Remove the CAN_CTRLMODE_3_SAMPLES announcement for CAN-USB/3-FD devices
because these devices don't support it.
The hardware has a Microchip SAM E70 microcontroller that uses a Bosch
MCAN IP core as CAN FD controller. But this MCAN core doesn't support
triple sampling.
Fixes: 80662d943075 ("can: esd_usb: Add support for esd CAN-USB/3")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Stefan Mätje <stefan.maetje@xxxxxx>
---
drivers/net/can/usb/esd_usb.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 41a0e4261d15..03ad10b01867 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -3,7 +3,7 @@
* CAN driver for esd electronics gmbh CAN-USB/2, CAN-USB/3 and CAN-USB/Micro
*
* Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@xxxxxx>
- * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx>
+ * Copyright (C) 2022-2024 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@xxxxxx>
*/
#include <linux/can.h>
@@ -1116,9 +1116,6 @@ static int esd_usb_3_set_bittiming(struct net_device *netdev)
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
flags |= ESD_USB_3_BAUDRATE_FLAG_LOM;
- if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
- flags |= ESD_USB_3_BAUDRATE_FLAG_TRS;
-
baud_x->nom.brp = cpu_to_le16(nom_bt->brp & (nom_btc->brp_max - 1));
baud_x->nom.sjw = cpu_to_le16(nom_bt->sjw & (nom_btc->sjw_max - 1));
baud_x->nom.tseg1 = cpu_to_le16((nom_bt->prop_seg + nom_bt->phase_seg1)
@@ -1219,7 +1216,6 @@ static int esd_usb_probe_one_net(struct usb_interface *intf, int index)
switch (le16_to_cpu(dev->udev->descriptor.idProduct)) {
case ESD_USB_CANUSB3_PRODUCT_ID:
priv->can.clock.freq = ESD_USB_3_CAN_CLOCK;
- priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
priv->can.bittiming_const = &esd_usb_3_nom_bittiming_const;
priv->can.data_bittiming_const = &esd_usb_3_data_bittiming_const;
--
2.34.1
