[PATCH net 2/9] can: sja1000: fix use after free in ems_pcmcia_add_card()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>

If the last channel is not available then "dev" is freed.  Fortunately,
we can just use "pdev->irq" instead.

Also we should check if at least one channel was set up.

Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Acked-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Tested-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 drivers/net/can/sja1000/ems_pcmcia.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index e21b169c14c0..4642b6d4aaf7 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -234,7 +234,12 @@ static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
 			free_sja1000dev(dev);
 	}
 
-	err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
+	if (!card->channels) {
+		err = -ENODEV;
+		goto failure_cleanup;
+	}
+
+	err = request_irq(pdev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
 			  DRV_NAME, card);
 	if (!err)
 		return 0;
-- 
2.33.0





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux