Currently, userland has no method to query which timestamping features are supported by the peak_usb driver (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way to add hardware timestamp support is to implement ethtool_ops::get_ts_info() in order to advertise the timestamping capabilities and to implement net_device_ops::ndo_eth_ioctl() as requested in [1]. Currently, the driver only supports hardware RX timestamps [2] but not hardware TX. For this reason, the generic function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts() can not be reused and instead this patch adds pcan_get_ts_info() and peak_eth_ioctl(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers [2] https://lore.kernel.org/linux-can/20220727080634.l6uttnbrmwbabh3o@xxxxxxxxxxxxxx/ CC: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> --- drivers/net/can/usb/peak_usb/pcan_usb.c | 1 + drivers/net/can/usb/peak_usb/pcan_usb_core.c | 41 ++++++++++++++++++++ drivers/net/can/usb/peak_usb/pcan_usb_core.h | 1 + drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 1 + drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 1 + 5 files changed, 45 insertions(+) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index d07b7ee79e3e..687dd542f7f6 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -965,6 +965,7 @@ static int pcan_usb_set_phys_id(struct net_device *netdev, static const struct ethtool_ops pcan_usb_ethtool_ops = { .set_phys_id = pcan_usb_set_phys_id, + .get_ts_info = pcan_get_ts_info, }; /* diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index 27b0a72fd885..8c9d53f6e24c 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -775,13 +775,54 @@ static int peak_usb_set_data_bittiming(struct net_device *netdev) return 0; } +static int peak_eth_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct hwtstamp_config hwts_cfg = { 0 }; + + switch (cmd) { + case SIOCSHWTSTAMP: /* set */ + if (copy_from_user(&hwts_cfg, ifr->ifr_data, sizeof(hwts_cfg))) + return -EFAULT; + if (hwts_cfg.tx_type == HWTSTAMP_TX_OFF && + hwts_cfg.rx_filter == HWTSTAMP_FILTER_ALL) + return 0; + return -ERANGE; + + case SIOCGHWTSTAMP: /* get */ + hwts_cfg.tx_type = HWTSTAMP_TX_OFF; + hwts_cfg.rx_filter = HWTSTAMP_FILTER_ALL; + if (copy_to_user(ifr->ifr_data, &hwts_cfg, sizeof(hwts_cfg))) + return -EFAULT; + return 0; + + default: + return -EOPNOTSUPP; + } +} + static const struct net_device_ops peak_usb_netdev_ops = { .ndo_open = peak_usb_ndo_open, .ndo_stop = peak_usb_ndo_stop, + .ndo_eth_ioctl = peak_eth_ioctl, .ndo_start_xmit = peak_usb_ndo_start_xmit, .ndo_change_mtu = can_change_mtu, }; +int pcan_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) +{ + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + info->phc_index = -1; + info->tx_types = BIT(HWTSTAMP_TX_OFF); + info->rx_filters = BIT(HWTSTAMP_FILTER_ALL); + + return 0; +} + /* * create one device which is attached to CAN controller #ctrl_idx of the * usb adapter. diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h index 9c90487b9c92..f6bdd8b3f290 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h @@ -145,5 +145,6 @@ int peak_usb_netif_rx(struct sk_buff *skb, int peak_usb_netif_rx_64(struct sk_buff *skb, u32 ts_low, u32 ts_high); void peak_usb_async_complete(struct urb *urb); void peak_usb_restart_complete(struct peak_usb_device *dev); +int pcan_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info); #endif diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 3d7e0e370505..2ea1500df393 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -1080,6 +1080,7 @@ static int pcan_usb_fd_set_phys_id(struct net_device *netdev, static const struct ethtool_ops pcan_usb_fd_ethtool_ops = { .set_phys_id = pcan_usb_fd_set_phys_id, + .get_ts_info = pcan_get_ts_info, }; /* describes the PCAN-USB FD adapter */ diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 457887113e75..5d8f6a40bb2c 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -1022,6 +1022,7 @@ static int pcan_usb_pro_set_phys_id(struct net_device *netdev, static const struct ethtool_ops pcan_usb_pro_ethtool_ops = { .set_phys_id = pcan_usb_pro_set_phys_id, + .get_ts_info = pcan_get_ts_info, }; /* -- 2.35.1
