2014-07-10 14:26 GMT+04:00 Ashish Sangwan :
>> I am using kernel version 3.8.13 and windows 7.
>>
>> The below command works successfully:
>> Linux#> mount -t cifs //107.109.224.147/sharefolder /mnt -o user=a.sangwan -o pass=xxxx -o vers=1.0 -o sec=ntlm
>>
>> Other than 1.0, all are fail:
>> Linux#> mount -t cifs //107.109.224.147/sharefolder /mnt -o user=a.sangwan -o pass=xxxx -o vers=2.0 -o sec=ntlm
>> [ 0][ 64.276000] Status code returned 0xc000006d STATUS_LOGON_FAILURE
>> [ 0][ 64.284000] CIFS VFS: Send error in SessSetup = -13
>>
>> Tried with sec=ntlmv2/none/lanman/krb5, none of them worked.
>> Help please!!
>
>Did you tries without "sec=" option at all?
Yes, without sec=ntlm option, I am not able to mount even with vers=1.0
VDLinux#> mount -t cifs //107.109.224.147/sharefolder /mnt -o user=a.sangwan -o pass=xxxx -o vers=1.0
[ 0][ 1082.672000] selected vers 1.0
[ 0][ 1082.680000] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 0][ 1082.688000] CIFS VFS: Send error in SessSetup = -13
mount: mounting //107.109.224.147/sharefolder on /mnt failed: Permission denied
>
>If yes, you should set "echo 1 > /proc/fs/cifs/cifsFYI', try to mount
>and collect dmesg output and send it to the list.
Here it is for the command:
VDLinux#> mount -t cifs //107.109.224.147/sharefolder /mnt -o user=a.sangwan -o pass=xxxx -o vers=1.0
[ 0][ 1082.844000] fs/cifs/netmisc.c: address conversion returned 1 for 107.109.224.147\sharefolder
[ 0][ 1082.844000] fs/cifs/connect.c: Username: a.sangwan
[ 0][ 1082.844000] fs/cifs/connect.c: file mode: 0x1ed dir mode: 0x1ed
[ 0][ 1082.844000] fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 50 with uid: 0
[ 0][ 1082.844000] fs/cifs/connect.c: UNC: \\107.109.224.147\sharefolder
[ 0][ 1082.844000] fs/cifs/connect.c: Socket created
[ 0][ 1082.844000] fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x6d6
[ 0][ 1082.848000] fs/cifs/fscache.c: cifs_fscache_get_client_cookie: (0xe5b36c00/0xe5b7f230)
[ 0][ 1082.848000] fs/cifs/connect.c: CIFS VFS: in cifs_get_smb_ses as Xid: 51 with uid: 0
[ 0][ 1082.848000] fs/cifs/connect.c: Existing smb sess not found
[ 0][ 1082.848000] fs/cifs/cifssmb.c: secFlags 0x81
[ 0][ 1082.848000] fs/cifs/cifssmb.c: NTLMSSP only mechanism, enable extended security
[ 0][ 1082.848000] fs/cifs/transport.c: For smb_command 114
[ 0][ 1082.848000] fs/cifs/transport.c: Sending smb: smb_len=69
[ 0][ 1082.848000] fs/cifs/connect.c: Demultiplex PID: 222
[ 0][ 1082.848000] fs/cifs/connect.c: RFC1002 header 0x7f
[ 0][ 1082.848000] fs/cifs/transport.c: cifs_sync_mid_result: cmd=114 mid=1 state=4
[ 0][ 1082.848000] fs/cifs/cifssmb.c: Dialect: 2
[ 0][ 1082.848000] fs/cifs/cifssmb.c: Max buf = 4356
[ 0][ 1082.848000] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1
[ 0][ 1082.848000] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1
[ 0][ 1082.848000] fs/cifs/cifssmb.c: negprot rc 0
[ 0][ 1082.848000] fs/cifs/connect.c: Security Mode: 0x3 Capabilities: 0x8001e3fc TimeAdjust: -19800
[ 0][ 1082.848000] fs/cifs/sess.c: sess setup type 3
[ 0][ 1082.848000] fs/cifs/sess.c: ntlmssp session setup phase 1
[ 0][ 1082.848000] fs/cifs/transport.c: For smb_command 115
[ 0][ 1082.848000] fs/cifs/transport.c: Sending smb: smb_len=186
[ 0][ 1082.848000] fs/cifs/connect.c: RFC1002 header 0x161
[ 0][ 1082.848000] fs/cifs/transport.c: cifs_sync_mid_result: cmd=115 mid=2 state=4
[ 0][ 1082.848000] fs/cifs/netmisc.c: Mapping smb error code 0xc0000016 to POSIX err -5
[ 0][ 1082.848000] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release
[ 0][ 1082.848000] fs/cifs/sess.c: UID = 2048
[ 0][ 1082.848000] fs/cifs/sess.c: bleft 131
[ 0][ 1082.848000] fs/cifs/sess.c: serverOS=Windows 7 Enterprise 7601 Service Pack 1
[ 0][ 1082.848000] fs/cifs/sess.c: serverNOS=Windows 7 Enterprise 6.1
[ 0][ 1082.848000] fs/cifs/sess.c: ssetup freeing small buf e5bc1c00
[ 0][ 1082.848000] fs/cifs/sess.c: ntlmssp session setup phase 3
[ 0][ 1082.848000] fs/cifs/transport.c: For smb_command 115
[ 0][ 1082.848000] fs/cifs/transport.c: Sending smb: smb_len=420
[ 0][ 1082.852000] fs/cifs/connect.c: RFC1002 header 0x23
[ 0][ 1082.852000] fs/cifs/transport.c: cifs_sync_mid_result: cmd=115 mid=3 state=4
[ 0][ 1082.852000] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 0][ 1082.856000] fs/cifs/netmisc.c: Mapping smb error code 0xc000006d to POSIX err -13
[ 0][ 1082.856000] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release
[ 0][ 1082.856000] fs/cifs/sess.c: ssetup freeing small buf e5bc1500
[ 0][ 1082.856000] CIFS VFS: Send error in SessSetup = -13
[ 0][ 1082.860000] fs/cifs/connect.c: CIFS VFS: leaving cifs_get_smb_ses (xid = 51) rc = -13
[ 0][ 1082.860000] fs/cifs/fscache.c: cifs_fscache_release_client_cookie: (0xe5b36c00/0xe5b7f230)
In other mail Benjamin has suggessted to additionally provide -o "domain="
I am wondering why SMB1.0 is success as I don't provide domain in that cas too.
Anyway, I will try suggesstion.
Additionally, I am able to connect to samba server (v 4.0.2) from the same machine
without giving any -o sec -o domain option and it is success for all 2.0, 2.1 and 3.0 versions.
Regards,
Ashish
--
Best regards,
Pavel Shilovsky.ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ¥Šwÿº{.nÇ+‰·¥Š{±ýÈŸ³ø§¶›¡Ü¨}©ž²Æ zÚ&j:+v‰¨þø ¯ù ®w¥þŠà2ŠÞ™¨èÚ&¢)ß¡«a¶Úÿÿûàz¿äz¹Þ—ú+ƒùšŽŠÝ¢jÿŠwèþf
