Hello:
This series was applied to netdev/net.git (main)
by Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>:
On Wed, 18 Dec 2024 13:10:27 +0100 you wrote:
> From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
>
> While an m_can controller usually already has the init flag from a
> hardware reset, no such reset happens on the integrated m_can_pci of the
> Intel Elkhart Lake. If the CAN controller is found in an active state,
> m_can_dev_setup() would fail because m_can_niso_supported() calls
> m_can_cccr_update_bits(), which refuses to modify any other configuration
> bits when CCCR_INIT is not set.
>
> [...]
Here is the summary with links:
- [net,1/2] can: m_can: set init flag earlier in probe
https://git.kernel.org/netdev/net/c/fca2977629f4
- [net,2/2] can: m_can: fix missed interrupts with m_can_pci
https://git.kernel.org/netdev/net/c/743375f8deee
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
