Hello guys, I'd like to test SMB Direct. But it's failed. I'm not sure if it works in upstream. I setup samba server on one rdma machine with 5.5.0-rc1+ kernel. The smb.conf is: [cifs] path=/mnt/cifs writeable=yes Then I try to mount the share on another rdma machine with 5.5.0-rc1+ kernel. mount //$RDMA/cifs cifs -o user=root,password=$password,rdma It's failed because of "CIFS VFS: smbd_create_id:614 rdma_resolve_addr() completed -113" Does SMB Direct work fine in upstream? Thanks. $ cat /boot/config-5.5.0-rc1+ |grep SMB_DIRECT CONFIG_CIFS_SMB_DIRECT=y $ ibstat CA 'mlx4_0' CA type: MT4099 Number of ports: 2 Firmware version: 2.42.5000 Hardware version: 1 Node GUID: 0xf4521403007be0e0 System image GUID: 0xf4521403007be0e3 Port 1: State: Active Physical state: LinkUp Rate: 56 Base lid: 29 LMC: 0 SM lid: 1 Capability mask: 0x0259486a Port GUID: 0xf4521403007be0e1 Link layer: InfiniBand Port 2: State: Active Physical state: LinkUp Rate: 40 Base lid: 44 LMC: 1 SM lid: 36 Capability mask: 0x02594868 Port GUID: 0xf4521403007be0e2 Link layer: InfiniBand -- Best regards! XiaoLi Feng 冯小丽 Red Hat Software (Beijing) Co.,Ltd filesystem-qe Team IRC:xifeng，#channel: fs-qe Tel:+86-10-8388112 9/F, Raycom
