The hi3110_can_ist() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission. The patch fixes the issue by incrementing the
appropriate counter based on the type of error.
Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
---
drivers/net/can/spi/hi311x.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index 148d974ebb21..7a4d98037cd3 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -701,17 +701,22 @@ static irqreturn_t hi3110_can_ist(int irq, void *dev_id)
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
priv->can.can_stats.bus_error++;
- priv->net->stats.rx_errors++;
- if (eflag & HI3110_ERR_BITERR)
+ if (eflag & HI3110_ERR_BITERR) {
cf->data[2] |= CAN_ERR_PROT_BIT;
- else if (eflag & HI3110_ERR_FRMERR)
+ priv->net->stats.tx_errors++;
+ } else if (eflag & HI3110_ERR_FRMERR) {
cf->data[2] |= CAN_ERR_PROT_FORM;
- else if (eflag & HI3110_ERR_STUFERR)
+ priv->net->stats.rx_errors++;
+ } else if (eflag & HI3110_ERR_STUFERR) {
cf->data[2] |= CAN_ERR_PROT_STUFF;
- else if (eflag & HI3110_ERR_CRCERR)
+ priv->net->stats.rx_errors++;
+ } else if (eflag & HI3110_ERR_CRCERR) {
cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
- else if (eflag & HI3110_ERR_ACKERR)
+ priv->net->stats.rx_errors++;
+ } else if (eflag & HI3110_ERR_ACKERR) {
cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
+ priv->net->stats.tx_errors++;
+ }
cf->data[6] = hi3110_read(spi, HI3110_READ_TEC);
cf->data[7] = hi3110_read(spi, HI3110_READ_REC);
--
2.43.0
