Re: [PATCH 1/2] can: flexcan: only set CAN_STATE_ERROR_ACTIVE when resume has no issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 06, 2025 at 02:59:20PM +0800, haibo.chen@xxxxxxx wrote:
> From: Haibo Chen <haibo.chen@xxxxxxx>
>
> Only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process has
> no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
>
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>

Reviewed-by: Frank Li <Frank.Li@xxxxxxx>

> ---
>  drivers/net/can/flexcan/flexcan-core.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
> index b347a1c93536..8415ef71f1b1 100644
> --- a/drivers/net/can/flexcan/flexcan-core.c
> +++ b/drivers/net/can/flexcan/flexcan-core.c
> @@ -2311,7 +2311,6 @@ static int __maybe_unused flexcan_resume(struct device *device)
>  	struct flexcan_priv *priv = netdev_priv(dev);
>  	int err;
>
> -	priv->can.state = CAN_STATE_ERROR_ACTIVE;
>  	if (netif_running(dev)) {
>  		netif_device_attach(dev);
>  		netif_start_queue(dev);
> @@ -2332,6 +2331,7 @@ static int __maybe_unused flexcan_resume(struct device *device)
>  			flexcan_chip_interrupts_enable(dev);
>  		}
>  	}
> +	priv->can.state = CAN_STATE_ERROR_ACTIVE;
>
>  	return 0;
>  }
> --
> 2.34.1
>




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux