DMA parameters for constant data were initialized during driver probe(). It seems that those settings sometimes are lost when devices goes to off mode. This patch makes DMA initialization just before use. It solves off mode problems. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx> --- drivers/crypto/omap-aes.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index 799ca51..41c91f3 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -339,18 +339,6 @@ static int omap_aes_dma_init(struct omap_aes_dev *dd) goto err_dma_out; } - omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT, - dd->phys_base + AES_REG_DATA, 0, 4); - - omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); - omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); - - omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT, - dd->phys_base + AES_REG_DATA, 0, 4); - - omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); - omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); - return 0; err_dma_out: @@ -443,6 +431,12 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in, len32 = DIV_ROUND_UP(length, sizeof(u32)); /* IN */ + omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT, + dd->phys_base + AES_REG_DATA, 0, 4); + + omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); + omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); + omap_set_dma_transfer_params(dd->dma_lch_in, OMAP_DMA_DATA_TYPE_S32, len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_in, OMAP_DMA_DST_SYNC); @@ -451,6 +445,12 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in, dma_addr_in, 0, 0); /* OUT */ + omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT, + dd->phys_base + AES_REG_DATA, 0, 4); + + omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); + omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); + omap_set_dma_transfer_params(dd->dma_lch_out, OMAP_DMA_DATA_TYPE_S32, len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_out, OMAP_DMA_SRC_SYNC); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
