On Thu, 16 May 2013, Vinod Koul wrote:
> On Wed, May 15, 2013 at 10:51:57AM +0100, Lee Jones wrote:
> > When a DMA client requests and configures a DMA channel, it requests
> > data_width in Bytes. The DMA40 driver then swiftly converts it over to
> > the necessary register bit value. Unfortunately, for any subsequent
> > calculations we have to shift '1' by the bit pattern (1 << data_width)
> > times to make any sense of it.
> >
> > This patch flips the semantics on its head and only converts the value
> > to its respective register bit pattern when writing to registers. This
> > way we can use the true data_width (in Bytes) value.
> >
> > Cc: Vinod Koul <vinod.koul@xxxxxxxxx>
> > Cc: Dan Williams <djbw@xxxxxx>
> > Cc: Per Forlin <per.forlin@xxxxxxxxxxxxxx>
> > Cc: Rabin Vincent <rabin@xxxxxx>
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > ---
>
> > @@ -2804,14 +2781,24 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> > src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
> > }
> >
> > + /* Only valid widths are; 1, 2, 4 and 8. */
> > + if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
> > + src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
> > + dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
> > + dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
> > + ((src_addr_width > 1) && (src_addr_width & 1)) ||
> > + ((dst_addr_width > 1) && (dst_addr_width & 1)))
> > + return -EINVAL;
> how about a simple macro to check above..
I thought about it, but as this code appears only once, I considered
it to be unnecessary abstraction.
> > +
> > + cfg->src_info.data_width = src_addr_width;
> > + cfg->dst_info.data_width = dst_addr_width;
> > +
> > ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
> > - src_addr_width,
> > src_maxburst);
> > if (ret)
> > return ret;
> >
> > ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
> > - dst_addr_width,
> > dst_maxburst);
> > if (ret)
> > return ret;
> > diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> > index 5ddd724..a035dfe 100644
> > --- a/drivers/dma/ste_dma40_ll.c
> > +++ b/drivers/dma/ste_dma40_ll.c
> > @@ -10,6 +10,18 @@
> >
> > #include "ste_dma40_ll.h"
> >
> > +u8 d40_width_to_bits(enum dma_slave_buswidth width)
> > +{
> > + if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
> > + return STEDMA40_ESIZE_8_BIT;
> > + else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
> > + return STEDMA40_ESIZE_16_BIT;
> > + else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES)
> > + return STEDMA40_ESIZE_64_BIT;
> > + else
> > + return STEDMA40_ESIZE_32_BIT;
> > +}
> > +
> Switch looks better for this and how about
> return fls(width);
>
> as your defines are 0...3 and dmaengine define 1,2,..8 for same thing
> then you can also get rid of STEDMA40_XXX_WIDTH macros!
I like it.
Will you let me do it as a follow-up patch?
> > @@ -70,13 +70,6 @@ enum stedma40_flow_ctrl {
> > STEDMA40_FLOW_CTRL,
> > };
> >
> > -enum stedma40_periph_data_width {
> > - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
> > - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
> > - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
> > - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
> > -};
> nice
>
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
