Re: [PATCH] cifs: prevent data race in smb2_reconnect()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



tentatively merged into cifs-2.6.git for-next pending review/testing

On Mon, Jan 30, 2023 at 5:33 PM Paulo Alcantara <pc@xxxxxx> wrote:
>
> Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
> to waiting the server to be reconnected in smb2_reconnect().  It is
> set in cifs_tcp_ses_needs_reconnect() and protected by
> TCP_Server_Info::srv_lock.
>
> Signed-off-by: Paulo Alcantara (SUSE) <pc@xxxxxx>
> ---
>  fs/cifs/smb2pdu.c | 119 +++++++++++++++++++++++++---------------------
>  1 file changed, 64 insertions(+), 55 deletions(-)
>
> diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
> index 2c9ffa921e6f..2d5c3df2277d 100644
> --- a/fs/cifs/smb2pdu.c
> +++ b/fs/cifs/smb2pdu.c
> @@ -139,6 +139,66 @@ smb2_hdr_assemble(struct smb2_hdr *shdr, __le16 smb2_cmd,
>         return;
>  }
>
> +static int wait_for_server_reconnect(struct TCP_Server_Info *server,
> +                                    __le16 smb2_command, bool retry)
> +{
> +       int timeout = 10;
> +       int rc;
> +
> +       spin_lock(&server->srv_lock);
> +       if (server->tcpStatus != CifsNeedReconnect) {
> +               spin_unlock(&server->srv_lock);
> +               return 0;
> +       }
> +       timeout *= server->nr_targets;
> +       spin_unlock(&server->srv_lock);
> +
> +       /*
> +        * Return to caller for TREE_DISCONNECT and LOGOFF and CLOSE
> +        * here since they are implicitly done when session drops.
> +        */
> +       switch (smb2_command) {
> +       /*
> +        * BB Should we keep oplock break and add flush to exceptions?
> +        */
> +       case SMB2_TREE_DISCONNECT:
> +       case SMB2_CANCEL:
> +       case SMB2_CLOSE:
> +       case SMB2_OPLOCK_BREAK:
> +               return -EAGAIN;
> +       }
> +
> +       /*
> +        * Give demultiplex thread up to 10 seconds to each target available for
> +        * reconnect -- should be greater than cifs socket timeout which is 7
> +        * seconds.
> +        *
> +        * On "soft" mounts we wait once. Hard mounts keep retrying until
> +        * process is killed or server comes back on-line.
> +        */
> +       do {
> +               rc = wait_event_interruptible_timeout(server->response_q,
> +                                                     (server->tcpStatus != CifsNeedReconnect),
> +                                                     timeout * HZ);
> +               if (rc < 0) {
> +                       cifs_dbg(FYI, "%s: aborting reconnect due to received signal\n",
> +                                __func__);
> +                       return -ERESTARTSYS;
> +               }
> +
> +               /* are we still trying to reconnect? */
> +               spin_lock(&server->srv_lock);
> +               if (server->tcpStatus != CifsNeedReconnect) {
> +                       spin_unlock(&server->srv_lock);
> +                       return 0;
> +               }
> +               spin_unlock(&server->srv_lock);
> +       } while (retry);
> +
> +       cifs_dbg(FYI, "%s: gave up waiting on reconnect\n", __func__);
> +       return -EHOSTDOWN;
> +}
> +
>  static int
>  smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
>                struct TCP_Server_Info *server)
> @@ -146,7 +206,6 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
>         int rc = 0;
>         struct nls_table *nls_codepage;
>         struct cifs_ses *ses;
> -       int retries;
>
>         /*
>          * SMB2s NegProt, SessSetup, Logoff do not have tcon yet so
> @@ -184,61 +243,11 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
>             (!tcon->ses->server) || !server)
>                 return -EIO;
>
> +       rc = wait_for_server_reconnect(server, smb2_command, tcon->retry);
> +       if (rc)
> +               return rc;
> +
>         ses = tcon->ses;
> -       retries = server->nr_targets;
> -
> -       /*
> -        * Give demultiplex thread up to 10 seconds to each target available for
> -        * reconnect -- should be greater than cifs socket timeout which is 7
> -        * seconds.
> -        */
> -       while (server->tcpStatus == CifsNeedReconnect) {
> -               /*
> -                * Return to caller for TREE_DISCONNECT and LOGOFF and CLOSE
> -                * here since they are implicitly done when session drops.
> -                */
> -               switch (smb2_command) {
> -               /*
> -                * BB Should we keep oplock break and add flush to exceptions?
> -                */
> -               case SMB2_TREE_DISCONNECT:
> -               case SMB2_CANCEL:
> -               case SMB2_CLOSE:
> -               case SMB2_OPLOCK_BREAK:
> -                       return -EAGAIN;
> -               }
> -
> -               rc = wait_event_interruptible_timeout(server->response_q,
> -                                                     (server->tcpStatus != CifsNeedReconnect),
> -                                                     10 * HZ);
> -               if (rc < 0) {
> -                       cifs_dbg(FYI, "%s: aborting reconnect due to a received signal by the process\n",
> -                                __func__);
> -                       return -ERESTARTSYS;
> -               }
> -
> -               /* are we still trying to reconnect? */
> -               spin_lock(&server->srv_lock);
> -               if (server->tcpStatus != CifsNeedReconnect) {
> -                       spin_unlock(&server->srv_lock);
> -                       break;
> -               }
> -               spin_unlock(&server->srv_lock);
> -
> -               if (retries && --retries)
> -                       continue;
> -
> -               /*
> -                * on "soft" mounts we wait once. Hard mounts keep
> -                * retrying until process is killed or server comes
> -                * back on-line
> -                */
> -               if (!tcon->retry) {
> -                       cifs_dbg(FYI, "gave up waiting on reconnect in smb_init\n");
> -                       return -EHOSTDOWN;
> -               }
> -               retries = server->nr_targets;
> -       }
>
>         spin_lock(&ses->chan_lock);
>         if (!cifs_chan_needs_reconnect(ses, server) && !tcon->need_reconnect) {
> --
> 2.39.1
>


-- 
Thanks,

Steve



[Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux