On Thursday 09 June 2011 00:45:54 Timur Tabi wrote:
> +struct fsl_hv_ioctl_memcpy {
> + __u32 ret;
> + __u32 source;
> + __u32 target;
> + __u64 local_vaddr;
> + __u64 remote_paddr;
> + __u64 count;
> +};
> +struct fsl_hv_ioctl_prop {
> + __u32 ret;
> + __u32 handle;
> + __u64 path;
> + __u64 propname;
> + __u64 propval;
> + __u32 proplen;
> +};
These structures have implied padding. Better make it explicit by
adding the appropriate __u32 __pad1 members or similar.
> +/*
> + * ioctl commands.
> + */
> +enum {
> + FSL_HV_IOCTL_PARTITION_RESTART = 1, /* Boot another partition */
> + FSL_HV_IOCTL_PARTITION_GET_STATUS = 2, /* Boot another partition */
> + FSL_HV_IOCTL_PARTITION_START = 3, /* Boot another partition */
> + FSL_HV_IOCTL_PARTITION_STOP = 4, /* Stop this or another partition */
> + FSL_HV_IOCTL_MEMCPY = 5, /* Copy data from one partition to another */
> + FSL_HV_IOCTL_DOORBELL = 6, /* Ring a doorbell */
> +
> + /* Get a property from another guest's device tree */
> + FSL_HV_IOCTL_GETPROP = 7,
> +
> + /* Set a property in another guest's device tree */
> + FSL_HV_IOCTL_SETPROP = 8,
> +};
As discussed before, this one should really be using the _IOC macros to define
the commands that you use based on the structure definitions above, e.g.
#define FSL_HV_IOCTL_GETPROP _IORW(FSL_HV, 8, struct fsl_hv_ioctl_prop)
Then get rid of all the code that takes apart the ioctl command numbers
again and just do a switch/case based on the command.
Arnd
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-console" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
