[PATCH 08/12] can: rcar_canfd: Fix R-Car Gen4 DCFG.DSJW field width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On R-Car Gen4 CAN_FD variants, the Data Bit Rate Resynchronization Jump
Width Control (DSJW) field in the Channel n Data Bitrate Configuration
Register (DCFG) register is one bit wider than on older variants.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/net/can/rcar/rcar_canfd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index aa7fcd4a47d38bc9..ee7bbd9d1151201b 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -186,7 +186,7 @@
 #define RCANFD_CERFL_ERR(x)		((x) & (0x7fff)) /* above bits 14:0 */
 
 /* RSCFDnCFDCmDCFG */
-#define RCANFD_DCFG_DSJW(x)		(((x) & 0x7) << 24)
+#define RCANFD_DCFG_DSJW(gpriv, x)	(((x) & reg_gen4(gpriv, 0xf, 0x7)) << 24)
 
 #define RCANFD_DCFG_DTSEG2(gpriv, x) \
 	(((x) & reg_gen4(gpriv, 0x0f, 0x7)) << reg_gen4(gpriv, 16, 20))
@@ -1343,7 +1343,7 @@ static void rcar_canfd_set_bittiming(struct net_device *dev)
 		tseg2 = dbt->phase_seg2 - 1;
 
 		cfg = (RCANFD_DCFG_DTSEG1(gpriv, tseg1) | RCANFD_DCFG_DBRP(brp) |
-		       RCANFD_DCFG_DSJW(sjw) | RCANFD_DCFG_DTSEG2(gpriv, tseg2));
+		       RCANFD_DCFG_DSJW(gpriv, sjw) | RCANFD_DCFG_DTSEG2(gpriv, tseg2));
 
 		rcar_canfd_write(priv->base, RCANFD_F_DCFG(gpriv, ch), cfg);
 		netdev_dbg(priv->ndev, "drate: brp %u, sjw %u, tseg1 %u, tseg2 %u\n",
-- 
2.34.1




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux