Added myself ass module author and fix three code style issues
Signed-off-by: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx>
---
drivers/net/can/sja1000/ems_pci.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index 68fdead6ad74..5c2f4afba2d0 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -21,6 +21,7 @@
#define DRV_NAME "ems_pci"
MODULE_AUTHOR("Sebastian Haas <support@xxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards");
MODULE_LICENSE("GPL v2");
@@ -283,7 +284,6 @@ static int ems_pci_add_card(struct pci_dev *pdev,
conf_bar = EMS_PCI_V3_CONF_BAR;
conf_size = EMS_PCI_V3_CONF_SIZE;
} else if (pdev->vendor == PCI_VENDOR_ID_PLX) {
-
card->version = 2; /* CPC-PCI v2 */
max_chan = EMS_PCI_V2_MAX_CHAN;
base_bar = EMS_PCI_V2_BASE_BAR;
@@ -331,7 +331,8 @@ static int ems_pci_add_card(struct pci_dev *pdev,
/* ASIX chip asserts local reset to CAN controllers
* after bootup until it is deasserted
*/
- writel(readl(card->conf_addr + ASIX_LIEMR) & ~ASIX_LIEMR_LRST, card->conf_addr + ASIX_LIEMR);
+ writel(readl(card->conf_addr + ASIX_LIEMR) & ~ASIX_LIEMR_LRST,
+ card->conf_addr + ASIX_LIEMR);
}
ems_pci_card_reset(card);
@@ -392,7 +393,8 @@ static int ems_pci_add_card(struct pci_dev *pdev,
/* Enable IRQ in AX99100 */
writel(ASIX_LINTSR_INT0AC, card->conf_addr + ASIX_LINTSR);
/* Enable local INT0 input enable */
- writel(readl(card->conf_addr + ASIX_LIEMR) | ASIX_LIEMR_L0EINTEN, card->conf_addr + ASIX_LIEMR);
+ writel(readl(card->conf_addr + ASIX_LIEMR) | ASIX_LIEMR_L0EINTEN,
+ card->conf_addr + ASIX_LIEMR);
}
/* Register SJA1000 device */
--
2.35.3
--
EMS Dr. Thomas Wuensche e.K.
Sonnenhang 3
85304 Ilmmuenster
HR Ingolstadt, HRA 170106
Phone: +49-8441-490260
Fax : +49-8441-81860
http://www.ems-wuensche.com
