On Thu, Apr 03, 2014 at 06:18:00PM +0200, Stanimir Varbanov wrote:
> This adds dmaengine and sg-list helper functions used by
> other parts of the crypto driver.
>
> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> ---
> drivers/crypto/qce/dma.c | 201 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/crypto/qce/dma.h | 57 ++++++++++++++
> 2 files changed, 258 insertions(+)
> create mode 100644 drivers/crypto/qce/dma.c
> create mode 100644 drivers/crypto/qce/dma.h
More nitpicking, because everyone loves that....
>
> diff --git a/drivers/crypto/qce/dma.c b/drivers/crypto/qce/dma.c
> new file mode 100644
> index 000000000000..1bad958db2f9
> --- /dev/null
> +++ b/drivers/crypto/qce/dma.c
> @@ -0,0 +1,201 @@
[...]
> +int qce_dma_request(struct device *dev, struct qce_dma_data *dma)
> +{
> + unsigned int memsize;
> + void *va;
> + int ret;
> +
> + dma->txchan = dma_request_slave_channel_reason(dev, "tx");
> + if (IS_ERR(dma->txchan)) {
> + ret = PTR_ERR(dma->txchan);
> + return ret;
You can just return PTR_ERR(dma->txchan) here, no need to set 'ret'.
> + }
> +
> + dma->rxchan = dma_request_slave_channel_reason(dev, "rx");
> + if (IS_ERR(dma->rxchan)) {
> + ret = PTR_ERR(dma->rxchan);
> + goto error_rx;
> + }
> +
> + memsize = QCE_RESULT_BUF_SZ + QCE_IGNORE_BUF_SZ;
> + va = kzalloc(memsize, GFP_KERNEL);
'memsize' is only used here. Just pass 'QCE_RESULT_BUF_SZ +
QCE_IGNORE_BUF_SZ' directly to kzalloc().
Additionally, is there some particular reason why we need to zero this
memory?
> + if (!va) {
> + ret = -ENOMEM;
> + goto error_nomem;
> + }
> +
> + dma->result_buf = va;
Is there some requirement that we don't set dma->result_buf on error?
If not, we can discard the 'va' variable as well.
> + dma->ignore_buf = dma->result_buf + QCE_RESULT_BUF_SZ;
> +
> + return 0;
> +error_nomem:
> + if (!IS_ERR(dma->rxchan))
> + dma_release_channel(dma->rxchan);
> +error_rx:
> + if (!IS_ERR(dma->txchan))
> + dma_release_channel(dma->txchan);
> + return ret;
> +}
> +
> +void qce_dma_release(struct qce_dma_data *dma)
> +{
> + dma_release_channel(dma->txchan);
> + dma_release_channel(dma->rxchan);
> + kfree(dma->result_buf);
> +}
> +
> +int qce_mapsg(struct device *dev, struct scatterlist *sg, unsigned int nents,
> + enum dma_data_direction dir, bool chained)
> +{
> + int err;
> +
> + if (chained) {
> + while (sg) {
> + err = dma_map_sg(dev, sg, 1, dir);
> + if (!err)
> + goto error;
> + sg = scatterwalk_sg_next(sg);
> + }
> + } else {
> + err = dma_map_sg(dev, sg, nents, dir);
> + if (!err)
> + goto error;
> + }
> +
> + return nents;
> +error:
> + return -EFAULT;
No need for this label, as there's no cleanup. Just return
-EFAULT directly on error.
> +}
[...]
> +struct scatterlist *
> +qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl)
> +{
> + struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
> +
> + while (sg) {
> + if (!sg_page(sg))
> + break;
> + sg = sg_next(sg);
> + }
> +
> + if (!sg)
> + goto error;
> +
> + while (new_sgl && sg) {
> + sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
> + new_sgl->offset);
> + sg_last = sg;
> + sg = sg_next(sg);
> + new_sgl = sg_next(new_sgl);
> + }
> +
> + if (new_sgl)
> + goto error;
> +
> + return sg_last;
> +error:
> + return ERR_PTR(-EINVAL);
No need for this label, as there's no cleanup. Just return
ERR_PTR(-EINVAL) directly on error.
> +}
> +
> +static int qce_dma_prep_sg(struct dma_chan *chan, struct scatterlist *sg,
> + int nents, unsigned long flags,
> + enum dma_transfer_direction dir,
> + dma_async_tx_callback cb, void *cb_param)
> +{
> + struct dma_async_tx_descriptor *desc;
> +
> + if (!sg || !nents)
> + return -EINVAL;
> +
> + desc = dmaengine_prep_slave_sg(chan, sg, nents, dir, flags);
> + if (!desc)
> + return -EINVAL;
> +
> + desc->callback = cb;
> + desc->callback_param = cb_param;
> + dmaengine_submit(desc);
Do we not care if there is an error here?
dma_cookie_t cookie;
...
cookie = dmaengine_submit(desc);
return dma_submit_error(cookie);
> + return 0;
> +}
[...]
> diff --git a/drivers/crypto/qce/dma.h b/drivers/crypto/qce/dma.h
> new file mode 100644
> index 000000000000..932b02fd8f25
> --- /dev/null
> +++ b/drivers/crypto/qce/dma.h
> @@ -0,0 +1,57 @@
> +/*
> + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _DMA_H_
> +#define _DMA_H_
> +
> +#define QCE_AUTHIV_REGS_CNT 16
> +#define QCE_AUTH_BYTECOUNT_REGS_CNT 4
> +#define QCE_CNTRIV_REGS_CNT 4
> +
> +/* result dump format */
> +struct qce_result_dump {
> + u32 auth_iv[QCE_AUTHIV_REGS_CNT];
> + u32 auth_byte_count[QCE_AUTH_BYTECOUNT_REGS_CNT];
> + u32 encr_cntr_iv[QCE_CNTRIV_REGS_CNT];
> + u32 status;
> + u32 status2;
> +};
> +
> +#define QCE_IGNORE_BUF_SZ (2 * QCE_BAM_BURST_SIZE)
QCE_BAM_BURST_SIZE is defined in common.h in 6/9. Either that file
needs to be included from this one, or the definition needs to be moved.
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
