Re: [PATCH] cifs: Fix problem with encrypted RDMA data read

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 16.11.22 um 16:41 schrieb Tom Talpey:
On 11/16/2022 3:36 AM, Stefan Metzmacher wrote:
Am 16.11.22 um 06:19 schrieb Namjae Jeon:
2022-11-16 9:57 GMT+09:00, Stefan Metzmacher <metze@xxxxxxxxx>:
Hi David,

see below...

When the cifs client is talking to the ksmbd server by RDMA and the ksmbd
server has "smb3 encryption = yes" in its config file, the normal PDU
stream is encrypted, but the directly-delivered data isn't in the stream
(and isn't encrypted), but is rather delivered by DDP/RDMA packets (at
least with IWarp).

Currently, the direct delivery fails with:

     buf can not contain only a part of read data
     WARNING: CPU: 0 PID: 4619 at fs/cifs/smb2ops.c:4731
handle_read_data+0x393/0x405
     ...
     RIP: 0010:handle_read_data+0x393/0x405
     ...
      smb3_handle_read_data+0x30/0x37
      receive_encrypted_standard+0x141/0x224
      cifs_demultiplex_thread+0x21a/0x63b
      kthread+0xe7/0xef
      ret_from_fork+0x22/0x30

The problem apparently stemming from the fact that it's trying to manage
the decryption, but the data isn't in the smallbuf, the bigbuf or the
page
array).

This can be fixed simply by inserting an extra case into
handle_read_data()
that checks to see if use_rdma_mr is true, and if it is, just setting
rdata->got_bytes to the length of data delivered and allowing normal
continuation.

This can be seen in an IWarp packet trace.  With the upstream code, it
does
a DDP/RDMA packet, which produces the warning above and then retries,
retrieving the data inline, spread across several SMBDirect messages that
get glued together into a single PDU.  With the patch applied, only the
DDP/RDMA packet is seen.

Note that this doesn't happen if the server isn't told to encrypt stuff
and
it does also happen with softRoCE.

Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
cc: Steve French <smfrench@xxxxxxxxx>
cc: Tom Talpey <tom@xxxxxxxxxx>
cc: Long Li <longli@xxxxxxxxxxxxx>
cc: Namjae Jeon <linkinjeon@xxxxxxxxxx>
cc: Stefan Metzmacher <metze@xxxxxxxxx>
cc: linux-cifs@xxxxxxxxxxxxxxx
---

   fs/cifs/smb2ops.c |    3 +++
   1 file changed, 3 insertions(+)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 880cd494afea..8d459f60f27b 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -4726,6 +4726,9 @@ handle_read_data(struct TCP_Server_Info *server,
struct mid_q_entry *mid,
           iov.iov_base = buf + data_offset;
           iov.iov_len = data_len;
           iov_iter_kvec(&iter, WRITE, &iov, 1, data_len);
+    } else if (use_rdma_mr) {
+        /* The data was delivered directly by RDMA. */
+        rdata->got_bytes = data_len;
       } else {
           /* read response payload cannot be in both buf and pages */
           WARN_ONCE(1, "buf can not contain only a part of read data");

I'm not sure I understand why this would fix anything when encryption is
enabled.

Is the payload still be offloaded as plaintext? Otherwise we wouldn't have
use_rdma_mr...
So this rather looks like a fix for the non encrypted case.
ksmbd doesn't encrypt RDMA payload on read/write operation, Currently
only smb2 response is encrypted for this. And as you pointed out, We
need to implement SMB2 RDMA Transform to encrypt it.

I haven't tested against a windows server yet, but my hope would be that
and encrypted request with SMB2_CHANNEL_RDMA_V1* receive NT_STATUS_ACCESS_DENIED or something similar...

Is someone able to check that against Windows?

It's not going to fail, because it's perfectly legal per the protocol.
And the new SMB3 extension to perform pre-encryption of RDMA payload
is not a solution, because it's only supported by one server (Windows
22H2) and in any case it does not alter the transfer model. The client
will see the same two-part response (headers in the inline portion,
data via RDMA), so this same code will be entered when processing it.

I think David's change is on the right track because it actually
processes the response. I'm a little bit skeptical of the got_bytes
override however, still digging into that.

But the core of it is a client security problem, shown in David's capture in frame 100.

Sorry, what's the security problem? Both the client and server appear
to be implementing the protocol itself correctly.

Data goes in plaintext over the wire and a share that requires encryption!

metze




[Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux