During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling")
Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
---
drivers/net/can/sja1000/sja1000.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 2e7638f98cf1..84adf8b5945e 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -402,9 +402,6 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
txerr = priv->read_reg(priv, SJA1000_TXERR);
rxerr = priv->read_reg(priv, SJA1000_RXERR);
- cf->data[6] = txerr;
- cf->data[7] = rxerr;
-
if (isrc & IRQ_DOI) {
/* data overrun interrupt */
netdev_dbg(dev, "data overrun interrupt\n");
@@ -426,6 +423,10 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
else
state = CAN_STATE_ERROR_ACTIVE;
}
+ if (state != CAN_STATE_BUS_OFF) {
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+ }
if (isrc & IRQ_BEI) {
/* bus error interrupt */
priv->can.can_stats.bus_error++;
--
2.35.1
