From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> Upcoming changes on slcan driver will require you to specify a bitrate of value -1 to prevent the open_candev() from failing but at the same time highlighting that it is a fake value. In this case the command `ip --details -s -s link show' would print 4294967295 as the bitrate value. The patch change this value in 0. Link: https://lore.kernel.org/all/20220628163137.413025-5-dario.binacchi@xxxxxxxxxxxxxxxxxxxx Suggested-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> Tested-by: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/dev/netlink.c | 3 ++- include/linux/can/bittiming.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index 037824011266..8efa22d9f214 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -511,7 +511,8 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) if (priv->do_get_state) priv->do_get_state(dev, &state); - if ((priv->bittiming.bitrate && + if ((priv->bittiming.bitrate != CAN_BITRATE_UNSET && + priv->bittiming.bitrate != CAN_BITRATE_UNKNOWN && nla_put(skb, IFLA_CAN_BITTIMING, sizeof(priv->bittiming), &priv->bittiming)) || diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h index 7ae21c0f7f23..ef0a77173e3c 100644 --- a/include/linux/can/bittiming.h +++ b/include/linux/can/bittiming.h @@ -11,6 +11,8 @@ #define CAN_SYNC_SEG 1 +#define CAN_BITRATE_UNSET 0 +#define CAN_BITRATE_UNKNOWN (-1U) #define CAN_CTRLMODE_TDC_MASK \ (CAN_CTRLMODE_TDC_AUTO | CAN_CTRLMODE_TDC_MANUAL) -- 2.35.1
