On 03.06.2022 19:28:45, Vincent Mailhol wrote:
> Only a few drivers rely on the CAN rx offload framework (as of the
> writing of this patch, only three: flexcan, ti_hecc and
> mcp251xfd). Give the option to the user to deselect this features
> during compilation.
>
> The drivers relying on CAN rx offload are in different sub
> folders. All of these drivers get tagged with "select CAN_RX_OFFLOAD"
> so that the option is automatically enabled whenever one of those
> driver is chosen.
>
> Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
> ---
> drivers/net/can/Kconfig | 16 ++++++++++++++++
> drivers/net/can/dev/Makefile | 2 ++
> drivers/net/can/spi/mcp251xfd/Kconfig | 1 +
> 3 files changed, 19 insertions(+)
>
> diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
> index 8f3b97aea638..1f1d81da1c8c 100644
> --- a/drivers/net/can/Kconfig
> +++ b/drivers/net/can/Kconfig
> @@ -102,6 +102,20 @@ config CAN_CALC_BITTIMING
>
> If unsure, say Y.
>
> +config CAN_RX_OFFLOAD
> + bool "CAN RX offload"
> + default y
> + help
> + Framework to offload the controller's RX FIFO during one
> + interrupt. The CAN frames of the FIFO are read and put into a skb
> + queue during that interrupt and transmitted afterwards in a NAPI
> + context.
> +
> + The additional features selected by this option will be added to the
> + can-dev module.
> +
> + If unsure, say Y.
> +
> config CAN_AT91
> tristate "Atmel AT91 onchip CAN controller"
> depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM
> @@ -113,6 +127,7 @@ config CAN_FLEXCAN
> tristate "Support for Freescale FLEXCAN based chips"
> depends on OF || COLDFIRE || COMPILE_TEST
> depends on HAS_IOMEM
> + select CAN_RX_OFFLOAD
> help
> Say Y here if you want to support for Freescale FlexCAN.
>
> @@ -162,6 +177,7 @@ config CAN_SUN4I
> config CAN_TI_HECC
> depends on ARM
> tristate "TI High End CAN Controller"
> + select CAN_RX_OFFLOAD
> help
> Driver for TI HECC (High End CAN Controller) module found on many
> TI devices. The device specifications are available from www.ti.com
> diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile
> index b8a55b1d90cd..5081d8a3be57 100644
> --- a/drivers/net/can/dev/Makefile
> +++ b/drivers/net/can/dev/Makefile
> @@ -11,3 +11,5 @@ can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
> can-dev-$(CONFIG_CAN_NETLINK) += rx-offload.o
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Do you want to remove this?
>
> can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
> +
> +can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o
> diff --git a/drivers/net/can/spi/mcp251xfd/Kconfig b/drivers/net/can/spi/mcp251xfd/Kconfig
> index dd0fc0a54be1..877e4356010d 100644
> --- a/drivers/net/can/spi/mcp251xfd/Kconfig
> +++ b/drivers/net/can/spi/mcp251xfd/Kconfig
> @@ -2,6 +2,7 @@
>
> config CAN_MCP251XFD
> tristate "Microchip MCP251xFD SPI CAN controllers"
> + select CAN_RX_OFFLOAD
> select REGMAP
> select WANT_DEV_COREDUMP
> help
I remember I've given you a list of drivers needing RX offload, I
probably missed the m_can driver. Feel free to squash this patch:
--- a/drivers/net/can/dev/Makefile
+++ b/drivers/net/can/dev/Makefile
@@ -8,7 +8,6 @@ can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o
can-dev-$(CONFIG_CAN_NETLINK) += dev.o
can-dev-$(CONFIG_CAN_NETLINK) += length.o
can-dev-$(CONFIG_CAN_NETLINK) += netlink.o
-can-dev-$(CONFIG_CAN_NETLINK) += rx-offload.o
can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index 45ad1b3f0cd0..fc2afab36279 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig CAN_M_CAN
tristate "Bosch M_CAN support"
+ select CAN_RX_OFFLOAD
help
Say Y here if you want support for Bosch M_CAN controller framework.
This is common support for devices that embed the Bosch M_CAN IP.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
