DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
---
drivers/crypto/omap-aes.c | 30 +++++++++++++++---------------
1 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 9d65611..04cab70 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -99,7 +99,7 @@ struct omap_aes_reqctx {
struct omap_aes_dev {
struct list_head list;
unsigned long phys_base;
- void __iomem *io_base;
+ void __iomem *io_base;
struct clk *iclk;
struct omap_aes_ctx *ctx;
struct device *dev;
@@ -341,18 +341,6 @@ static int omap_aes_dma_init(struct omap_aes_dev *dd)
goto err_dma_out;
}
- omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT,
- dd->phys_base + AES_REG_DATA, 0, 4);
-
- omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
- omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
-
- omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT,
- dd->phys_base + AES_REG_DATA, 0, 4);
-
- omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
- omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
-
return 0;
err_dma_out:
@@ -445,6 +433,12 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in,
len32 = DIV_ROUND_UP(length, sizeof(u32));
/* IN */
+ omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT,
+ dd->phys_base + AES_REG_DATA, 0, 4);
+
+ omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
+ omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
+
omap_set_dma_transfer_params(dd->dma_lch_in, OMAP_DMA_DATA_TYPE_S32,
len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_in,
OMAP_DMA_DST_SYNC);
@@ -453,6 +447,12 @@ static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in,
dma_addr_in, 0, 0);
/* OUT */
+ omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT,
+ dd->phys_base + AES_REG_DATA, 0, 4);
+
+ omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
+ omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
+
omap_set_dma_transfer_params(dd->dma_lch_out, OMAP_DMA_DATA_TYPE_S32,
len32, 1, OMAP_DMA_SYNC_PACKET,
dd->dma_out, OMAP_DMA_SRC_SYNC);
@@ -752,7 +752,7 @@ static struct crypto_alg algs[] = {
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct omap_aes_ctx),
- .cra_alignmask = 0,
+ .cra_alignmask = 0,
.cra_type = &crypto_ablkcipher_type,
.cra_module = THIS_MODULE,
.cra_init = omap_aes_cra_init,
@@ -772,7 +772,7 @@ static struct crypto_alg algs[] = {
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct omap_aes_ctx),
- .cra_alignmask = 0,
+ .cra_alignmask = 0,
.cra_type = &crypto_ablkcipher_type,
.cra_module = THIS_MODULE,
.cra_init = omap_aes_cra_init,
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
