Re: RE: [PATCH 1/2] can: flexcan: only set CAN_STATE_ERROR_ACTIVE when resume has no issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14.03.2025 09:48:06, Bough Chen wrote:
> > > > Only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has
> > > > no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
> > >
> > > When looking at the code, it makes no sense to set the can.state to
> > > CAN_STATE_ERROR_ACTIVE, if the device isn't up.
> > >
> > > The suspend function doesn't look correct, either. I'll send a v3.
> > 
> > After a suspend/resume cycle on a down interface, it will come up as
> > ERROR-ACTIVE.
> 
> Seems only need to handle the priv->can.state when netif_running(dev) return true in PM.

ACK - in both the suspend and the resume function.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux