Hi Naveen,
On 09.01.2014 05:59, Naveen Krishna Chatradhi wrote:
This patch adds device tree support to the s5p-sss.c crypto driver.
Implements a varient struct to address the changes in SSS hardware
on various SoCs from Samsung.
Also, Documentation under devicetree/bindings added.
Signed-off-by: Naveen Krishna Ch <ch.naveen@xxxxxxxxxxx>
CC: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
CC: David S. Miller <davem@xxxxxxxxxxxxx>
CC: Vladimir Zapolskiy <vzapolskiy@xxxxxxxxx>
TO: <linux-crypto@xxxxxxxxxxxxxxx>
CC: <linux-samsung-soc@xxxxxxxxxxxxxxx>
---
Changes since v1:
1. Added description of the SSS module in Documentation
2. Corrected the interrupts description
3. Added varient struct instead of the version variable
.../devicetree/bindings/crypto/samsung-sss.txt | 20 +++++
drivers/crypto/s5p-sss.c | 81 ++++++++++++++++++--
2 files changed, 95 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/samsung-sss.txt
diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.txt b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
new file mode 100644
index 0000000..0e45b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
@@ -0,0 +1,20 @@
+Samsung SoC SSS (Security SubSystem) module
+
+The SSS module in S5PV210 SoC supports the following:
+-- Feeder (FeedCtrl)
+-- Advanced Encryption Standard (AES)
+-- Data Encryption Standard (DES)/3DES
+-- Public Key Accelerator (PKA)
+-- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
+-- PRNG: Pseudo Random Number Generator
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+ SSS versions:
+ - "samsung,s5p-secss" for S5PV210 SoC.
As I wrote in my previous reply, please use specific compatible string
containing name of SoC on which the block described by it appeared
first. Let me say it again, for security block that showed up first on
S5PV210 the string will be "samsung,s5pv210-secss".
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SSS module.
+ Two interrupts "feed control and hash" in case of S5PV210
+- clocks : the required gating clock for the SSS module.
+- clock-names : the gating clock name to be requested in the SSS driver.
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index 93cddeb..78e0c37 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -22,6 +22,7 @@
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/crypto.h>
#include <linux/interrupt.h>
@@ -145,6 +146,20 @@
#define AES_KEY_LEN 16
#define CRYPTO_QUEUE_LEN 1
+/**
+ * struct samsung_aes_varient - platform specific SSS driver data
typo: s/varient/variant/g
Anyway, I think this should be moved to the patch adding support for
Exynos5, as before it there is no use for this struct and it's not
directly related to DT support.
+ * @has_hash_irq: true if SSS module uses hash interrupt, false otherwise
+ * @aes_offset: AES register offset from SSS module's base.
+ *
+ * Specifies platform specific configuration of SSS module.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct samsung_aes_varient {
+ bool has_hash_irq;
+ unsigned int aes_offset;
+};
+
struct s5p_aes_reqctx {
unsigned long mode;
};
@@ -173,10 +188,56 @@ struct s5p_aes_dev {
struct crypto_queue queue;
bool busy;
spinlock_t lock;
+
+ struct samsung_aes_varient *varient;
};
static struct s5p_aes_dev *s5p_dev;
+static struct samsung_aes_varient s5p_aes_data = {
Remember to mark constant data as const.
+ .has_hash_irq = true,
+ .aes_offset = 0x4000,
+};
+
+static const struct platform_device_id s5p_sss_ids[] = {
+ {
+ .name = "s5p-secss",
+ .driver_data = (kernel_ulong_t)&s5p_aes_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s5p_sss_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s5p_sss_dt_match[] = {
+ {
+ .compatible = "samsung,s5p-secss",
+ .data = (void *)&s5p_aes_data,
No need to cast pointers to (void *) explicitly.
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, s5p_sss_dt_match);
+#else
+static struct of_device_id s5p_sss_dt_match[] = {
+ { },
+};
Hmm, I don't think there is any need for this.
+#endif
+
+static inline struct samsung_aes_varient *find_s5p_sss_version
+ (struct platform_device *pdev)
+{
+ if (IS_ENABLED(CONFIG_OF)) {
+ if (pdev->dev.of_node) {
What about using a single if, as follows:
if (IS_ENABLED(CONFIG_IF) && pdev->dev.of_node)
+ const struct of_device_id *match;
+ match = of_match_node(s5p_sss_dt_match,
You can use of_match_ptr(s5p_sss_dt_match) instead of referring to the
table directly to eliminate the need for empty table.
+ pdev->dev.of_node);
+ return (struct samsung_aes_varient *)match->data;
+ }
+ }
+ return (struct samsung_aes_varient *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
@@ -564,6 +625,7 @@ static int s5p_aes_probe(struct platform_device *pdev)
struct s5p_aes_dev *pdata;
struct device *dev = &pdev->dev;
struct resource *res;
+ struct samsung_aes_varient *varient;
if (s5p_dev)
return -EEXIST;
@@ -580,6 +642,8 @@ static int s5p_aes_probe(struct platform_device *pdev)
resource_size(res), pdev->name))
return -EBUSY;
+ varient = find_s5p_sss_version(pdev);
+
pdata->clk = devm_clk_get(dev, "secss");
if (IS_ERR(pdata->clk)) {
dev_err(dev, "failed to find secss clock source\n");
@@ -606,18 +670,21 @@ static int s5p_aes_probe(struct platform_device *pdev)
}
The if (variant->has_hash_irq) should start here and cover the whole
block handling second interrupt. This should be more readable.
pdata->irq_hash = platform_get_irq(pdev, 1);
- if (pdata->irq_hash < 0) {
+ if (varient->has_hash_irq && pdata->irq_hash < 0) {
err = pdata->irq_hash;
dev_warn(dev, "hash interrupt is not available.\n");
goto err_irq;
}
- err = devm_request_irq(dev, pdata->irq_hash, s5p_aes_interrupt,
- IRQF_SHARED, pdev->name, pdev);
- if (err < 0) {
- dev_warn(dev, "hash interrupt is not available.\n");
- goto err_irq;
+ if (varient->has_hash_irq) {
+ err = devm_request_irq(dev, pdata->irq_hash, s5p_aes_interrupt,
+ IRQF_SHARED, pdev->name, pdev);
+ if (err < 0) {
+ dev_warn(dev, "hash interrupt is not available.\n");
+ goto err_irq;
+ }
}
+ pdata->varient = varient;
pdata->dev = dev;
platform_set_drvdata(pdev, pdata);
s5p_dev = pdata;
@@ -674,9 +741,11 @@ static int s5p_aes_remove(struct platform_device *pdev)
static struct platform_driver s5p_aes_crypto = {
.probe = s5p_aes_probe,
.remove = s5p_aes_remove,
+ .id_table = s5p_sss_ids,
.driver = {
.owner = THIS_MODULE,
.name = "s5p-secss",
+ .of_match_table = s5p_sss_dt_match,
.of_match_table = of_match_ptr(s5p_sss_dt_match),
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html