From: Sean Nyekjaer <sean@xxxxxxxxxx> The nWKRQ pin supports an output voltage of either the internal reference voltage (3.6V) or the reference voltage of the digital interface 0-6V (VIO). Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO. If this property is omitted the reset default, the internal reference voltage, is used. Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> Reviewed-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Link: https://patch.msgid.link/20241114-tcan-wkrqv-v5-1-a2d50833ed71@xxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- .../devicetree/bindings/net/can/ti,tcan4x5x.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml index afd9d315dea2..384e15da2713 100644 --- a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml +++ b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml @@ -110,6 +110,13 @@ properties: Must be half or less of "clocks" frequency. maximum: 18000000 + ti,nwkrq-voltage-vio: + type: boolean + description: + nWKRQ Pin GPO buffer voltage configuration. + Set nWKRQ to use VIO voltage rail. + When not set nWKRQ will use internal voltage rail. + wakeup-source: $ref: /schemas/types.yaml#/definitions/flag description: @@ -163,6 +170,7 @@ examples: device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + ti,nwkrq-voltage-vio; wakeup-source; }; }; -- 2.45.2
