From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx> The AES controller only needs to be reset once and that will be done by the hwmod infrastructure, if possible. Therefore, remove the reset code from the omap-aes driver. CC: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx> Signed-off-by: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx> --- drivers/crypto/omap-aes.c | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index 481da71..33cd783 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -160,19 +160,6 @@ static void omap_aes_write_n(struct omap_aes_dev *dd, u32 offset, omap_aes_write(dd, offset, *value); } -static int omap_aes_wait(struct omap_aes_dev *dd, u32 offset, u32 bit) -{ - unsigned long timeout = jiffies + DEFAULT_TIMEOUT; - - while (!(omap_aes_read(dd, offset) & bit)) { - if (time_is_before_jiffies(timeout)) { - dev_err(dd->dev, "omap-aes timeout\n"); - return -ETIMEDOUT; - } - } - return 0; -} - static int omap_aes_hw_init(struct omap_aes_dev *dd) { /* @@ -183,20 +170,6 @@ static int omap_aes_hw_init(struct omap_aes_dev *dd) clk_enable(dd->iclk); if (!(dd->flags & FLAGS_INIT)) { - /* is it necessary to reset before every operation? */ - omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_SOFTRESET, - AES_REG_MASK_SOFTRESET); - /* - * prevent OCP bus error (SRESP) in case an access to the module - * is performed while the module is coming out of soft reset - */ - __asm__ __volatile__("nop"); - __asm__ __volatile__("nop"); - - if (omap_aes_wait(dd, AES_REG_SYSSTATUS, - AES_REG_SYSSTATUS_RESETDONE)) - return -ETIMEDOUT; - dd->flags |= FLAGS_INIT; dd->err = 0; } -- 1.7.12 -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html