From: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx> Fix the base register defines and their usage for all three card versions Signed-off-by: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx> Link: https://lore.kernel.org/all/20230120112616.6071-4-uttenthaler@xxxxxxxxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/sja1000/ems_pci.c | 37 +++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c index 80fa5e4c5eac..5748c24dd137 100644 --- a/drivers/net/can/sja1000/ems_pci.c +++ b/drivers/net/can/sja1000/ems_pci.c @@ -87,12 +87,23 @@ struct ems_pci_card { */ #define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) -#define EMS_PCI_V1_BASE_BAR 1 -#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */ -#define EMS_PCI_V2_BASE_BAR 2 -#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */ -#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */ -#define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ +#define EMS_PCI_V1_BASE_BAR 1 +#define EMS_PCI_V1_CONF_BAR 0 +#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */ +#define EMS_PCI_V1_CAN_BASE_OFFSET 0x400 /* offset where the controllers start */ +#define EMS_PCI_V1_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ + +#define EMS_PCI_V2_BASE_BAR 2 +#define EMS_PCI_V2_CONF_BAR 0 +#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */ +#define EMS_PCI_V2_CAN_BASE_OFFSET 0x400 /* offset where the controllers start */ +#define EMS_PCI_V2_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ + +#define EMS_PCI_V3_BASE_BAR 0 +#define EMS_PCI_V3_CONF_BAR 5 +#define EMS_PCI_V3_CONF_SIZE 128 /* size of ASIX control area */ +#define EMS_PCI_V3_CAN_BASE_OFFSET 0x00 /* offset where the controllers starts */ +#define EMS_PCI_V3_CAN_CTRL_SIZE 0x100 /* memory size for each controller */ #define EMS_PCI_BASE_SIZE 4096 /* size of controller area */ @@ -225,7 +236,7 @@ static int ems_pci_add_card(struct pci_dev *pdev, struct sja1000_priv *priv; struct net_device *dev; struct ems_pci_card *card; - int max_chan, conf_size, base_bar; + int max_chan, conf_size, base_bar, conf_bar; int err, i; /* Enabling PCI device */ @@ -247,20 +258,28 @@ static int ems_pci_add_card(struct pci_dev *pdev, card->channels = 0; - if (pdev->vendor == PCI_VENDOR_ID_PLX) { + if (pdev->vendor == PCI_VENDOR_ID_ASIX) { + card->version = 3; /* CPC-PCI v3 */ + max_chan = EMS_PCI_V3_MAX_CHAN; + base_bar = EMS_PCI_V3_BASE_BAR; + conf_bar = EMS_PCI_V3_CONF_BAR; + conf_size = EMS_PCI_V3_CONF_SIZE; + } else if (pdev->vendor == PCI_VENDOR_ID_PLX) { card->version = 2; /* CPC-PCI v2 */ max_chan = EMS_PCI_V2_MAX_CHAN; base_bar = EMS_PCI_V2_BASE_BAR; + conf_bar = EMS_PCI_V2_CONF_BAR; conf_size = EMS_PCI_V2_CONF_SIZE; } else { card->version = 1; /* CPC-PCI v1 */ max_chan = EMS_PCI_V1_MAX_CHAN; base_bar = EMS_PCI_V1_BASE_BAR; + conf_bar = EMS_PCI_V1_CONF_BAR; conf_size = EMS_PCI_V1_CONF_SIZE; } /* Remap configuration space and controller memory area */ - card->conf_addr = pci_iomap(pdev, 0, conf_size); + card->conf_addr = pci_iomap(pdev, conf_bar, conf_size); if (!card->conf_addr) { err = -ENOMEM; goto failure_cleanup; -- 2.39.1
