Re: [PATCH net 1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello:

This series was applied to netdev/net.git (main)
by Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>:

On Mon, 24 Jul 2023 17:01:40 +0200 you wrote:
> After an initial link up the CAN device is in ERROR-ACTIVE mode. Due
> to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to
> STOPPED after a link down:
> 
> | ip link set dev can0 up
> | ip link set dev can0 down
> | ip --details link show can0
> | 13: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
> |     link/can  promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
> |     can state ERROR-ACTIVE restart-ms 1000
> 
> [...]

Here is the summary with links:
  - [net,1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
    https://git.kernel.org/netdev/net/c/f8a2da6ec241
  - [net,2/2] can: raw: fix lockdep issue in raw_release()
    https://git.kernel.org/netdev/net/c/11c9027c983e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux