Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 15, 2013 at 10:51:54AM +0100, Lee Jones wrote:
> STEDMA40_*_TO_* direction definitions are identical in all but name to
> the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not
> duplicating such things.
> 
> Cc: Vinod Koul <vinod.koul@xxxxxxxxx>
> Cc: Dan Williams <djbw@xxxxxx>
> Cc: Per Forlin <per.forlin@xxxxxxxxxxxxxx>
> Cc: Rabin Vincent <rabin@xxxxxx>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Nice :)

1) I dont see the STE macro getting removed, why do we need it
2) last i checked the direction values had a bit idfference b/w what you are
using and what dmaengine defines, so hopefully that is taken care of..

--
~Vinod
> ---
>  drivers/dma/ste_dma40.c    |   56 ++++++++++++++++++++++----------------------
>  drivers/dma/ste_dma40_ll.c |   24 +++++++++----------
>  2 files changed, 40 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 08bc58a..483da16 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = {
>  /* Default configuration for physcial memcpy */
>  struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
>  	.mode = STEDMA40_MODE_PHYSICAL,
> -	.dir = STEDMA40_MEM_TO_MEM,
> +	.dir = DMA_MEM_TO_MEM,
>  
>  	.src_info.data_width = STEDMA40_BYTE_WIDTH,
>  	.src_info.psize = STEDMA40_PSIZE_PHY_1,
> @@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
>  /* Default configuration for logical memcpy */
>  struct stedma40_chan_cfg dma40_memcpy_conf_log = {
>  	.mode = STEDMA40_MODE_LOGICAL,
> -	.dir = STEDMA40_MEM_TO_MEM,
> +	.dir = DMA_MEM_TO_MEM,
>  
>  	.src_info.data_width = STEDMA40_BYTE_WIDTH,
>  	.src_info.psize = STEDMA40_PSIZE_LOG_1,
> @@ -843,7 +843,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
>  		 * that uses linked lists.
>  		 */
>  		if (!(chan->phy_chan->use_soft_lli &&
> -			chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM))
> +			chan->dma_cfg.dir == DMA_DEV_TO_MEM))
>  			curr_lcla = d40_lcla_alloc_one(chan, desc);
>  
>  		first_lcla = curr_lcla;
> @@ -1311,12 +1311,12 @@ static void d40_config_set_event(struct d40_chan *d40c,
>  	u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
>  
>  	/* Enable event line connected to device (or memcpy) */
> -	if ((d40c->dma_cfg.dir ==  STEDMA40_PERIPH_TO_MEM) ||
> -	    (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> +	if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
> +	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
>  		__d40_config_set_event(d40c, event_type, event,
>  				       D40_CHAN_REG_SSLNK);
>  
> -	if (d40c->dma_cfg.dir !=  STEDMA40_PERIPH_TO_MEM)
> +	if (d40c->dma_cfg.dir !=  DMA_DEV_TO_MEM)
>  		__d40_config_set_event(d40c, event_type, event,
>  				       D40_CHAN_REG_SDLNK);
>  }
> @@ -1774,7 +1774,7 @@ static int d40_validate_conf(struct d40_chan *d40c,
>  		res = -EINVAL;
>  	}
>  
> -	if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) {
> +	if (conf->dir == DMA_DEV_TO_DEV) {
>  		/*
>  		 * DMAC HW supports it. Will be added to this driver,
>  		 * in case any dma client requires it.
> @@ -1905,11 +1905,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
>  	phys = d40c->base->phy_res;
>  	num_phy_chans = d40c->base->num_phy_chans;
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> +	if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
>  		log_num = 2 * dev_type;
>  		is_src = true;
> -	} else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -		   d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> +	} else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> +		   d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
>  		/* dst event lines are used for logical memcpy */
>  		log_num = 2 * dev_type + 1;
>  		is_src = false;
> @@ -1920,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
>  	event_line = D40_TYPE_TO_EVENT(dev_type);
>  
>  	if (!is_log) {
> -		if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> +		if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
>  			/* Find physical half channel */
>  			if (d40c->dma_cfg.use_fixed_channel) {
>  				i = d40c->dma_cfg.phy_channel;
> @@ -2068,10 +2068,10 @@ static int d40_free_dma(struct d40_chan *d40c)
>  		return -EINVAL;
>  	}
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
> +	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> +	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
>  		is_src = false;
> -	else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
> +	else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
>  		is_src = true;
>  	else {
>  		chan_err(d40c, "Unknown direction\n");
> @@ -2133,10 +2133,10 @@ static bool d40_is_paused(struct d40_chan *d40c)
>  		goto _exit;
>  	}
>  
> -	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
> -	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
> +	if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
> +	    d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
>  		status = readl(chanbase + D40_CHAN_REG_SDLNK);
> -	} else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
> +	} else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
>  		status = readl(chanbase + D40_CHAN_REG_SSLNK);
>  	} else {
>  		chan_err(d40c, "Unknown direction\n");
> @@ -2387,12 +2387,12 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
>  	if (d40c->base->rev < 3)
>  		return;
>  
> -	if ((d40c->dma_cfg.dir ==  STEDMA40_PERIPH_TO_MEM) ||
> -	    (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> +	if ((d40c->dma_cfg.dir ==  DMA_DEV_TO_MEM) ||
> +	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
>  		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
>  
> -	if ((d40c->dma_cfg.dir ==  STEDMA40_MEM_TO_PERIPH) ||
> -	    (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
> +	if ((d40c->dma_cfg.dir ==  DMA_MEM_TO_DEV) ||
> +	    (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
>  		__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
>  }
>  
> @@ -2423,11 +2423,11 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
>  
>  	switch (D40_DT_FLAGS_DIR(flags)) {
>  	case 0:
> -		cfg.dir = STEDMA40_MEM_TO_PERIPH;
> +		cfg.dir = DMA_MEM_TO_DEV;
>  		cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
>  		break;
>  	case 1:
> -		cfg.dir = STEDMA40_PERIPH_TO_MEM;
> +		cfg.dir = DMA_DEV_TO_MEM;
>  		cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
>  		break;
>  	}
> @@ -2473,7 +2473,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
>  	d40_set_prio_realtime(d40c);
>  
>  	if (chan_is_logical(d40c)) {
> -		if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
> +		if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
>  			d40c->lcpa = d40c->base->lcpa_base +
>  				d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
>  		else
> @@ -2746,12 +2746,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
>  	if (config->direction == DMA_DEV_TO_MEM) {
>  		config_addr = config->src_addr;
>  
> -		if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
> +		if (cfg->dir != DMA_DEV_TO_MEM)
>  			dev_dbg(d40c->base->dev,
>  				"channel was not configured for peripheral "
>  				"to memory transfer (%d) overriding\n",
>  				cfg->dir);
> -		cfg->dir = STEDMA40_PERIPH_TO_MEM;
> +		cfg->dir = DMA_DEV_TO_MEM;
>  
>  		/* Configure the memory side */
>  		if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
> @@ -2762,12 +2762,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
>  	} else if (config->direction == DMA_MEM_TO_DEV) {
>  		config_addr = config->dst_addr;
>  
> -		if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
> +		if (cfg->dir != DMA_MEM_TO_DEV)
>  			dev_dbg(d40c->base->dev,
>  				"channel was not configured for memory "
>  				"to peripheral transfer (%d) overriding\n",
>  				cfg->dir);
> -		cfg->dir = STEDMA40_MEM_TO_PERIPH;
> +		cfg->dir = DMA_MEM_TO_DEV;
>  
>  		/* Configure the memory side */
>  		if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index ab5a2a7..121c0ce 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -18,23 +18,23 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
>  	u32 l1 = 0; /* src */
>  
>  	/* src is mem? -> increase address pos */
> -	if (cfg->dir ==  STEDMA40_MEM_TO_PERIPH ||
> -	    cfg->dir ==  STEDMA40_MEM_TO_MEM)
> +	if (cfg->dir ==  DMA_MEM_TO_DEV ||
> +	    cfg->dir ==  DMA_MEM_TO_MEM)
>  		l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
>  
>  	/* dst is mem? -> increase address pos */
> -	if (cfg->dir ==  STEDMA40_PERIPH_TO_MEM ||
> -	    cfg->dir ==  STEDMA40_MEM_TO_MEM)
> +	if (cfg->dir ==  DMA_DEV_TO_MEM ||
> +	    cfg->dir ==  DMA_MEM_TO_MEM)
>  		l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
>  
>  	/* src is hw? -> master port 1 */
> -	if (cfg->dir ==  STEDMA40_PERIPH_TO_MEM ||
> -	    cfg->dir ==  STEDMA40_PERIPH_TO_PERIPH)
> +	if (cfg->dir ==  DMA_DEV_TO_MEM ||
> +	    cfg->dir ==  DMA_DEV_TO_DEV)
>  		l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
>  
>  	/* dst is hw? -> master port 1 */
> -	if (cfg->dir ==  STEDMA40_MEM_TO_PERIPH ||
> -	    cfg->dir ==  STEDMA40_PERIPH_TO_PERIPH)
> +	if (cfg->dir ==  DMA_MEM_TO_DEV ||
> +	    cfg->dir ==  DMA_DEV_TO_DEV)
>  		l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
>  
>  	l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
> @@ -55,8 +55,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
>  	u32 src = 0;
>  	u32 dst = 0;
>  
> -	if ((cfg->dir ==  STEDMA40_PERIPH_TO_MEM) ||
> -	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> +	if ((cfg->dir == DMA_DEV_TO_MEM) ||
> +	    (cfg->dir == DMA_DEV_TO_DEV)) {
>  		/* Set master port to 1 */
>  		src |= 1 << D40_SREG_CFG_MST_POS;
>  		src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> @@ -66,8 +66,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
>  		else
>  			src |= 3 << D40_SREG_CFG_PHY_TM_POS;
>  	}
> -	if ((cfg->dir ==  STEDMA40_MEM_TO_PERIPH) ||
> -	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> +	if ((cfg->dir == DMA_MEM_TO_DEV) ||
> +	    (cfg->dir == DMA_DEV_TO_DEV)) {
>  		/* Set master port to 1 */
>  		dst |= 1 << D40_SREG_CFG_MST_POS;
>  		dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -- 
> 1.7.10.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux