Hi,
Marek Vasut writes:
> Enable the DCP by default on both i.MX23 and i.MX28.
>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
> Cc: David S. Miller <davem@xxxxxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
> To: linux-crypto@xxxxxxxxxxxxxxx
> ---
> arch/arm/boot/dts/imx23.dtsi | 4 +++-
> arch/arm/boot/dts/imx28.dtsi | 5 +++--
> 2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
> index 87faa6e..0630a9a 100644
> --- a/arch/arm/boot/dts/imx23.dtsi
> +++ b/arch/arm/boot/dts/imx23.dtsi
> @@ -337,8 +337,10 @@
> };
>
> dcp@80028000 {
> + compatible = "fsl,mxs-dcp";
> reg = <0x80028000 0x2000>;
> - status = "disabled";
> + interrupts = <53 54>;
> + status = "okay";
> };
AFAICT the policy seems to be that nodes, that are always enabled
don't get a 'status' property at all.
> pxp@8002a000 {
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 918d419..8b5ad60 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -782,9 +782,10 @@
> };
>
> dcp: dcp@80028000 {
> + compatible = "fsl,mxs-dcp";
> reg = <0x80028000 0x2000>;
> - interrupts = <52 53 54>;
> - compatible = "fsl-dcp";
>
What about drivers/crypto/dcp.c that is currently using this property?
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
