Re: [PATCH] cifs: flush all dirty pages to server before read/write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi steve,

On 2022/4/28 10:47 PM, Steve French wrote:
Got some additional review comments/questions about this patch.

In __cifs_writev isn't it likely that the write will be async and now
become synchronous and also could we now have a duplicated write
(flushing the write, then calling write again on that range)?

Yes, you are right.
But for a direct write, cifs must writes those buffer pages to server
before the direct write is send to server.


For example, the change you added

+       if (CIFS_CACHE_WRITE(CIFS_I(inode)) &&
+           inode->i_mapping && inode->i_mapping->nrpages != 0) {
+               rc = filemap_write_and_wait(inode->i_mapping);

will write synchronously all dirty pages but then proceed to call the async

         rc = cifs_write_from_iter(iocb->ki_pos, ctx->len, &saved_from,
                                   cfile, cifs_sb, &ctx->list, ctx);

a few lines later.  Won't this kill performance?

Yes, it is kill performance.
But for cache=none, i don't think the local dirty pages should left
when a new direct write coming.


What was the reason for this part of the patch?  Doesn't the original
code end up in the same place around line 678 in mm/filemap.c

                         int err2 = filemap_fdatawait_range(mapping,
                                                 lstart, lend);

called from:

@@ -2440,7 +2440,7 @@ int cifs_getattr(struct user_namespace
*mnt_userns, const struct path *path,
         if ((request_mask & (STATX_CTIME | STATX_MTIME | STATX_SIZE |
STATX_BLOCKS)) &&
             !CIFS_CACHE_READ(CIFS_I(inode)) &&
             inode->i_mapping && inode->i_mapping->nrpages != 0) {
-               rc = filemap_fdatawait(inode->i_mapping);
+               rc = filemap_write_and_wait(inode->i_mapping);

This fix is the other case when mounting cifs with nolease,
# mount -t cifs -ocache=none,nolease,nobrl,guest //cifsserverip/test /mnt/cifs # ./testcases/bin/fsx-linux -l 500000 -r 4096 -t 4096 -w 4096 -N 10000 /mnt/cifs/junkfile

fsx-linux fails too.

After rethinking of this problem, i think the core problem is
the buffer io between direct io. In cifs_getattr, it flushs dirty pages if !CIFS_CACHE_READ(CIFS_I(inode)), but when oplock is granted,
it's always false, so the dirty pages are not send to server.

With write oplock granted, it's right of don't send those dirty pages to server, but the following direct ios, should be send to server directly,
or gets data from the local dirty pages?

Maybe cifs should flush all dirty pages at cifs_getattr as NFS nfs_getattr does,

        /* Flush out writes to the server in order to update c/mtime.  */
        if ((request_mask & (STATX_CTIME | STATX_MTIME)) &&
            S_ISREG(inode->i_mode))
                filemap_write_and_wait(inode->i_mapping);

After modifing cifs_getattr as following without changing
__cifs_readv/__cifs_writev, the fsx-linux test pass at
-ocache=none,nolease,nobrl,guest and -ocache=none,nobrl,guest.

@@ -2438,9 +2438,8 @@ int cifs_getattr(struct user_namespace *mnt_userns, const struct path *path,
         * has actual ctime, mtime and file length.
         */
if ((request_mask & (STATX_CTIME | STATX_MTIME | STATX_SIZE | STATX_BLOCKS)) &&
-           !CIFS_CACHE_READ(CIFS_I(inode)) &&
-           inode->i_mapping && inode->i_mapping->nrpages != 0) {
-               rc = filemap_fdatawait(inode->i_mapping);
+           S_ISREG(inode->i_mode)) {
+               rc = filemap_write_and_wait(inode->i_mapping);
                if (rc) {
                        mapping_set_error(inode->i_mapping, rc);
                        return rc;

thanks,
Kinglong Mee


On Wed, Apr 27, 2022 at 10:10 PM Steve French <smfrench@xxxxxxxxx> wrote:

merged into cifs-2.6.git for-next pending testing

On Sun, Apr 24, 2022 at 10:41 PM Kinglong Mee <kinglongmee@xxxxxxxxx> wrote:

ping...

On Mon, Apr 11, 2022 at 3:39 PM Kinglong Mee <kinglongmee@xxxxxxxxx> wrote:

Testing with ltp, fsx-linux fail as,

# mount -t cifs -ocache=none,nobrl,guest //cifsserverip/test /mnt/cifs/
# dd if=/dev/zero of=/mnt/cifs//junkfile bs=8192 count=19200 conv=block
# ./testcases/bin/fsx-linux -l 500000 -r 4096 -t 4096 -w 4096 -N 10000 /mnt/cifs/junkfile
skipping zero size read
truncating to largest ever: 0x2c000
READ BAD DATA: offset = 0x1c000, size = 0x9cc0
OFFSET  GOOD    BAD     RANGE
0x1c000 0x09d2  000000  0x22ed
operation# (mod 256) for the bad dataunknown, check HOLE and EXTEND ops
LOG DUMP (10 total operations):
1: 1649662377.404010 SKIPPED (no operation)
2: 1649662377.413729 WRITE    0x3000 thru 0xdece (0xaecf bytes) HOLE
3: 1649662377.424961 WRITE    0x19000 thru 0x1b410 (0x2411 bytes) HOLE
4: 1649662377.435135 TRUNCATE UP        from 0x1b411 to 0x2c000 ******WWWW
5: 1649662377.487010 MAPWRITE 0x5000 thru 0x13077 (0xe078 bytes)
6: 1649662377.495006 MAPREAD  0x8000 thru 0xe16c (0x616d bytes)
7: 1649662377.500638 MAPREAD  0x1e000 thru 0x2054d (0x254e bytes)       ***RRRR***
8: 1649662377.506165 WRITE    0x76000 thru 0x7993f (0x3940 bytes) HOLE
9: 1649662377.516674 MAPWRITE 0x1a000 thru 0x1e2fe (0x42ff bytes)       ******WWWW
10: 1649662377.535312 READ     0x1c000 thru 0x25cbf (0x9cc0 bytes)      ***RRRR***
Correct content saved for comparison
(maybe hexdump "/mnt/cifs/junkfile" vs "/mnt/cifs/junkfile.fsxgood")

Those data written at MAPWRITE is not flush to smb server,
but the fallowing read gets data from the backend.

Signed-off-by: Kinglong Mee <kinglongmee@xxxxxxxxx>
---
  fs/cifs/file.c  | 22 ++++++++++++++++++++++
  fs/cifs/inode.c |  2 +-
  2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index d511a78383c3..11912474563e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3222,6 +3222,7 @@ static ssize_t __cifs_writev(
         struct kiocb *iocb, struct iov_iter *from, bool direct)
  {
         struct file *file = iocb->ki_filp;
+       struct inode *inode = file_inode(iocb->ki_filp);
         ssize_t total_written = 0;
         struct cifsFileInfo *cfile;
         struct cifs_tcon *tcon;
@@ -3249,6 +3250,16 @@ static ssize_t __cifs_writev(
         cfile = file->private_data;
         tcon = tlink_tcon(cfile->tlink);

+       /* We need to be sure that all dirty pages are written to the server. */
+       if (CIFS_CACHE_WRITE(CIFS_I(inode)) &&
+           inode->i_mapping && inode->i_mapping->nrpages != 0) {
+               rc = filemap_write_and_wait(inode->i_mapping);
+               if (rc) {
+                       mapping_set_error(inode->i_mapping, rc);
+                       return rc;
+               }
+       }
+
         if (!tcon->ses->server->ops->async_writev)
                 return -ENOSYS;

@@ -3961,6 +3972,7 @@ static ssize_t __cifs_readv(
  {
         size_t len;
         struct file *file = iocb->ki_filp;
+       struct inode *inode = file_inode(iocb->ki_filp);
         struct cifs_sb_info *cifs_sb;
         struct cifsFileInfo *cfile;
         struct cifs_tcon *tcon;
@@ -3986,6 +3998,16 @@ static ssize_t __cifs_readv(
         cfile = file->private_data;
         tcon = tlink_tcon(cfile->tlink);

+       /* We need to be sure that all dirty pages are written to the server. */
+       if (CIFS_CACHE_WRITE(CIFS_I(inode)) &&
+           inode->i_mapping && inode->i_mapping->nrpages != 0) {
+               rc = filemap_write_and_wait(inode->i_mapping);
+               if (rc) {
+                       mapping_set_error(inode->i_mapping, rc);
+                       return rc;
+               }
+       }
+
         if (!tcon->ses->server->ops->async_readv)
                 return -ENOSYS;

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 2f9e7d2f81b6..d5c07196a81e 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -2440,7 +2440,7 @@ int cifs_getattr(struct user_namespace *mnt_userns, const struct path *path,
         if ((request_mask & (STATX_CTIME | STATX_MTIME | STATX_SIZE | STATX_BLOCKS)) &&
             !CIFS_CACHE_READ(CIFS_I(inode)) &&
             inode->i_mapping && inode->i_mapping->nrpages != 0) {
-               rc = filemap_fdatawait(inode->i_mapping);
+               rc = filemap_write_and_wait(inode->i_mapping);
                 if (rc) {
                         mapping_set_error(inode->i_mapping, rc);
                         return rc;
--
2.35.1




--
Thanks,

Steve






[Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux