As suggested by Vincent, renaming of esd_usb2.c to esd_usb.c
and according to that, adaption of Kconfig and Makfile, too.
Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
---
drivers/net/can/usb/Kconfig | 15 +++++++++++----
drivers/net/can/usb/Makefile | 2 +-
drivers/net/can/usb/{esd_usb2.c => esd_usb.c} | 0
3 files changed, 12 insertions(+), 5 deletions(-)
rename drivers/net/can/usb/{esd_usb2.c => esd_usb.c} (100%)
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index f959215c9d53..1218f9642f33 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -14,11 +14,18 @@ config CAN_EMS_USB
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-config CAN_ESD_USB2
- tristate "ESD USB/2 CAN/USB interface"
+config CAN_ESD_USB
+ tristate "esd electronics gmbh CAN/USB interfaces"
help
- This driver supports the CAN-USB/2 interface
- from esd electronic system design gmbh (http://www.esd.eu).
+ This driver adds supports for several CAN/USB interfaces
+ from esd electronics gmbh (https://www.esd.eu).
+
+ The drivers supports the following devices:
+ - esd CAN-USB/2
+ - esd CAN-USB/Micro
+
+ To compile this driver as a module, choose M here: the module
+ will be called esd_usb.
config CAN_ETAS_ES58X
tristate "ETAS ES58X CAN/USB interfaces"
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index 748cf31a0d53..1ea16be5743b 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
-obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
+obj-$(CONFIG_CAN_ESD_USB) += esd_usb.o
obj-$(CONFIG_CAN_ETAS_ES58X) += etas_es58x/
obj-$(CONFIG_CAN_GS_USB) += gs_usb.o
obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb/
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb.c
similarity index 100%
rename from drivers/net/can/usb/esd_usb2.c
rename to drivers/net/can/usb/esd_usb.c
--
2.25.1
