in_sg != NULL && in_sg->length == 0);
>> +			in_i = 0;
>> +			if (in_sg != NULL) {
>> +				src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
>> +				if (src_addr == NULL) {
>> +					mutex_unlock(&ss->lock);
>> +					dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
>> +					return -EFAULT;
>> +				}
>> +			}
>> +		}
>> +	} while (in_sg != NULL && i < areq->nbytes);
>> +
>> +	/* ask the device to finish the hashing */
>> +	writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
>> +	i = 0;
>> +	do {
>> +		v = readl(ss->base + SS_CTL);
>> +		i++;
>> +	} while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
>> +	if (i >= SS_TIMEOUT) {
>> +		dev_err(ss->dev, "ERROR: %s hash end timeout after %d loop, CTL=%x\n",
>> +				__func__, i, v);
>> +		writel(0, ss->base + SS_CTL);
>> +		mutex_unlock(&ss->lock);
>> +		return -EIO;
>> +	}
>> +
>> +	/* get the partial hash */
>> +	if (op->mode == SS_OP_SHA1) {
>> +		for (i = 0; i < 5; i++)
>> +			op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
>> +	} else {
>> +		for (i = 0; i < 4; i++)
>> +			op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
>> +	}
>> +
>> +	writel(0, ss->base + SS_CTL);
>> +	mutex_unlock(&ss->lock);
>> +	return 0;
>> +}
>> +
>> +/*
>> + * sunxi_hash_final: finalize hashing operation
>> + *
>> + * If we have some remaining bytes, we write them.
>> + * Then ask the SS for finalizing the hashing operation
>> + */
>> +int sunxi_hash_final(struct ahash_request *areq)
>> +{
>> +	u32 v, ivmode = 0;
>> +	unsigned int i;
>> +	int zeros;
>> +	unsigned int index, padlen;
>> +	__be64 bits;
>> +	struct sunxi_req_ctx *op = ahash_request_ctx(areq);
>> +
>> +	dev_dbg(ss->dev, "%s byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u",
>> +			__func__, op->byte_count, areq->nbytes, op->mode,
>> +			op->nbw, op->wb, op->hash[0], op->nwait);
>> +
>> +	mutex_lock(&ss->lock);
>> +	rx_cnt = 0;
>> +
>> +	/*
>> +	 * if we have already writed something,
>> +	 * restore the partial hash state
>> +	 */
>> +	if (op->byte_count > 0) {
>> +		ivmode = SS_IV_ARBITRARY;
>> +		for (i = 0; i < 5; i++)
>> +			writel(op->hash[i], ss->base + SS_IV0 + i * 4);
>> +	}
>> +	writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
>> +
>> +	/* write the remaining words of the wait buffer */
>> +	if (op->nwait > 0) {
>> +		for (i = 0; i < op->nwait; i++) {
>> +			v = op->wait[i];
>> +			ss_writer(v);
>> +			op->byte_count += 4;
>> +			dev_dbg(ss->dev, "%s write %llu i=%u %x\n",
>> +					__func__, op->byte_count, i, v);
>> +		}
>> +		op->nwait = 0;
>> +	}
>> +
>> +	/* write the remaining bytes of the nbw buffer */
>> +	if (op->nbw > 0) {
>> +		op->wb |= ((1 << 7) << (op->nbw * 8));
>> +		ss_writer(op->wb);
>> +	} else {
>> +		ss_writer((1 << 7));
>> +	}
>> +
>> +	/*
>> +	 * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
>> +	 * I take the operations from other md5/sha1 implementations
>> +	 */
>> +
>> +	/* we have already send 4 more byte of which nbw data */
>> +	if (op->mode == SS_OP_MD5) {
>> +		index = (op->byte_count + 4) & 0x3f;
>> +		op->byte_count += op->nbw;
>> +		if (index > 56)
>> +			zeros = (120 - index) / 4;
>> +		else
>> +			zeros = (56 - index) / 4;
>> +	} else {
>> +		op->byte_count += op->nbw;
>> +		index = op->byte_count & 0x3f;
>> +		padlen = (index < 56) ? (56 - index) : ((64+56) - index);
>> +		zeros = (padlen - 1) / 4;
>> +	}
>> +	for (i = 0; i < zeros; i++)
>> +		ss_writer(0);
>> +
>> +	/* write the length of data */
>> +	if (op->mode == SS_OP_SHA1) {
>> +		bits = cpu_to_be64(op->byte_count << 3);
>> +		ss_writer(bits & 0xffffffff);
>> +		ss_writer((bits >> 32) & 0xffffffff);
>> +	} else {
>> +		ss_writer((op->byte_count << 3) & 0xffffffff);
>> +		ss_writer((op->byte_count >> 29) & 0xffffffff);
>> +	}
>> +
>> +	/* Tell the SS to stop the hashing */
>> +	writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
>> +
>> +	/*
>> +	 * Wait for SS to finish the hash.
>> +	 * The timeout could happend only in case of bad overcloking
>> +	 * or driver bug.
>> +	 */
>> +	i = 0;
>> +	do {
>> +		v = readl(ss->base + SS_CTL);
>> +		i++;
>> +	} while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
>> +	if (i >= SS_TIMEOUT) {
>> +		dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
>> +				i, SS_TIMEOUT, v, areq->nbytes);
>> +		writel(0, ss->base + SS_CTL);
>> +		mutex_unlock(&ss->lock);
>> +		return -EIO;
>> +	}
>> +
>> +	/* Get the hash from the device */
>> +	if (op->mode == SS_OP_SHA1) {
>> +		for (i = 0; i < 5; i++) {
>> +			v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
>> +			memcpy(areq->result + i * 4, &v, 4);
>> +		}
>> +	} else {
>> +		for (i = 0; i < 4; i++) {
>> +			v = readl(ss->base + SS_MD0 + i * 4);
>> +			memcpy(areq->result + i * 4, &v, 4);
>> +		}
>> +	}
>> +	writel(0, ss->base + SS_CTL);
>> +	mutex_unlock(&ss->lock);
>> +	return 0;
>> +}
>> +
>> +/* sunxi_hash_finup: finalize hashing operation after an update */
>> +int sunxi_hash_finup(struct ahash_request *areq)
>> +{
>> +	int err;
>> +
>> +	err = sunxi_hash_update(areq);
>> +	if (err != 0)
>> +		return err;
>> +
>> +	return sunxi_hash_final(areq);
>> +}
>> +
>> +/* combo of init/update/final functions */
>> +int sunxi_hash_digest(struct ahash_request *areq)
>> +{
>> +	int err;
>> +
>> +	err = sunxi_hash_init(areq);
>> +	if (err != 0)
>> +		return err;
>> +
>> +	err = sunxi_hash_update(areq);
>> +	if (err != 0)
>> +		return err;
>> +
>> +	return sunxi_hash_final(areq);
>> +}
>> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss.h b/drivers/crypto/sunxi-ss/sunxi-ss.h
>> new file mode 100644
>> index 0000000..331e75b
>> --- /dev/null
>> +++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
>> @@ -0,0 +1,193 @@
>> +/*
>> + * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
>> + *
>> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
>> + *
>> + * Support AES cipher with 128,192,256 bits keysize.
>> + * Support MD5 and SHA1 hash algorithms.
>> + * Support DES and 3DES
>> + *
>> + * You could find the datasheet in Documentation/arm/sunxi/README
>> + *
>> + * Licensed under the GPL-2.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/crypto.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <crypto/scatterwalk.h>
>> +#include <linux/scatterlist.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <crypto/md5.h>
>> +#include <crypto/sha.h>
>> +#include <crypto/hash.h>
>> +#include <crypto/internal/hash.h>
>> +#include <crypto/aes.h>
>> +#include <crypto/des.h>
>> +#include <crypto/internal/rng.h>
>> +
>> +#define SS_CTL            0x00
>> +#define SS_KEY0           0x04
>> +#define SS_KEY1           0x08
>> +#define SS_KEY2           0x0C
>> +#define SS_KEY3           0x10
>> +#define SS_KEY4           0x14
>> +#define SS_KEY5           0x18
>> +#define SS_KEY6           0x1C
>> +#define SS_KEY7           0x20
>> +
>> +#define SS_IV0            0x24
>> +#define SS_IV1            0x28
>> +#define SS_IV2            0x2C
>> +#define SS_IV3            0x30
>> +
>> +#define SS_CNT0           0x34
>> +#define SS_CNT1           0x38
>> +#define SS_CNT2           0x3C
>> +#define SS_CNT3           0x40
>> +
>> +#define SS_FCSR           0x44
>> +#define SS_ICSR           0x48
>> +
>> +#define SS_MD0            0x4C
>> +#define SS_MD1            0x50
>> +#define SS_MD2            0x54
>> +#define SS_MD3            0x58
>> +#define SS_MD4            0x5C
>> +
>> +#define SS_RXFIFO         0x200
>> +#define SS_TXFIFO         0x204
>> +
>> +/* SS_CTL configuration values */
>> +
>> +/* PRNG generator mode - bit 15 */
>> +#define SS_PRNG_ONESHOT		(0 << 15)
>> +#define SS_PRNG_CONTINUE	(1 << 15)
>> +
>> +/* IV mode for hash */
>> +#define SS_IV_ARBITRARY		(1 << 14)
>> +
>> +/* SS operation mode - bits 12-13 */
>> +#define SS_ECB			(0 << 12)
>> +#define SS_CBC			(1 << 12)
>> +#define SS_CNT			(2 << 12)
>> +
>> +/* Counter width for CNT mode - bits 10-11 */
>> +#define SS_CNT_16BITS		(0 << 10)
>> +#define SS_CNT_32BITS		(1 << 10)
>> +#define SS_CNT_64BITS		(2 << 10)
>> +
>> +/* Key size for AES - bits 8-9 */
>> +#define SS_AES_128BITS		(0 << 8)
>> +#define SS_AES_192BITS		(1 << 8)
>> +#define SS_AES_256BITS		(2 << 8)
>> +
>> +/* Operation direction - bit 7 */
>> +#define SS_ENCRYPTION		(0 << 7)
>> +#define SS_DECRYPTION		(1 << 7)
>> +
>> +/* SS Method - bits 4-6 */
>> +#define SS_OP_AES		(0 << 4)
>> +#define SS_OP_DES		(1 << 4)
>> +#define SS_OP_3DES		(2 << 4)
>> +#define SS_OP_SHA1		(3 << 4)
>> +#define SS_OP_MD5		(4 << 4)
>> +#define SS_OP_PRNG		(5 << 4)
>> +
>> +/* Data end bit - bit 2 */
>> +#define SS_DATA_END		(1 << 2)
>> +
>> +/* PRNG start bit - bit 1 */
>> +#define SS_PRNG_START		(1 << 1)
>> +
>> +/* SS Enable bit - bit 0 */
>> +#define SS_DISABLED		(0 << 0)
>> +#define SS_ENABLED		(1 << 0)
>> +
>> +/* SS_FCSR configuration values */
>> +/* RX FIFO status - bit 30 */
>> +#define SS_RXFIFO_FREE		(1 << 30)
>> +
>> +/* RX FIFO empty spaces - bits 24-29 */
>> +#define SS_RXFIFO_SPACES(val)	(((val) >> 24) & 0x3f)
>> +
>> +/* TX FIFO status - bit 22 */
>> +#define SS_TXFIFO_AVAILABLE	(1 << 22)
>> +
>> +/* TX FIFO available spaces - bits 16-21 */
>> +#define SS_TXFIFO_SPACES(val)	(((val) >> 16) & 0x3f)
>> +
>> +#define SS_RXFIFO_EMP_INT_PENDING	(1 << 10)
>> +#define SS_TXFIFO_AVA_INT_PENDING	(1 << 8)
>> +#define SS_RXFIFO_EMP_INT_ENABLE	(1 << 2)
>> +#define SS_TXFIFO_AVA_INT_ENABLE	(1 << 0)
>> +
>> +/* SS_ICSR configuration values */
>> +#define SS_ICS_DRQ_ENABLE		(1 << 4)
>> +
>> +struct sunxi_ss_ctx {
>> +	void __iomem *base;
>> +	int irq;
>> +	struct clk *busclk;
>> +	struct clk *ssclk;
>> +	struct device *dev;
>> +	struct resource *res;
>> +	void *buf_in; /* pointer to data to be uploaded to the device */
>> +	size_t buf_in_size; /* size of buf_in */
>> +	void *buf_out;
>> +	size_t buf_out_size;
>> +	struct mutex lock; /* control the use of the device */
>> +	struct mutex bufout_lock; /* control the use of buf_out*/
>> +	struct mutex bufin_lock; /* control the sue of buf_in*/
>> +};
>> +
>> +struct sunxi_tfm_ctx {
>> +	u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */
>> +	u32 keylen;
>> +	u32 keymode;
>> +};
>> +
>> +struct sunxi_req_ctx {
>> +	u32 mode;
>> +	u64 byte_count; /* number of bytes "uploaded" to the device */
>> +	u32 wb; /* a partial word waiting to be completed and
>> +			uploaded to the device */
>> +	/* number of bytes to be uploaded in the wb word */
>> +	unsigned int nbw;
>> +	u32 hash[5];
>> +	u32 wait[64];
>> +	unsigned int nwait;
>> +};
>> +
>> +#define SS_SEED_LEN (192/8)
>> +#define SS_DATA_LEN (160/8)
>> +
>> +struct prng_context {
>> +	u32 seed[SS_SEED_LEN/4];
>> +	unsigned int slen;
>> +};
>> +
>> +int sunxi_hash_crainit(struct crypto_tfm *tfm);
>> +int sunxi_hash_init(struct ahash_request *areq);
>> +int sunxi_hash_update(struct ahash_request *areq);
>> +int sunxi_hash_final(struct ahash_request *areq);
>> +int sunxi_hash_finup(struct ahash_request *areq);
>> +int sunxi_hash_digest(struct ahash_request *areq);
>> +int sunxi_hash_export(struct ahash_request *areq, void *out);
>> +int sunxi_hash_import(struct ahash_request *areq, const void *in);
>> +
>> +int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode);
>> +int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode);
>> +int sunxi_ss_cipher_init(struct crypto_tfm *tfm);
>> +int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq);
>> +int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq);
>> +int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen);
>> +int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen);
>> +int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
>> +		unsigned int keylen);
>> -- 
>> 2.0.4
>>
> 
> Thanks,
> Maxime
> 

Thanks for your review and time.

Corentin

--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux