This patch fixes the typo prescalar -> prescaler.
Reported-by: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
Cc: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xxxxxxxxxx>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/xilinx_can.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 70dcb45078bf..393b2d9f9d2a 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -51,7 +51,7 @@ enum xcan_reg {
/* only on CAN FD cores */
XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate
- * Prescalar
+ * Prescaler
*/
XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */
XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */
@@ -430,7 +430,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
return -EPERM;
}
- /* Setting Baud Rate prescalar value in BRPR Register */
+ /* Setting Baud Rate prescaler value in BRPR Register */
btr0 = (bt->brp - 1);
/* Setting Time Segment 1 in BTR Register */
@@ -447,7 +447,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
if (priv->devtype.cantype == XAXI_CANFD ||
priv->devtype.cantype == XAXI_CANFD_2_0) {
- /* Setting Baud Rate prescalar value in F_BRPR Register */
+ /* Setting Baud Rate prescaler value in F_BRPR Register */
btr0 = dbt->brp - 1;
if (can_tdc_is_enabled(&priv->can)) {
if (priv->devtype.cantype == XAXI_CANFD)
--
2.35.1
