Hi everyone, This series introduces two new chips tcan-4552 and tcan-4553. The generic driver works in general but needs a few small changes. These are caused by the removal of wake and state pins. v3 removes the check of the devicetree compatible and completely relies on the ID2 register. Based on v6.5-rc1. Best, Markus Changes in v3: - Rebased to v6.5-rc1 - Removed devicetree compatible check in tcan driver. The device version is now unconditionally detected using the ID2 register Changes in v2: - Update the binding documentation to specify tcan4552 and tcan4553 with the tcan4x5x as fallback - Update the driver to use auto detection as well. If compatible differs from the ID2 register, use the ID2 register and print a warning. - Small style changes Previous versions: v2 - https://lore.kernel.org/lkml/20230621093103.3134655-1-msp@xxxxxxxxxxxx/ v1 - https://lore.kernel.org/lkml/20230314151201.2317134-1-msp@xxxxxxxxxxxx Markus Schneider-Pargmann (6): dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants can: tcan4x5x: Remove reserved register 0x814 from writable table can: tcan4x5x: Check size of mram configuration can: tcan4x5x: Rename ID registers to match datasheet can: tcan4x5x: Add support for tcan4552/4553 can: tcan4x5x: Add error messages in probe .../devicetree/bindings/net/can/tcan4x5x.txt | 11 +- drivers/net/can/m_can/m_can.c | 16 ++ drivers/net/can/m_can/m_can.h | 1 + drivers/net/can/m_can/tcan4x5x-core.c | 139 +++++++++++++++--- drivers/net/can/m_can/tcan4x5x-regmap.c | 1 - 5 files changed, 142 insertions(+), 26 deletions(-) base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 -- 2.40.1
