TCAN4X5X_ERROR_STATUS is not a status register that needs clearing during interrupt handling. Instead this is a masking register that masks error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register effectively masks everything. Rename the register and mask all error interrupts only once by writing to the register in tcan4x5x_init. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> --- drivers/net/can/m_can/tcan4x5x-core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c index 1fec394b3517..efa2381bf85b 100644 --- a/drivers/net/can/m_can/tcan4x5x-core.c +++ b/drivers/net/can/m_can/tcan4x5x-core.c @@ -10,7 +10,7 @@ #define TCAN4X5X_DEV_ID1 0x04 #define TCAN4X5X_REV 0x08 #define TCAN4X5X_STATUS 0x0C -#define TCAN4X5X_ERROR_STATUS 0x10 +#define TCAN4X5X_ERROR_STATUS_MASK 0x10 #define TCAN4X5X_CONTROL 0x14 #define TCAN4X5X_CONFIG 0x800 @@ -204,12 +204,7 @@ static int tcan4x5x_clear_interrupts(struct m_can_classdev *cdev) if (ret) return ret; - ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_INT_FLAGS, - TCAN4X5X_CLEAR_ALL_INT); - if (ret) - return ret; - - return tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_ERROR_STATUS, + return tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_INT_FLAGS, TCAN4X5X_CLEAR_ALL_INT); } @@ -229,6 +224,11 @@ static int tcan4x5x_init(struct m_can_classdev *cdev) if (ret) return ret; + ret = tcan4x5x_write_tcan_reg(cdev, TCAN4X5X_ERROR_STATUS_MASK, + TCAN4X5X_CLEAR_ALL_INT); + if (ret) + return ret; + /* Zero out the MCAN buffers */ ret = m_can_init_ram(cdev); if (ret) -- 2.38.1
