2012/7/29 Jeff Layton <jlayton@xxxxxxxxxx>:
> On Fri, 27 Jul 2012 10:05:32 +0400
> Pavel Shilovsky <piastryyy@xxxxxxxxx> wrote:
>
>> 2012/7/27 Jeff Layton <jlayton@xxxxxxxxxx>:
>> > On Fri, 27 Jul 2012 03:57:44 +0400
>> > Pavel Shilovsky <piastryyy@xxxxxxxxx> wrote:
>> >
>> >> 2012/7/25 Jeff Layton <jlayton@xxxxxxxxxx>:
>> >> > We want to send SMBs as "atomically" as possible. Prior to sending any
>> >> > data on the socket, cork it to make sure that no non-full frames go
>> >> > out. Afterward, uncork it to make sure all of the data gets pushed out
>> >> > to the wire.
>> >> >
>> >> > Note that this more or less renders the socket=TCP_NODELAY mount option
>> >> > obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
>> >> > TCP_NODELAY is essentially ignored.
>> >> >
>> >> > Acked-by: Pavel Shilovsky <pshilovsky@xxxxxxxxx>
>> >> > Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
>> >> > ---
>> >> > fs/cifs/connect.c | 4 ++++
>> >> > fs/cifs/transport.c | 12 ++++++++++++
>> >> > 2 files changed, 16 insertions(+)
>> >> >
>> >> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>> >> > index 6df6fa1..a828a8c 100644
>> >> > --- a/fs/cifs/connect.c
>> >> > +++ b/fs/cifs/connect.c
>> >> > @@ -1676,6 +1676,10 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
>> >> > if (string == NULL)
>> >> > goto out_nomem;
>> >> >
>> >> > + /*
>> >> > + * FIXME: since we now cork/uncork the socket while
>> >> > + * sending, should we deprecate this option?
>> >> > + */
>> >> > if (strnicmp(string, "TCP_NODELAY", 11) == 0)
>> >> > vol->sockopt_tcp_nodelay = 1;
>> >> > break;
>> >> > diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
>> >> > index d93f15d..a3e58b2 100644
>> >> > --- a/fs/cifs/transport.c
>> >> > +++ b/fs/cifs/transport.c
>> >> > @@ -27,6 +27,7 @@
>> >> > #include <linux/net.h>
>> >> > #include <linux/delay.h>
>> >> > #include <linux/freezer.h>
>> >> > +#include <linux/tcp.h>
>> >> > #include <asm/uaccess.h>
>> >> > #include <asm/processor.h>
>> >> > #include <linux/mempool.h>
>> >> > @@ -247,12 +248,23 @@ smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst)
>> >> > int n_vec = rqst->rq_nvec;
>> >> > unsigned int smb_buf_length = get_rfc1002_length(iov[0].iov_base);
>> >> > size_t total_len;
>> >> > + struct socket *ssocket = server->ssocket;
>> >> > + int val = 1;
>> >> >
>> >> > cFYI(1, "Sending smb: smb_len=%u", smb_buf_length);
>> >> > dump_smb(iov[0].iov_base, iov[0].iov_len);
>> >> >
>> >> > + /* cork the socket */
>> >> > + kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK,
>> >> > + (char *)&val, sizeof(val));
>> >> > +
>> >> > rc = smb_send_kvec(server, iov, n_vec, &total_len);
>> >> >
>> >> > + /* uncork it */
>> >> > + val = 0;
>> >> > + kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK,
>> >> > + (char *)&val, sizeof(val));
>> >> > +
>> >> > if ((total_len > 0) && (total_len != smb_buf_length + 4)) {
>> >> > cFYI(1, "partial send (wanted=%u sent=%zu): terminating "
>> >> > "session", smb_buf_length + 4, total_len);
>> >> > --
>> >> > 1.7.11.2
>> >> >
>> >> > --
>> >> > To unsubscribe from this list: send the line "unsubscribe linux-cifs" in
>> >> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> >> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >>
>> >> I tested it with SMB2 against Windows 7 server. When iosize is 64K
>> >> everything is ok but when we increase iosize to 1M (by using
>> >> multicredit requests) and the server loses the network connection and
>> >> only reboot helps.
>> >>
>> >> Also if I commented corking/uncorking the socket - everything is ok. I
>> >> think this change needs some more investigation (how does it deals
>> >> with 1M iosize on Samba, etc?)
>> >>
>> >
>> > Hmm, haven't seen that with a 1M iosize with smb1 against samba.
>> >
>> > I'll see if I can reproduce it.
>> >
>> > --
>> > Jeff Layton <jlayton@xxxxxxxxxx>
>>
>> Forgot to mentioned how I reproduce it - dbench with 5 clients.
>>
>
> Ok, I've built a cifs.ko from your smb2-dev-cifs-3.6 branch. Here are my mount options:
>
> //win7.poochiereds.net/export /mnt/win7 cifs rw,relatime,vers=2.1,sec=ntlmsspi,cache=strict,unc=\\win7.poochiereds.net\export,username=testuser,domain=WIN7,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.32,file_mode=0755,dir_mode=0755,nounix,serverino,rsize=1048576,wsize=1048576,actimeo=1 0 0
I don't set rsize and wsize explicitly but I don't think it's related.
On what connection did you test it? I use 100Mbit LAN.
>
> I'm running dbench against it with 5 clients, but am seeing no hangs. Do I need to do something else to reproduce it?
>
> Note that I am seeing a number of these sorts of warning messages:
>
> [84306.348564] CIFS VFS: No task to wake, unknown frame received! NumMids 4
> [84306.353262] Received Data is: : dump of 68 bytes of data at 0xffff88000172aab0
> [84306.353266] 6c000000 424d53fe 00000040 00000000 . . . l \xfffffffe S M B @ . . . . . . .
> [84306.353269] 00000012 00000001 00000000 ffffffff . . . . . . . . . . . . \xffffffff \xffffffff \xffffffff \xffffffff
> [84306.353271] ffffffff 00000000 00000000 00000000 \xffffffff \xffffffff \xffffffff \xffffffff . . . . . . . . . . . .
> [84306.353273] 00000000 00000000 00000000 00000000 . . . . . . . . . . . . . . . .
> [84306.353275] 00000000 . . . .
> [84307.761162] CIFS VFS: No task to wake, unknown frame received! NumMids 5
> [84307.764904] Received Data is: : dump of 68 bytes of data at 0xffff88000172aab0
> [84307.764908] 6c000000 424d53fe 00000040 00000000 . . . l \xfffffffe S M B @ . . . . . . .
> [84307.764911] 00000012 00000001 00000000 ffffffff . . . . . . . . . . . . \xffffffff \xffffffff \xffffffff \xffffffff
> [84307.764914] ffffffff 00000000 00000000 00000000 \xffffffff \xffffffff \xffffffff \xffffffff . . . . . . . . . . . .
> [84307.764916] 00000000 00000000 00000000 00000000 . . . . . . . . . . . . . . . .
> [84307.764917] 00000000 . . . .
> [84311.566786] CIFS VFS: No task to wake, unknown frame received! NumMids 5
> [84311.570630] Received Data is: : dump of 68 bytes of data at 0xffff8800017a38f0
> [84311.570634] 6c000000 424d53fe 00000040 00000000 . . . l \xfffffffe S M B @ . . . . . . .
> [84311.570637] 00000012 00000001 00000000 ffffffff . . . . . . . . . . . . \xffffffff \xffffffff \xffffffff \xffffffff
> [84311.570639] ffffffff 00000000 00000000 00000000 \xffffffff \xffffffff \xffffffff \xffffffff . . . . . . . . . . . .
> [84311.570642] 00000000 00000000 00000000 00000000 . . . . . . . . . . . . . . . .
> [84311.570643] 00000000 . . . .
That's why the lease break issue that I mentioned later has been fixed yet.
>
> I get the same result whether I use TCP_CORK or not, so I don't think
> that's related.
>
> Also, after running dbench on a vers=2.1 mount and unplugging the kmod,
> I saw a bunch of these sorts of warnings, indicating memory leaks in
> the SMB2 code. Those may be related to the warnings above:
>
> [84980.135644] =============================================================================
> [84980.146094] BUG cifs_small_rq (Tainted: G O): Objects remaining on kmem_cache_close()
> [84980.156757] -----------------------------------------------------------------------------
> [84980.156757]
> [84980.177277] INFO: Slab 0xffffea00003e3d00 objects=19 used=17 fp=0xffff88000f8f6700 flags=0x10000000004080
> [84980.188416] Pid: 20224, comm: rmmod Tainted: G O 3.6.0-0.rc0.git2.1.fc18.x86_64 #1
> [84980.199692] Call Trace:
> [84980.210231] [<ffffffff811ac61f>] slab_err+0xaf/0xd0
> [84980.221112] [<ffffffff811b1329>] ? kmem_cache_destroy+0x249/0x3d0
> [84980.232334] [<ffffffff811b124b>] ? kmem_cache_destroy+0x16b/0x3d0
> [84980.243424] [<ffffffff811b126f>] kmem_cache_destroy+0x18f/0x3d0
> [84980.254653] [<ffffffff8115dff5>] ? mempool_destroy+0x55/0x60
> [84980.265816] [<ffffffffa0357d29>] cifs_destroy_request_bufs+0x39/0x3b [cifs]
> [84980.277350] [<ffffffffa0357f4f>] exit_cifs+0x30/0xe1 [cifs]
> [84980.287385] [<ffffffff810e1914>] sys_delete_module+0x1a4/0x300
> [84980.298287] [<ffffffff816d0795>] ? retint_swapgs+0x13/0x1b
> [84980.309234] [<ffffffff811008bc>] ? __audit_syscall_entry+0xcc/0x300
> [84980.320486] [<ffffffff8134879e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [84980.331739] [<ffffffff816d9269>] system_call_fastpath+0x16/0x1b
> [84980.342929] INFO: Object 0xffff88000f8f4000 @offset=0
> [84980.354043] INFO: Allocated in mempool_alloc_slab+0x15/0x20 age=173263 cpu=0 pid=19880
> [84980.365669] __slab_alloc+0x422/0x4d2
> [84980.376882] kmem_cache_alloc+0x227/0x260
> [84980.387943] mempool_alloc_slab+0x15/0x20
> [84980.398932] mempool_alloc+0x68/0x180
> [84980.409688] cifs_small_buf_get+0x1a/0x30 [cifs]
> [84980.420650] cifs_demultiplex_thread+0x405/0x950 [cifs]
> [84980.431773] kthread+0xb7/0xc0
> [84980.442675] kernel_thread_helper+0x4/0x10
>
> That probably needs to be investigated (and fixed) as well...
I have not seen something like this. Do you mean you load module,
mount, run dbench with 5 clients, umount share and unload module and
this errors appeared?
--
Best regards,
Pavel Shilovsky.
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
