This patch fixes the typo prescalar -> prescaler. Link: https://lore.kernel.org/all/20220609111424.3819039-1-mkl@xxxxxxxxxxxxxx Reported-by: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx> Cc: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx> Cc: Appana Durga Kedareswara rao <appana.durga.rao@xxxxxxxxxx> Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/xilinx_can.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 70dcb45078bf..393b2d9f9d2a 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -51,7 +51,7 @@ enum xcan_reg { /* only on CAN FD cores */ XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate - * Prescalar + * Prescaler */ XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */ XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */ @@ -430,7 +430,7 @@ static int xcan_set_bittiming(struct net_device *ndev) return -EPERM; } - /* Setting Baud Rate prescalar value in BRPR Register */ + /* Setting Baud Rate prescaler value in BRPR Register */ btr0 = (bt->brp - 1); /* Setting Time Segment 1 in BTR Register */ @@ -447,7 +447,7 @@ static int xcan_set_bittiming(struct net_device *ndev) if (priv->devtype.cantype == XAXI_CANFD || priv->devtype.cantype == XAXI_CANFD_2_0) { - /* Setting Baud Rate prescalar value in F_BRPR Register */ + /* Setting Baud Rate prescaler value in F_BRPR Register */ btr0 = dbt->brp - 1; if (can_tdc_is_enabled(&priv->can)) { if (priv->devtype.cantype == XAXI_CANFD) -- 2.35.1
